Google
  Web www.spinics.net

Re: [PATCH 5/5] mmc: sdhci-s3c: setup pins using pinctrl interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On 3/11/12, Thomas Abraham <thomas.abraham@xxxxxxxxxx> wrote:
> The platform specific callback to setup the sdhci pin mux and pin config
> is removed and the pinctrl subsystem interface is used to setup the
> mux and config.
>
> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-s3c.c |   15 +++++++++++++--
>  1 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index ea0767e..76c1c36 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -22,6 +22,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_gpio.h>
> +#include <linux/pinctrl/consumer.h>
>
>  #include <linux/mmc/host.h>
>
> @@ -50,6 +51,7 @@ struct sdhci_s3c {
>  	struct platform_device	*pdev;
>  	struct resource		*ioarea;
>  	struct s3c_sdhci_platdata *pdata;
> +	struct pinctrl 		*pinctrl;
>  	unsigned int		cur_clk;
>  	int			ext_cd_irq;
>  	int			ext_cd_gpio;
> @@ -529,6 +531,9 @@ static inline struct sdhci_s3c_drv_data
> *sdhci_s3c_get_driver_data(
>  			platform_get_device_id(pdev)->driver_data;
>  }
>
> +#include <plat/map-s5p.h>
> +#include <plat/map-base.h>

Why this header files are required?
> +
>  static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
>  {
>  	struct s3c_sdhci_platdata *pdata;
> @@ -538,6 +543,7 @@ static int __devinit sdhci_s3c_probe(struct
> platform_device *pdev)
>  	struct sdhci_s3c *sc;
>  	struct resource *res;
>  	int ret, irq, ptr, clks;
> +	char *pstate;
>
>  	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
>  		dev_err(dev, "no device data specified\n");
> @@ -643,8 +649,13 @@ static int __devinit sdhci_s3c_probe(struct
> platform_device *pdev)
>  	}
>
>  	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
> -	if (pdata->cfg_gpio)
> -		pdata->cfg_gpio(pdev, pdata->max_width);
> +	pstate = pdata->max_width ? "sdhci-pcfg8" : "sdhci-pcfg4";
You should check pdata->max_width == 8 instead of max_width itself.
BTW if platform set the amx_width as 1. How do you handle this?

Thank you,
Kyungmin Park
> +	sc->pinctrl = pinctrl_get_select(&pdev->dev, pstate);
> +	if (IS_ERR(sc->pinctrl)) {
> +		dev_err(dev, "failed to setup pin configuration\n");
> +		ret = -ENXIO;
> +		goto err_req_regs;
> +	}
>
>  	host->hw_name = "samsung-hsmmc";
>  	host->ops = &sdhci_s3c_ops;
> --
> 1.6.6.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Home]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Video Projectors]     [PDAs]     [Free Online Dating]     [Hacking TiVo]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Devices]     [Big List of Linux Books]     [16.7MP]

Add to Google Powered by Linux