On Fri, 1 Jun 2012, Steven Rostedt wrote:
> > > Why do you want to skip the wakeup setting in that case?
> >
> > Because that's what the 151b61284776 commit did. Also, the quirk marks
> > the controller as not wakeup-capable.
> >
> > Still, it's worth testing. Andrey and Steve, here's an updated patch
> > which should leave wakeup enabled on your EHCI controllers. If you
> > don't have a USB keyboard handy for generating a wakeup signal, you
> > can test the wakeup functionality by doing:
> >
> > echo enabled >/sys/bus/usb/devices/usb1/power/wakeup
> > echo enabled >/sys/bus/usb/devices/usb2/power/wakeup
> >
> > before suspending. (In fact you need only one of those two lines, but
> > at the moment I forget which -- probably the usb2 one.) Then while
> > the system is asleep, either plugging or unplugging a USB device
> > directly into the computer should cause it to wake up.
>
> I applied the patch, it suspends and resumes fine, but still no wakeup.
>
> I even plugged in a USB keyboard, suspended, and tried to wake it up
> with that. That did not work. I even enabled what you stated above, with
> no effect (with keyboard or usb storage).
This suggests that the original version of the patch is superior.
There's not point in saying the controller is wakeup-capable and trying
to enable wakeup if it's not going to work.
Alan Stern
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
[Netdev]
[Ethernet Bridging]
[Linux Wireless]
[CPU Freq]
[Kernel Newbies]
[Fedora Kernel]
[Security]
[Linux for Hams]
[Netfilter]
[Bugtraq]
[Photo]
[Yosemite]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux RAID]
[Linux Admin]
[Samba]
[Video 4 Linux]
[Linux Resources]
[Free Dating]
[Archives]