Enabling uart 3 in arndale

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

We are trying to enable the UART3 on COM18 pins of arndale board. The UART3 RXD and TXD are on pins 2 and 4 which as per the base board specification is connected as 

XuRXD3 : UART_3_RXD/GPA1[4] : 2
XuTXD3 : UART_3_TXD/GPA1[5] : 4

As per the public reference manual of exynos 5250, there is a register GPACON (0x1140_0000) 
Setting GPACON |= 0x0010_0000 should enable the pins, but I am not able to see any output on UART3.

Can you please suggest what is the right procedure

-Regards
armdev team @FTM--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux