Re: [PATCH v6 03/10] Documentation: devicetree: Update Samsung FIMC DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sylwester,

Thank you for the patch.

On Thursday 06 March 2014 17:20:12 Sylwester Nawrocki wrote:
> This patch documents following updates of the Exynos4 SoC camera subsystem
> devicetree binding:
> 
>  - addition of #clock-cells property to 'camera' node - the #clock-cells
>    property is needed when the sensor sub-devices use clock provided by
>    the camera host interface,
>  - addition of an optional clock-output-names property,
>  - change of the clock-frequency at image sensor node from mandatory to
>    an optional property - the sensor devices can now control their clock
>    themselves and there should be no need to require this property by the
>    camera host device binding, a default frequency value can often be used.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> Changes since v5:
>  - none.
> 
> Changes since v4:
>  - dropped a requirement of specific order of values in clocks/
>    clock-names properties (Mark) and reference to clock-names in
>    clock-output-names property description (Mark).
> ---
>  .../devicetree/bindings/media/samsung-fimc.txt     |   34 ++++++++++++-----
>  1 file changed, 26 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt
> b/Documentation/devicetree/bindings/media/samsung-fimc.txt index
> 96312f6..dbd4020 100644
> --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
> +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
> @@ -32,6 +32,21 @@ way around.
> 
>  The 'camera' node must include at least one 'fimc' child node.
> 
> +Optional properties:
> +
> +- #clock-cells: from the common clock bindings
> (../clock/clock-bindings.txt),
> +  must be 1. A clock provider is associated with the 'camera' node and it
> should
> +  be referenced by external sensors that use clocks provided by the SoC on
> +  CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
> +  The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
> +
> +- clock-output-names: from the common clock bindings, should contain names
> of
> +  clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
> +  CAM_B_CLKOUT output clocks respectively.

Wouldn't it be better to document the "cam_mclk_a" and "cam_mclk_b" names 
explicitly ? Or do you expect different names to be used in different DT files 
? And as they correspond to the CAM_A_CLKOUT and CAM_B_CLKOUT pins, shouldn't 
they be named "cam_a_clkout" and "cam_b_clkout" ?

> +
> +Note: #clock-cells and clock-output-names are mandatory properties if
> external
> +image sensor devices reference 'camera' device node as a clock provider.
> +

What's the reason not to make them always mandatory ? Backward compatibility 
only ? If so wouldn't it make sense to document the properties as mandatory 
from now on, and treating them as optional in the driver for backward 
compatibility ?

>  'fimc' device nodes
>  -------------------
> 
> @@ -97,8 +112,8 @@ Image sensor nodes
>  The sensor device nodes should be added to their control bus controller
> (e.g. I2C0) nodes and linked to a port node in the csis or the
> parallel-ports node, using the common video interfaces bindings, defined in
> video-interfaces.txt.
> -The implementation of this bindings requires clock-frequency property to be
> -present in the sensor device nodes.
> +An optional clock-frequency property needs to be present in the sensor
> device
> +nodes. Default value when this property is not present is 24 MHz.

This bothers me. Having the FIMC driver read the clock-frequence property from 
the sensor DT nodes feels like a layering violation. Shouldn't the sensor 
drivers call clk_set_rate() explicitly instead ?

>  Example:
> 
> @@ -114,7 +129,7 @@ Example:
>  			vddio-supply = <...>;
> 
>  			clock-frequency = <24000000>;
> -			clocks = <...>;
> +			clocks = <&camera 1>;
>  			clock-names = "mclk";
> 
>  			port {
> @@ -135,7 +150,7 @@ Example:
>  			vddio-supply = <...>;
> 
>  			clock-frequency = <24000000>;
> -			clocks = <...>;
> +			clocks = <&camera 0>;
>  			clock-names = "mclk";
> 
>  			port {
> @@ -149,12 +164,15 @@ Example:
> 
>  	camera {
>  		compatible = "samsung,fimc", "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		status = "okay";
> -
> +		clocks = <&clock 132>, <&clock 133>;
> +		clock-names = "sclk_cam0", "sclk_cam1";

The documentation mentions that clock-names must contain "sclk_cam0", 
"sclk_cam1", "pxl_async0", "pxl_async1". Are the last two optional ? If so I 
think you should clarify the description of the clock-names property. This can 
be done in a separate patch.

> +		#clock-cells = <1>;
> +		clock-output-names = "cam_mclk_a", "cam_mclk_b";
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&cam_port_a_clk_active>;
> +		status = "okay";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> 
>  		/* parallel camera ports */
>  		parallel-ports {

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux