[Prev Page][Next Page]
- Re: [PATCH 6/8] [SCSI] mpt2sas : When SCSI command is received with task atrribute not set, set it to SIMPLE
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/8] [SCSI] mpt2sas : Fix for device scan following host reset could get stuck in a infinite loop
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/8] [SCSI] mpt2sas : Fix for issue Missing delay not getting set during system bootup
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- How to online remove an error scsi disk from the system?
- [PATCH 8/8] [SCSI] mpt2sas : Bump driver vesion to v15.100.00.00
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH 7/8] [SCSI] mpt2sas : Calulate the Reply post queue depth calculation as per the MPI spec
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH 6/8] [SCSI] mpt2sas : When SCSI command is received with task atrribute not set, set it to SIMPLE
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH 5/8] [SCSI] mpt2sas : Fix for device scan following host reset could get stuck in a infinite loop
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH 4/8] [SCSI] mpt2sas : Update the timing requirements for issuing a Hard Reset as per the MPI spec
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH 3/8] [SCSI] mpt2sas : MPI2 Rev W (2.00.15) specification
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH 2/8] [SCSI] mpt2sas : Fix for issue Missing delay not getting set during system bootup
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH 1/8] [SCSI] mpt2sas : Add support for OEM specific controller
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- [PATCH] [SCSI] mpt2sas: Description patch
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- Re: [PATCH v8 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH 2/2] target: Fix divide by zero bug in fabric_max_sectors for unconfigured devices
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [PATCH 1/2] target: Fix regression allowing unconfigured devices to fabric port link
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [PATCH 0/2] target: Fix bugs when dealing with unconfigured devices
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] don't wait on disk to start on resume
- From: "dbasehore ." <dbasehore@xxxxxxxxxxxx>
- Re: [PATCH 1/2] don't wait on disk to start on resume
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] don't wait on disk to start on resume
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] don't wait on disk to start on resume
- From: "dbasehore ." <dbasehore@xxxxxxxxxxxx>
- Re: [PATCH 1/2] don't wait on disk to start on resume
- From: "dbasehore ." <dbasehore@xxxxxxxxxxxx>
- Re: [patch 2/2] target: don't truncate the fail intr address
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [patch 1/2] target: don't always say "ipv6" as address type
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- re: [SCSI] be2iscsi: WRB Initialization and Failure code path change
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Ewan Milne <emilne@xxxxxxxxxx>
- [LSF/MM TOPIC] SCSI Express driver
- From: scameron@xxxxxxxxxxxxxxxxxx
- Re: [PATCH v8 4/4] sd: change to auto suspend mode
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v8 2/4] block: add runtime pm helpers
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 53281] New: megaraid_mbox kernel panic during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [patch 2/2] target: don't truncate the fail intr address
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [patch 1/2] target: don't always say "ipv6" as address type
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH 1/1] ipr: Fix oops while resetting an ipr adapter
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 0/1] Fix oops while resetting an ipr adapter
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- Re: [PATCH v8 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v8 2/4] block: add runtime pm helpers
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH 1/6] qla2xxx: Determine the number of outstanding commands based on available resources.
- From: Chad Dupuis <chad.dupuis@xxxxxxxxxx>
- RE: storvsc loops with No Sense messages
- From: KY Srinivasan <kys@xxxxxxxxxxxxx>
- RE: storvsc loops with No Sense messages
- From: KY Srinivasan <kys@xxxxxxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [PATCH v8 2/4] block: add runtime pm helpers
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [PATCH v8 4/4] sd: change to auto suspend mode
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] scsi: storvsc: avoid usage of WRITE_SAME
- From: Olaf Hering <olaf@xxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: walter harms <wharms@xxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: Benny Halevy <bhalevy@xxxxxxxxxx>
- Re: storvsc loops with No Sense messages
- From: Olaf Hering <olaf@xxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: walter harms <wharms@xxxxxx>
- Re: [patch] [SCSI] qla4xxx: don't free NULL dma pool
- From: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: Benny Halevy <bhalevy@xxxxxxxxxx>
- Re: storvsc loops with No Sense messages
- From: Olaf Hering <olaf@xxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: Benny Halevy <bhalevy@xxxxxxxxxx>
- [PATCH v8 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v8 2/4] block: add runtime pm helpers
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v8 1/4] block: add a flag to identify PM request
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v8 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v8 0/4] block layer runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH 0/3] target: Fix zero-length regressions in v3.8-rc1 code
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: walter harms <wharms@xxxxxx>
- [PATCH 6/6] qla2xxx: Correction to the message ids.
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- [PATCH 5/6] qla2xxx: Prevent enabling target mode for unsupported HBAs.
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- [PATCH 1/6] qla2xxx: Determine the number of outstanding commands based on available resources.
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- [PATCH 2/6] qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low.
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- [PATCH 3/6] qla2xxx: Enable target mode support for ISP83xx.
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- [PATCH 0/6] qla2xxx: Patches for scsi "misc" branch.
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- [PATCH 4/6] qla2xxx: Allow ISP81xx to create ATIO queues.
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- Re: [PATCH] target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [patch] [SCSI] libosd: check for kzalloc() failure
- From: walter harms <wharms@xxxxxx>
- Re: [PATCH v3] qla2xxx: silence two GCC warnings
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [PATCH v3] qla2xxx: silence two GCC warnings
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- Re: [PATCH] target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
- From: Asias He <asias@xxxxxxxxxx>
- Re: Re: [PATCH] target: For iblock at default writecache enable.
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [patch] [SCSI] qla4xxx: don't free NULL dma pool
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH] target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [patch] [SCSI] libosd: check for kzalloc() failure
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- RE: mpt2sas: device_blocked question
- From: "Reddy, Sreekanth" <Sreekanth.Reddy@xxxxxxx>
- [scsi:misc 61/65] drivers/scsi/fnic/fnic_scsi.c:441:3: warning: cast from pointer to integer of different size
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [scsi:for-next 14/27] drivers/scsi/qla2xxx/qla_os.c:364 qla2x00_free_req_que() info: redundant null check on req->outstanding_cmds calling kfree()
- From: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
- Re: [PATCH 08/10] fnic: FIP VLAN Discovery Feature Support
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Re: [PATCH] target: For iblock at default writecache enable.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: [scsi:for-next 23/27] drivers/scsi/fnic/fnic_scsi.c:1260 fnic_rport_exch_reset() error: we previously assumed 'sc->device' could be null (see line 1237)
- From: "Hiral Patel (hiralpat)" <hiralpat@xxxxxxxxx>
- [PATCH 07/10] fnic: Fnic Trace Utility
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 09/10] fnic: Kernel panic due to FIP mode misconfiguration
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 05/10] fnic: fnic driver may hit BUG_ON on device reset
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 03/10] fnic:fixing issues in device and firmware reset code
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 06/10] fnic: New debug flags and debug log messages
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 04/10] fnic: Fix SGEs limit
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 08/10] fnic: FIP VLAN Discovery Feature Support
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 10/10] fnic: Incremented driver version
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- Re: [scsi:for-next 23/27] drivers/scsi/fnic/fnic_scsi.c:183:35: sparse: invalid assignment: &=
- From: "Hiral Patel (hiralpat)" <hiralpat@xxxxxxxxx>
- [ANNOUNCE] python-sgutils 0.1
- From: Andy Grover <agrover@xxxxxxxxxx>
- Re: [PATCH] target: For iblock at default writecache enable.
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH] target: For iblock at default writecache enable.
- From: Andy Grover <agrover@xxxxxxxxxx>
- [PATCH 2/3] target: Fix zero-length MODE_SENSE regression
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [PATCH 3/3] target: Fix zero-length READ_CAPACITY_16 regression
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [PATCH 1/3] target: Fix zero-length INQUIRY additional sense code regression
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [PATCH 0/3] target: Fix zero-length regressions in v3.8-rc1 code
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: storvsc loops with No Sense messages
- From: Olaf Hering <olaf@xxxxxxxxx>
- RE: storvsc loops with No Sense messages
- From: KY Srinivasan <kys@xxxxxxxxxxxxx>
- [LSF/MM TOPIC] Making sure soft SCSI Targets are Valid
- From: Lee Duncan <lduncan@xxxxxxxx>
- Re: [PATCH] target: For iblock at default writecache enable.
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: storvsc loops with No Sense messages
- From: Olaf Hering <olaf@xxxxxxxxx>
- [PATCH] mvsas: fixed timeout issue when removing module
- RE: storvsc loops with No Sense messages
- From: KY Srinivasan <kys@xxxxxxxxxxxxx>
- storvsc loops with No Sense messages
- From: Olaf Hering <olaf@xxxxxxxxx>
- [PATCH] block: fix ext_devt_idr handling
- From: Tomas Henzl <thenzl@xxxxxxxxxx>
- Re: [PATCH] [SCSI] advansys: change buildtime warning into runtime error
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [PATCH] aic7xxx_old: silence GCC warnings
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [PATCH v3] qla2xxx: silence two GCC warnings
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- [LSF/MM TOPIC] Thin provisioning SOFT_THRESHOLD error handling
- From: Hannes Reinecke <hare@xxxxxxx>
- Re: [PATCH] drivers/scsi/cxgbi: correcting the include path, so can pass compiling.
- From: Chen Gang <gang.chen@xxxxxxxxxxx>
- RE: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: <Shyam_Iyer@xxxxxxxx>
- Re: [scsi:for-next 23/27] drivers/scsi/fnic/fnic_scsi.c:183:35: sparse: invalid assignment: &=
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [scsi:for-next 14/27] drivers/scsi/qla2xxx/qla_os.c:364 qla2x00_free_req_que() info: redundant null check on req->outstanding_cmds calling kfree()
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] Encapsulate scsi_do_report_luns
- From: Rob Evers <revers@xxxxxxxxxx>
- [PATCH 2/2] Configure reported luns
- From: Rob Evers <revers@xxxxxxxxxx>
- [PATCH 0/2] configure number of LUs reported by 'report-luns'
- From: Rob Evers <revers@xxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v14 1/3] scsi: sr: support runtime pm
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Jeremy Linton <jlinton@xxxxxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Hannes Reinecke <hare@xxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Bart Van Assche <bvanassche@xxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v7 4/4] sd: change to auto suspend mode
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Jeremy Linton <jlinton@xxxxxxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v7 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Hannes Reinecke <hare@xxxxxxx>
- Re: [PATCH v14 1/3] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- mpt2sas: device_blocked question
- From: "spren.gm@xxxxxxxxx" <spren.gm@xxxxxxxxx>
- [PATCH 1/1] Drivers: scsi: storvsc: Initialize the sglist
- From: "K. Y. Srinivasan" <kys@xxxxxxxxxxxxx>
- [PATCH 1/1] Drivers: hv: balloon: Make adjustments to the pressure report
- From: "K. Y. Srinivasan" <kys@xxxxxxxxxxxxx>
- [PATCH 1/1] Drivers: hv: balloon: Make adjustments to the pressure report
- From: "K. Y. Srinivasan" <kys@xxxxxxxxxxxxx>
- Hard Freeze with ASMedia SATA (1b21:0612) (PCIe) and Optical Drive (iHBS112) [Fedora 17]
- From: Reartes Guillermo <rtguille@xxxxxxxxx>
- [PATCH v3] mpt2sas/mpt3sas: prevent double free on error path
- From: Jörn Engel <joern@xxxxxxxxx>
- Re: [PATCH v14 1/3] scsi: sr: support runtime pm
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- [PATCH v2] mpt2sas/mpt3sas: prevent double free on error path
- From: Jörn Engel <joern@xxxxxxxxx>
- Re: [PATCH] mpt2sas: prevent double free on error path
- From: Jörn Engel <joern@xxxxxxxxx>
- Re: [PATCH 1/1] Drivers: scsi: storvsc: Initialize the sglist
- From: Wanlong Gao <gaowanlong@xxxxxxxxxxxxxx>
- RE: [PATCH 1/1] aacraid: 1024 max outstanding command support
- From: "Mahesh Rajashekhara" <Mahesh.Rajashekhara@xxxxxxxx>
- [PATCH] target: For iblock at default writecache enable.
- From: majianpeng <majianpeng@xxxxxxxxx>
- [PATCH 1/1] Drivers: scsi: storvsc: Initialize the sglist
- From: "K. Y. Srinivasan" <kys@xxxxxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Hannes Reinecke <hare@xxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Hannes Reinecke <hare@xxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Bart Van Assche <bart.vanassche@xxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: linux-3.7.4: BUG: unable to handle kernel NULL pointer dereference at target_fabric_port_link
- From: Kouichi ONO <kou1.ono@xxxxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Hannes Reinecke <hare@xxxxxxx>
- Re: linux-3.7.4: BUG: unable to handle kernel NULL pointer dereference at target_fabric_port_link
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [PATCH] mpt2sas: prevent double free on error path
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: Bart Van Assche <bart.vanassche@xxxxxxxxx>
- [PATCH] mpt2sas: prevent double free on error path
- From: Jörn Engel <joern@xxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 4/9] [SCSI] Rename scsi_evt_xxx to sdev_evt_xxx and scsi_event to sdev_event
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 4/9] [SCSI] Rename scsi_evt_xxx to sdev_evt_xxx and scsi_event to sdev_event
- From: Ewan Milne <emilne@xxxxxxxxxx>
- [RESEND PATCH] libiscsi: avoid unnecessary multiple NULL assignments
- From: Masatake YAMATO <yamato@xxxxxxxxxx>
- linux-3.7.4: BUG: unable to handle kernel NULL pointer dereference at target_fabric_port_link
- From: Kouichi ONO <kou1.ono@xxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: Hannes Reinecke <hare@xxxxxxx>
- device_blocked with mpt2sas
- From: "spren.gm@xxxxxxxxx" <spren.gm@xxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: Hannes Reinecke <hare@xxxxxxx>
- [PATCH v14 1/3] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v14 2/3] libata: scsi: no poll when ODD is powered off
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v14 3/3] scsi: remove can_power_off flag from scsi_device
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v14 0/3] ZPODD Patches
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH 10/15] drivers/scsi/csiostor/csio_lnode.c: adjust duplicate test
- From: Naresh Kumar Inna <naresh@xxxxxxxxxxx>
- Re: [usb-storage] Re: Fwd: 2TB USB hard drive for backing up
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH RFC 4/9] [SCSI] Rename scsi_evt_xxx to sdev_evt_xxx and scsi_event to sdev_event
- From: Bart Van Assche <bart.vanassche@xxxxxxxxx>
- Re: [PATCH RFC 4/9] [SCSI] Rename scsi_evt_xxx to sdev_evt_xxx and scsi_event to sdev_event
- From: Bart Van Assche <bart.vanassche@xxxxxxxxx>
- Re: [usb-storage] Re: Fwd: 2TB USB hard drive for backing up
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] Re: Fwd: 2TB USB hard drive for backing up
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [usb-storage] Re: Fwd: 2TB USB hard drive for backing up
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC 8/9] [SCSI] Add sense and Unit Attention generation to scsi_debug
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: Ewan Milne <emilne@xxxxxxxxxx>
- Re: Fwd: 2TB USB hard drive for backing up
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Fwd: 2TB USB hard drive for backing up
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH v13 8/9] libata: do not suspend port if normal ODD is attached
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: Fwd: 2TB USB hard drive for backing up
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [RFC PATCH] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [Bug 52911] 3w-9xxx BUG on insmod with 9650-4LPML and Quanta S45 MB
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH 5/15] drivers/scsi/bnx2fc/bnx2fc_io.c: adjust duplicate test
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [BUG] 3w-9xxx BUG in 2.6.32
- From: James Lamanna <james@xxxxxxxxxxxx>
- [Bug 52911] New: 3w-9xxx BUG on insmod with 9650-4LPML and Quanta S45 MB
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v13 8/9] libata: do not suspend port if normal ODD is attached
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- Re: [RFC PATCH] scsi: sr: support runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v7 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH 5/15] drivers/scsi/bnx2fc/bnx2fc_io.c: adjust duplicate test
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH 10/15] drivers/scsi/csiostor/csio_lnode.c: adjust duplicate test
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [LSF/MM TOPIC] I_T Nexus loss SCSI error handling
- From: Hannes Reinecke <hare@xxxxxxx>
- [RFC PATCH] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v13 2/9] libata: identify and init ZPODD devices
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v13 2/9] libata: identify and init ZPODD devices
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Julian Calaby <julian.calaby@xxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: Hannes Reinecke <hare@xxxxxxx>
- [PATCH 03/10] qla4xxx: Quiesce driver activities while loopback
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 05/10] qla4xxx: Throttle active IOCBs to firmware limits
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 07/10] qla4xxx: Added support for force firmware dump
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 01/10] qla4xxx: Add spurious interrupt messages under debug level 2
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 09/10] qla4xxx: Fix return code for qla4xxx_session_get_param.
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 10/10] qla4xxx: Update driver version to 5.03.00-k4
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 08/10] qla4xxx: wait for boot target login response during probe.
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 04/10] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 06/10] qla4xxx: Re-register IRQ handler while retrying initialize of adapter
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 02/10] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 00/10] qla4xxx: Updates for scsi "misc" branch
- From: vikas.chaudhary@xxxxxxxxxx
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Julian Calaby <julian.calaby@xxxxxxxxx>
- Re: [PATCH] drivers/scsi/cxgbi: correcting the include path, so can pass compiling.
- From: Chen Gang <gang.chen@xxxxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC 8/9] [SCSI] Add sense and Unit Attention generation to scsi_debug
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [patch] target: change sprintf to snprintf
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v7 4/4] sd: change to auto suspend mode
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] scsi:gdth.c: fix compilation warning
- From: Cong Ding <dinggnu@xxxxxxxxx>
- Re: [patch] target: change sprintf to snprintf
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH RFC 9/9] [SCSI] Streamline detection of FM/EOM/ILI status
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 8/9] [SCSI] Add sense and Unit Attention generation to scsi_debug
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 6/9] [SCSI] Generate uevents for certain Unit Attention codes
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 7/9] [SCSI] Add sysfs support for enhanced Unit Attention handling
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 5/9] [SCSI] Add support for scsi_target events
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 4/9] [SCSI] Rename scsi_evt_xxx to sdev_evt_xxx and scsi_event to sdev_event
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 2/9] [SCSI] Generate uevent on sd capacity change
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 3/9] [SCSI] Add a kernel config option for enhanced Unit Attention support
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling
- From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [patch] target: change sprintf to snprintf
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: Talking to reset disk without device node
- From: Hannes Reinecke <hare@xxxxxxx>
- Talking to reset disk without device node
- From: Jan Engelhardt <jengelh@xxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [Announce] sg3_utils-1.35 available
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- LSF/MM Summit CFP
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- [PATCH V2 5/8] ipr: Reduce lock contention
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 6/8] ipr: Implement block iopoll
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 4/8] ipr: Add support for MSI-X and distributed completion
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 2/8] ipr: Handler ID memory allocation failure
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 8/8] ipr: Fix sparse error in ipr driver
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 7/8] ipr: Driver version 2.6.0
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 3/8] ipr: Resource path error logging cleanup
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 0/8] Add support for new IBM SAS controllers
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH V2 1/8] ipr: Add sereral new CCIN definitions for new adapters support
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH] cxgb4i: Remove the scsi host device when removing device
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: vinayak holikatti <vinholikatti@xxxxxxxxx>
- Re: [PATCH v13 1/9] scsi: sr: support runtime pm
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v7 0/4] block layer runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v7 2/4] block: add runtime pm helpers
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v7 1/4] block: add a flag to identify PM request
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v7 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v7 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] virtio-scsi: reset virtqueue affinity when doing cpu hotplug
- From: Wanlong Gao <gaowanlong@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] virtio-scsi: reset virtqueue affinity when doing cpu hotplug
- From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
- [GIT PULL] target fixes for v3.8-rc4
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- [PATCH] scsi_transport_fc: Make 'port_state' writeable
- From: Hannes Reinecke <hare@xxxxxxx>
- [PATCH 2/2] virtio-scsi: reset virtqueue affinity when doing cpu hotplug
- From: Wanlong Gao <gaowanlong@xxxxxxxxxxxxxx>
- [PATCH 1/2] virtio-scsi: split out request queue set affinity function
- From: Wanlong Gao <gaowanlong@xxxxxxxxxxxxxx>
- [PATCH v13 3/9] libata: move acpi notification code to zpodd
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 4/9] libata: check zero power ready status for ZPODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 7/9] libata: scsi: no poll when ODD is powered off
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 9/9] scsi: remove can_power_off flag from scsi_device
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 6/9] libata: expose pm qos flags for ata device
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 8/9] libata: do not suspend port if normal ODD is attached
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 5/9] libata: handle power transition of ODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 2/9] libata: identify and init ZPODD devices
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v13 0/9] ZPODD Patches
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [Resend PATCH 3/3] scsi: sd: remove unnecessary initialization in sd_probe()
- From: Guo Chao <yan@xxxxxxxxxxxxxxxxxx>
- [Resend PATCH 1/3] scsi: sd: set valid return value in failed path
- From: Guo Chao <yan@xxxxxxxxxxxxxxxxxx>
- [Resend PATCH 2/3] scsi: sd: no need to set gendisk->minors in sd_probe_async()
- From: Guo Chao <yan@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/8] V2 Add support for new IBM SAS controllers
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
- Re: xhci problem
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: [PATCH] Fix libata-eh don't retry command after reset succeeded.
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH 6/8] V2 ipr: Implement block iopoll
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- Re: [PATCH v6 0/4] block layer runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix libata-eh don't retry command after reset succeeded.
- From: Mark Lord <kernel@xxxxxxxxxxxx>
- Re: [PATCH] Fix libata-eh don't retry command after reset succeeded.
- From: Mark Lord <kernel@xxxxxxxxxxxx>
- Re: [PATCH v5 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v6 0/4] block layer runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v6 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH] drivers/scsi/cxgbi: correcting the include path, so can pass compiling.
- From: Chen Gang <gang.chen@xxxxxxxxxxx>
- Re: linux-next: build failure after merge of the scsi tree
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- Re: [PATCH 6/8] V2 ipr: Implement block iopoll
- From: Asias He <asias.hejun@xxxxxxxxx>
- [PATCH 6/8] V2 ipr: Implement block iopoll
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 7/8] V2 ipr: Driver version 2.6.0
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 4/8] V2 ipr: Add support for MSI-X and distributed completion
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 3/8] V2 ipr: Resource path error logging cleanup
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 5/8] V2 ipr: Reduce lock contention
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 8/8] V2 ipr: Fix sparse error in ipr driver
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 0/8] V2 Add support for new IBM SAS controllers
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 2/8] V2 ipr: Handler ID memory allocation failure
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 1/8] V2 ipr: Add sereral new CCIN definitions for new adapters support
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH] cxgb4i: Remove the scsi host device when removing device
- From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: linux-next: build failure after merge of the scsi tree
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: linux-next: build failure after merge of the scsi tree
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
- [PATCH v1 1/1] block: blk-merge: don't merge the pages with non-contiguous descriptors
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: linux-next: build failure after merge of the scsi tree
- From: Greg KH <greg@xxxxxxxxx>
- Re: linux-next: build failure after merge of the scsi tree
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: linux-next: build failure after merge of the scsi tree
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
- RE: [patch] [SCSI] bfa: fix strncpy() limiter in bfad_start_ops()
- From: Anil Gurumurthy <agurumur@xxxxxxxxxxx>
- [v2 PATCH 3/8] bnx2fc: support software fcoe target
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- Re: linux-next: build failure after merge of the scsi tree
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn)
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] target: Remove never-used TMR_FABRIC_TMR enum value
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] target: Remove useless if statement
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/5] target: Release se_cmd when LUN lookup fails for TMR
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] target: Fix use-after-free in LUN RESET handling
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] target: Don't let abort handling free pending write commands too soon
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v12 4/9] libata: check zero power ready status for ZPODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v12 8/9] libata: do not suspend port if normal ODD is attached
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v12 6/9] libata: expose pm qos flags for ata device
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v12 5/9] libata: handle power transition of ODD
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v12 4/9] libata: check zero power ready status for ZPODD
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v12 3/9] libata: move acpi notification code to zpodd
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v12 2/9] libata: identify and init ZPODD devices
- From: Tejun Heo <tj@xxxxxxxxxx>
- mvsas troubles with RocketRaid 2760A (multiple 88SE9485)
- From: Bryn Hughes <linux@xxxxxxxxxx>
- [PATCH 1/1] aacraid: 1024 max outstanding command support
- From: Mahesh Rajashekhara <Mahesh_Rajashekhara@xxxxxxxxxxxxxx>
- [PATCH v12 3/9] libata: move acpi notification code to zpodd
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 4/9] libata: check zero power ready status for ZPODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 7/9] libata: scsi: no poll when ODD is powered off
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 8/9] libata: do not suspend port if normal ODD is attached
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 9/9] scsi: remove can_power_off flag from scsi_device
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 6/9] libata: expose pm qos flags for ata device
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 5/9] libata: handle power transition of ODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 2/9] libata: identify and init ZPODD devices
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v12 0/9] ZPODD Patches
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [patch] [SCSI] bfa: fix strncpy() limiter in bfad_start_ops()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: vinayak holikatti <vinholikatti@xxxxxxxxx>
- Re: [PATCH v11 0/9] ZPODD Patches
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v11 0/9] ZPODD Patches
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- RE: [PATCH v11 0/9] ZPODD Patches
- From: "Wu, Jeff" <Jeff.Wu@xxxxxxx>
- RE: [PATCH -next] [SCSI] mpt3sas: remove unused variables
- From: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@xxxxxxx>
- Re: [PATCH v11 7/9] libata: expose pm qos flags for ata device
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v11 3/9] libata: identify and init ZPODD devices
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH 5/5] kfifo: log based kfifo API
- From: Yuanhan Liu <yuanhan.liu@xxxxxxxxxxxxxxx>
- Re: [PATCH] target: initialize sense_reason_t ret in core_scsi3_emulate_pro_register()
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [PATCH] mvsas: use correct sas_device_type.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: [PATCH 5/5] kfifo: log based kfifo API
- From: Andy Walls <awalls@xxxxxxxxxxxxxxxx>
- Re: FCoE Updates for 3.8 (v2)
- From: "Love, Robert W" <robert.w.love@xxxxxxxxx>
- Re: [PATCH 5/5] kfifo: log based kfifo API
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v11 3/9] libata: identify and init ZPODD devices
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v6 0/4] block layer runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 5/5] kfifo: log based kfifo API
- From: Yuanhan Liu <yuanhan.liu@xxxxxxxxxxxxxxx>
- Re: [PATCH v11 6/9] libata: handle power transition of ODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v11 5/9] libata: check zero power ready status for ZPODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v11 3/9] libata: identify and init ZPODD devices
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v6 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v6 0/4] block layer runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH 0/3] qla4xxx: Updates for scsi "misc" branch
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
- [PATCH] iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn)
- From: Roland Dreier <roland@xxxxxxxxxx>
- Re: [PATCH] iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around
- From: Roland Dreier <roland@xxxxxxxxxxxxxxx>
- Re: [PATCH v11 0/9] ZPODD Patches
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v11 6/9] libata: handle power transition of ODD
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v11 8/9] libata: no poll when ODD is powered off
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v11 7/9] libata: expose pm qos flags for ata device
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v11 5/9] libata: check zero power ready status for ZPODD
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v11 4/9] libata: move acpi notification code to zpodd
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v11 3/9] libata: identify and init ZPODD devices
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v11 2/9] libata: Add CONFIG_SATA_ZPODD
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v6 3/4] block: implement runtime pm strategy
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 2/4] block: add runtime pm helpers
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 0/4] block layer runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] hpsa: update version number to 3.2.0
- From: "Stephen M. Cameron" <scameron@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v6 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v6 4/4] sd: change to auto suspend mode
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
- Re: [PATCH v11 9/9] libata: do not suspend port if normal ODD is attached
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
- DVD write speed 24x or 62x ?
- From: Toralf Förster <toralf.foerster@xxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH V5 1/4] [SCSI] drivers/scsi/ufs: Seggregate PCI Specific Code
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH v11 9/9] libata: do not suspend port if normal ODD is attached
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH v6 3/4] block: implement runtime pm strategy
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v6 1/4] block: add a flag to identify PM request
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v6 2/4] block: add runtime pm helpers
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v6 4/4] sd: change to auto suspend mode
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v6 0/4] block layer runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 6/9] libata: handle power transition of ODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 5/9] libata: check zero power ready status for ZPODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 8/9] libata: no poll when ODD is powered off
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 9/9] libata: do not suspend port if normal ODD is attached
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 7/9] libata: expose pm qos flags for ata device
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 4/9] libata: move acpi notification code to zpodd
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 1/9] scsi: sr: support runtime pm
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 3/9] libata: identify and init ZPODD devices
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 2/9] libata: Add CONFIG_SATA_ZPODD
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [PATCH v11 0/9] ZPODD Patches
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH] [SCSI] sr: Fix multi-drive performance by using per-device mutexes
- From: Otto Meta <otto.kernel.02e4af24@xxxxxxxxxxxxxxxx>
- Re: [PATCH] [SCSI] sr: Fix multi-drive performance by using per-device mutexes
- From: Wakko Warner <wakko@xxxxxxxxxxxx>
- Re: [PATCH] [SCSI] sr: Fix multi-drive performance by using per-device mutexes
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 04/12] [SCSI] qla2xxx: Use standard PCIe Capability Link register field names
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Ping^2 Re: [PATCH v3 0/2] add per-device sysfs knob to enable unrestricted, unprivileged SG_IO
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: vinayak holikatti <vinholikatti@xxxxxxxxx>
- Re: [PATCH V5 1/4] [SCSI] drivers/scsi/ufs: Seggregate PCI Specific Code
- From: vinayak holikatti <vinholikatti@xxxxxxxxx>
- Re: [PATCH v9 06/10] ata: zpodd: check zero power ready status
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH] [SCSI] sr: Fix multi-drive performance by using per-device mutexes
- From: Otto Meta <otto.kernel.02e4af24@xxxxxxxxxxxxxxxx>
- [PATCH 11/11] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 10/11] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 9/11] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 8/11] lpfc 8.3.37: Provide support for FCoE protocol dual-chute (ULP) operation
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 7/11] lpfc 8.3.37: Fixed stale ndlp state when the node is marked for deferred removal.
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 6/11] lpfc 8.3.37: Fix potential memory corruption bug
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 5/11] lpfc 8.3.37: Fixed no-context ABTS failed with BA_RJT
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 4/11] lpfc 8.3.37: Removed use of NOP mailboxes for interrupt verification
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 3/11] lpfc 8.3.37: Fixed exhausted retry for plogi to nameserver.
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 2/11] lpfc 8.3.37: Fixed ELS_REC received on the unsolicited receive queue
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 1/11] lpfc 8.3.37: Provide support for change_queue_type
- From: James Smart <james.smart@xxxxxxxxxx>
- [PATCH 0/11] lpfc 8.3.37: Update lpfc to revision 8.3.37
- From: James Smart <james.smart@xxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [PATCH -v2 16/26] scsi: rename random32() to prandom_u32()
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [scsi:for-next 11/19] drivers/scsi/ipr.c:8700:16: warning: array subscript is above array bounds
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Wanlong Gao <gaowanlong@xxxxxxxxxxxxxx>
- Re: [scsi:for-next 11/19] drivers/scsi/ipr.c:8700:16: warning: array subscript is above array bounds
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- Re: [PATCH 1/2] RESEND ipr: Implement block iopoll
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] ipr: Fix several unlock issues in ipr driver
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] ipr: Fix several unlock issues in ipr driver
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 0/1] Fix several unlock issues in ipr driver
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 4/5] target: Remove useless if statement
- From: Roland Dreier <roland@xxxxxxxxxx>
- [PATCH 5/5] target: Remove never-used TMR_FABRIC_TMR enum value
- From: Roland Dreier <roland@xxxxxxxxxx>
- [PATCH 1/5] target: Don't let abort handling free pending write commands too soon
- From: Roland Dreier <roland@xxxxxxxxxx>
- [PATCH 2/5] target: Fix use-after-free in LUN RESET handling
- From: Roland Dreier <roland@xxxxxxxxxx>
- [PATCH 3/5] target: Release se_cmd when LUN lookup fails for TMR
- From: Roland Dreier <roland@xxxxxxxxxx>
- [PATCH 0/5] target task management fixes and cleanups
- From: Roland Dreier <roland@xxxxxxxxxx>
- Re: [PATCH 0/2] RESEND Add support for new IBM SAS controllers
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- Re: [PATCH 0/2] RESEND Add support for new IBM SAS controllers
- From: Bart Van Assche <bvanassche@xxxxxxx>
- [PATCH 1/2] RESEND ipr: Implement block iopoll
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 2/2] RESEND ipr: Driver version 2.6.0
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [PATCH 0/2] RESEND Add support for new IBM SAS controllers
- From: wenxiong@xxxxxxxxxxxxxxxxxx
- [Bug 48891] scsi/lpfc/lpfc_ct.c:637: possible finger trouble ?
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
- [PATCH] [SCSI] sr: Fix multi-drive performance by using per-device mutexes
- From: Otto Meta <otto.kernel.02e4af24@xxxxxxxxxxxxxxxx>
- What does scsi IO state flag 0x0C (= 0x08 && 0x04 == terminated && no scsi status) mean?
- From: CrashPlan Pro <linux-scsi@xxxxxxxxxxxxx>
- Re: [PATCH 0/2] Change type-2 dif to use rq embedded 32 byte cdb
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- [PATCH] [SCSI] mpt3sas: remove pointless version.h include from mpt3sas_trigger_diag.c
- From: Jesper Juhl <jj@xxxxxxxxxxxxx>
- [PATCH 1/3] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 0/3] qla4xxx: Updates for scsi "misc" branch
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 2/3] qla4xxx: Correct the validation to check in get_sys_info mailbox
- From: vikas.chaudhary@xxxxxxxxxx
- [PATCH 3/3] qla4xxx: Update driver version to 5.03.00-k3
- From: vikas.chaudhary@xxxxxxxxxx
- Re: megaraid_sas: problem with specific hardware only with kernel 3.2.5 and above
- From: Ron A <linux-scsi@xxxxxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] a100u2w: Added sanitization for pointer dereference using a value from hardware. Detected using Carburizer (http://lwn.net/Articles/479653/)
- From: Asim Kadav <kadav@xxxxxxxxxxx>
- Re: [PATCH v9 06/10] ata: zpodd: check zero power ready status
- From: Tejun Heo <tj@xxxxxxxxxx>
- Request for Information Required for Linux Kernel Hard Lockup with PCMCIA SYM53C895a Card
- From: "John L. Males" <jlmales@xxxxxxxxx>
- Re: [PATCH] [SCSI] csiostor: Don't leak mem or fail to release firmware in csio_hw_flash_config()
- From: Naresh Kumar Inna <naresh@xxxxxxxxxxx>
- Re: [PATCH V5 2/4] [SCSI] drivers/scsi/ufs: Separate PCI code into glue driver
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH] a100u2w: Added sanitization for pointer dereference using a value from hardware. Detected using Carburizer (http://lwn.net/Articles/479653/)
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V5 1/4] [SCSI] drivers/scsi/ufs: Seggregate PCI Specific Code
- From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
- Re: [PATCH] a100u2w: Added sanitization for pointer dereference using a value from hardware. Detected using Carburizer (http://lwn.net/Articles/479653/)
- From: Asim Kadav <kadav@xxxxxxxxxxx>
- Re: [PATCH] a100u2w: Added sanitization for pointer dereference using a value from hardware. Detected using Carburizer (http://lwn.net/Articles/479653/)
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH] a100u2w: Added sanitization for pointer dereference using a value from hardware. Detected using Carburizer (http://lwn.net/Articles/479653/)
- From: Asim Kadav <kadav@xxxxxxxxxxx>
- Re: [PATCH] iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around
- From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
- [PATCH] [SCSI] csiostor: Don't leak mem or fail to release firmware in csio_hw_flash_config()
- From: Jesper Juhl <jj@xxxxxxxxxxxxx>
- [PATCH V5 0/4] [SCSI] ufs: Adds glue drivers to ufshcd
- From: vinholikatti@xxxxxxxxx
- [PATCH V5 2/4] [SCSI] drivers/scsi/ufs: Separate PCI code into glue driver
- From: vinholikatti@xxxxxxxxx
- [PATCH V5 4/4] [SCSI] ufs: Correct the expected data transfer size
- From: vinholikatti@xxxxxxxxx
- [PATCH V5 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
- From: vinholikatti@xxxxxxxxx
- [PATCH V5 1/4] [SCSI] drivers/scsi/ufs: Seggregate PCI Specific Code
- From: vinholikatti@xxxxxxxxx
- Re: [PATCH v9 06/10] ata: zpodd: check zero power ready status
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- [RFC PATCH] [SCSI] sd: When no media present ignore WCE in suspend/shutdown
- From: Andreas Bombe <aeb@xxxxxxxxxx>
- Re: [PATCH v9 06/10] ata: zpodd: check zero power ready status
- From: Tejun Heo <tj@xxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: Wanlong Gao <gaowanlong@xxxxxxxxxxxxxx>
- [Bug 31212] aacraid is generally unstable with newer kernels
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 31212] aacraid is generally unstable with newer kernels
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 31212] aacraid is generally unstable with newer kernels
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 31212] aacraid is generally unstable with newer kernels
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- RE: [PATCH] bfa: avoid buffer overrun for 12-byte model name
- From: Vijay Mohan Guvva <vmohan@xxxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v2 0/5] Multiqueue virtio-scsi, and API for piecewise buffer submission
- From: Wanlong Gao <gaowanlong@xxxxxxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- RE: [Bug 51881] New: HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: "Jack Wang" <jack_wang@xxxxxxxxx>
- Re: mvsas regression since 3.5
- From: Drunkard Zhang <gongfan193@xxxxxxxxx>
- [PATCH 16/29] scsi: rename random32() to prandom_u32()
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- RE: mvsas regression since 3.5
- From: "Jack Wang" <jack_wang@xxxxxxxxx>
- Re: [PATCH 1/2] don't wait on disk to start on resume
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: mvsas regression since 3.5
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: mvsas regression since 3.5
- From: Drunkard Zhang <gongfan193@xxxxxxxxx>
- Re: mvsas regression since 3.5
- From: Xi Wang <xi.wang@xxxxxxxxx>
- [PATCH] target: initialize sense_reason_t ret in core_scsi3_emulate_pro_register()
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- mvsas regression since 3.5
- From: Drunkard Zhang <gongfan193@xxxxxxxxx>
- [Bug 48891] scsi/lpfc/lpfc_ct.c:637: possible finger trouble ?
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 48871] drivers/scsi/lpfc/lpfc_init.c: 2 * Buffer is accessed out of bounds
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [PATCH 4/8] bnx2fc: Move offload/upload wait logic into a function
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 5/8] bnx2fc: Map the doorbell register between offload and enable requests
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 8/8] bnx2fc: Bumped version to 1.0.13
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 7/8] bnx2fc: Support max IO size to 512KB
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 6/8] bnx2fc: Tx/Rx byte counts reset to 0 when exceeding 32 bit values
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 1/8] bnx2fc: remove useless calls to memset().
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 2/8] bnx2fc: Remove potential NULL dereference
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 3/8] bnx2fc: support software fcoe target
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- [PATCH 0/8] bnx2fc version 1.0.13
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- mpt2sas: SATA Initialization Failed - Linux does not create any block devices for PUIS drives behind SAS expander
- From: CrashPlan Pro <linux-scsi@xxxxxxxxxxxxx>
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 51881] HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 51881] New: HighPoint RocketRAID 2720 fail to detect some SATA hdd
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [scsi:for-next 12/27] drivers/scsi/ipr.c:6568 ipr_qc_issue() warn: inconsistent returns spin_lock:&ipr_cmd->hrrq->_lock: locked (6562) unlocked (6499,6507,6568)
- From: James Bottomley <jbottomley@xxxxxxxxxxxxx>
- UAPI: What remains to be pulled: SCSI and FCoE
- From: David Howells <dhowells@xxxxxxxxxx>
- Re: [PATCH v9 06/10] ata: zpodd: check zero power ready status
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: Odd behavior of a "SAS-2" backplane with SGPIO commands
- From: Pasi Kärkkäinen <pasik@xxxxxx>
- Re: Odd behavior of a "SAS-2" backplane with SGPIO commands
- From: Pasi Kärkkäinen <pasik@xxxxxx>
- Re: [PATCH 06/10] fnic: New debug flags and debug log messages
- From: "Hiral Patel (hiralpat)" <hiralpat@xxxxxxxxx>
- [PATCH 06/10] fnic: New debug flags and debug log messages
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- RE: [PATCH 0/2] Change type-2 dif to use rq embedded 32 byte cdb
- From: "Elliott, Robert (Server Storage)" <Elliott@xxxxxx>
- Re: [PATCH 0/2] Change type-2 dif to use rq embedded 32 byte cdb
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: SCSI mid layer and high IOPS capable devices
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
- Re: [PATCH 0/2] Change type-2 dif to use rq embedded 32 byte cdb
- From: Rob Evers <revers@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Stefan Hajnoczi <stefanha@xxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 0/5] Multiqueue virtio-scsi, and API for piecewise buffer submission
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
- Re: [PATCH 0/2] Change type-2 dif to use rq embedded 32 byte cdb
- From: Scott Guthridge <guthridg@xxxxxxxxxx>
- Re: megaraid_sas: problem with specific hardware only with kernel 3.2.5 and above
- From: Matthias Prager <linux@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 06/10] fnic: New debug flags and debug log messages
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] Multiqueue virtio-scsi, and API for piecewise buffer submission
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 0/5] Multiqueue virtio-scsi, and API for piecewise buffer submission
- From: Rolf Eike Beer <eike-kernel@xxxxxxxxx>
- [kbuild] [scsi:for-next 12/27] drivers/scsi/ipr.c:4883:17: sparse: context imbalance in '__ipr_eh_dev_reset' - different lock contexts for basic block
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] megaraid: convert to work_struct
- From: Tejun Heo <tj@xxxxxxxxxx>
- megaraid_sas: problem with specific hardware only with kernel 3.2.5 and above
- From: Michał Miszewski <michal.miszewski@xxxxxxxxxx>
- Re: [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH] scsi: remove device when state is changed to deleted thru sysfs
- From: David Milburn <dmilburn@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- [PATCH v2] [SCSI] mpt2sas: fix for driver fails EEH, recovery from injected pci bus error
- From: Tomas Henzl <thenzl@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 0/5] Multiqueue virtio-scsi, and API for piecewise buffer submission
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH] [SCSI] mpt2sas: fix for driver fails EEH recovery from injected pci bus error
- From: Tomas Henzl <thenzl@xxxxxxxxxx>
- Re: [PATCH v2 2/5] virtio-scsi: use functions for piecewise composition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2 2/5] virtio-scsi: use functions for piecewise composition of buffers
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- [PATCH v2 0/5] Multiqueue virtio-scsi, and API for piecewise buffer submission
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- [PATCH v2 3/5] virtio-scsi: redo allocation of target data
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- [PATCH v2 2/5] virtio-scsi: use functions for piecewise composition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- [PATCH v2 1/5] virtio: add functions for piecewise addition of buffers
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- [PATCH v2 4/5] virtio-scsi: pass struct virtio_scsi to virtqueue completion function
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- [PATCH v2 5/5] virtio-scsi: introduce multiqueue support
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [GIT PULL] exofs: 3 changes to exofs & osd
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [GIT PULL] exofs: 3 changes to exofs & osd
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] exofs: 3 changes to exofs & osd
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [GIT PULL] exofs: 3 changes to exofs & osd
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v9 06/10] ata: zpodd: check zero power ready status
- From: Aaron Lu <aaron.lu@xxxxxxxxx>
- Re: [PATCH] scsi: remove device when state is changed to deleted thru sysfs
- From: Bart Van Assche <bvanassche@xxxxxxx>
- RE: [PATCH] [SCSI] mpt2sas: fix for driver fails EEH recovery from injected pci bus error
- From: "Reddy, Sreekanth" <Sreekanth.Reddy@xxxxxxx>
- Re: [PATCH 05/10] fnic: fnic driver may hit BUG_ON on device reset
- From: "Hiral Patel (hiralpat)" <hiralpat@xxxxxxxxx>
- [PATCH 08/10] fnic: FIP VLAN Discovery Feature Support
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 07/10] fnic: Fnic Trace Utility
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 06/10] fnic: New debug flags and debug log messages
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH 05/10] fnic: fnic driver may hit BUG_ON on device reset
- From: Hiral Patel <hiralpat@xxxxxxxxx>
- [PATCH] scsi: remove device when state is changed to deleted thru sysfs
- From: David Milburn <dmilburn@xxxxxxxxxx>
- Re: [PATCH 04/12] [SCSI] qla2xxx: Use standard PCIe Capability Link register field names
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- [GIT PULL] exofs: 3 changes to exofs & osd
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [PATCH v3 0/2] add per-device sysfs knob to enable unrestricted, unprivileged SG_IO
- From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
- Re: [PATCH v2] libfcoe: Save some memory and optimize name lookups
- From: Neil Horman <nhorman@xxxxxxxxxxxxx>
- [scsi:for-next 23/27] drivers/scsi/fnic/fnic_scsi.c:183:35: sparse: invalid assignment: &=
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- [scsi:for-next 23/27] drivers/scsi/fnic/fnic_scsi.c:1260 fnic_rport_exch_reset() error: we previously assumed 'sc->device' could be null (see line 1237)
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH -next] [SCSI] mpt3sas: remove unused variables
- From: Bjørn Mork <bjorn@xxxxxxx>
- [scsi:for-next 12/27] drivers/scsi/ipr.c:6568 ipr_qc_issue() warn: inconsistent returns spin_lock:&ipr_cmd->hrrq->_lock: locked (6562) unlocked (6499,6507,6568)
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] [SCSI] mpt2sas: fix for driver fails EEH recovery from injected pci bus error
- From: Tomas Henzl <thenzl@xxxxxxxxxx>
- [scsi:for-next 14/27] drivers/scsi/qla2xxx/qla_os.c:364 qla2x00_free_req_que() info: redundant null check on req->outstanding_cmds calling kfree()
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [PATCH -next] [SCSI] mpt3sas: remove unused variables
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 05/10] fnic: fnic driver may hit BUG_ON on device reset
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [scsi:for-next 11/19] drivers/scsi/ipr.c:8700:16: warning: array subscript is above array bounds
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- [PATCH] [SCSI] mpt2sas: fix for driver fails EEH recovery from injected pci bus error
- From: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxx>
- Re: [PATCH 2/5] arcmsr: Support Hibernation
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/7] ipr: Implement block iopoll
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [RESEND2 PATCH] libiscsi: avoid unnecessary multiple NULL assignments
- From: Masatake YAMATO <yamato@xxxxxxxxxx>
- Re: Bug#666108: megaraid_sas: which patches are needed for 2.6.32.y?
- From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
- Re: [PATCH 00/16] libfc, libfcoe and fcoe updates for 3.8
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- Re: [PATCH 05/16] libfcoe, fcoe, bnx2fc: Add new fcoe control interface
- From: "Bhanu Prakash Gollapudi" <bprakash@xxxxxxxxxxxx>
- Re: [GIT PULL] target updates for v3.8-rc1
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [GIT PULL] target updates for v3.8-rc1
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: SCSI mid layer and high IOPS capable devices
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: Deadlock observed in SCSI device removal
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [Suggestion] drivers/target/sbp/ : set tport->tpg to NULL when clean up for failure.
- From: Chen Gang <gang.chen@xxxxxxxxxxx>
- Re: [Suggestion] drivers/target/sbp/ : set tport->tpg to NULL when clean up for failure.
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [GIT PULL] target updates for v3.8-rc1
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- FCoE Updates for 3.8 (v2)
- From: Robert Love <robert.w.love@xxxxxxxxx>
- Re: FCoE Updates for 3.8
- From: "Love, Robert W" <robert.w.love@xxxxxxxxx>
- [PATCH v2] libfcoe: Save some memory and optimize name lookups
- From: Robert Love <robert.w.love@xxxxxxxxx>
- Re: SCSI mid layer and high IOPS capable devices
- From: scameron@xxxxxxxxxxxxxxxxxx
- Re: SCSI mid layer and high IOPS capable devices
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: SCSI mid layer and high IOPS capable devices
- From: scameron@xxxxxxxxxxxxxxxxxx
- Re: [PATCH 03/16] libfcoe: Save some memory and optimize name lookups
- From: "Love, Robert W" <robert.w.love@xxxxxxxxx>
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]
