Re: [lm-sensors] [RFC PATCH 2/3] thermal: exynos4: Register the tmu sensor with the thermal interface layer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Guenter,

The main idea of this work is to leave the current userspace based
notification scheme and add the kernel based cooling scheme on top of
it. Anyway, It is a good idea to move the file hwmon/exynos4_tmu.c as
this creates 2 hwmon entries.
Adding CC: Donggeun Kim to know his opinion.

Thanks,
Amit Daniel

On 4 January 2012 03:55, Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> wrote:
> On Wed, 2011-12-21 at 06:59 -0500, Amit Daniel Kachhap wrote:
>> Export and register information from the hwmon tmu sensor to the samsung
>> exynos kernel thermal framework where different cooling devices and thermal
>> zone are binded. The exported information is based according to the data
>> structure thermal_sensor_conf present in exynos_thermal.h. HWMON sysfs
>> functions are currently left although all of them are present in generic
>> linux thermal layer.
>> Also the platform data structure is modified to pass frequency cooling
>> in percentages for each thermal level.
>>
> Hi Amit,
>
> wouldn't it make more sense to merge the code as necessary from
> hwmon/exynos4_tmu.c into the new thermal/exynos_thermal.c, and drop
> hwmon/exynos4_tmu.c entirely ?
>
> With that, you should get the hwmon entries for free, and we would not
> have to maintain two drivers with overlapping functionality.
>
> Thanks,
> Guenter
>
>> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@xxxxxxxxxx>
>> ---
>>  drivers/hwmon/exynos4_tmu.c               |   34 ++++++++++++++++++++++++++--
>>  include/linux/platform_data/exynos4_tmu.h |    7 ++++++
>>  2 files changed, 38 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c
>> index f2359a0..6912a7f 100644
>> --- a/drivers/hwmon/exynos4_tmu.c
>> +++ b/drivers/hwmon/exynos4_tmu.c
>> @@ -37,6 +37,9 @@
>>  #include <linux/hwmon-sysfs.h>
>>
>>  #include <linux/platform_data/exynos4_tmu.h>
>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>> +#include <linux/exynos_thermal.h>
>> +#endif
>>
>>  #define EXYNOS4_TMU_REG_TRIMINFO     0x0
>>  #define EXYNOS4_TMU_REG_CONTROL              0x20
>> @@ -248,10 +251,13 @@ static void exynos4_tmu_work(struct work_struct *work)
>>
>>       kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE);
>>
>> -     enable_irq(data->irq);
>>
>>       clk_disable(data->clk);
>>       mutex_unlock(&data->lock);
>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>> +     exynos4_report_trigger();
>> +#endif
>> +     enable_irq(data->irq);
>>  }
>>
>>  static irqreturn_t exynos4_tmu_irq(int irq, void *id)
>> @@ -345,6 +351,14 @@ static const struct attribute_group exynos4_tmu_attr_group = {
>>       .attrs = exynos4_tmu_attributes,
>>  };
>>
>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>> +static struct thermal_sensor_conf exynos4_sensor_conf = {
>> +     .name                   = "exynos4-therm",
>> +     .read_temperature       = (int (*)(void *))exynos4_tmu_read,
>> +};
>> +#endif
>> +/*CONFIG_SAMSUNG_THERMAL_INTERFACE*/
>> +
>>  static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
>>  {
>>       struct exynos4_tmu_data *data;
>> @@ -432,9 +446,20 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
>>       }
>>
>>       exynos4_tmu_control(pdev, true);
>> -
>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>> +     (&exynos4_sensor_conf)->private_data = data;
>> +     (&exynos4_sensor_conf)->sensor_data = pdata;
>> +     ret = exynos4_register_thermal(&exynos4_sensor_conf);
>> +     if (ret) {
>> +             dev_err(&pdev->dev, "Failed to register thermal interface\n");
>> +             goto err_hwmon_device;
>> +     }
>> +#endif
>>       return 0;
>> -
>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>> +err_hwmon_device:
>> +     hwmon_device_unregister(data->hwmon_dev);
>> +#endif
>>  err_create_group:
>>       sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
>>  err_clk:
>> @@ -458,6 +483,9 @@ static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
>>
>>       exynos4_tmu_control(pdev, false);
>>
>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>> +     exynos4_unregister_thermal();
>> +#endif
>>       hwmon_device_unregister(data->hwmon_dev);
>>       sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
>>
>> diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h
>> index 39e038c..642c508 100644
>> --- a/include/linux/platform_data/exynos4_tmu.h
>> +++ b/include/linux/platform_data/exynos4_tmu.h
>> @@ -21,6 +21,7 @@
>>
>>  #ifndef _LINUX_EXYNOS4_TMU_H
>>  #define _LINUX_EXYNOS4_TMU_H
>> +#include <linux/cpu_cooling.h>
>>
>>  enum calibration_type {
>>       TYPE_ONE_POINT_TRIMMING,
>> @@ -64,6 +65,9 @@ enum calibration_type {
>>   *   in the positive-TC generator block
>>   *   0 <= reference_voltage <= 31
>>   * @cal_type: calibration type for temperature
>> + * @freq_pctg_table: Table representing frequency reduction percentage.
>> + * @freq_tab_count: Count of the above table as frequency reduction may
>> + *   applicable to only some of the trigger levels.
>>   *
>>   * This structure is required for configuration of exynos4_tmu driver.
>>   */
>> @@ -79,5 +83,8 @@ struct exynos4_tmu_platform_data {
>>       u8 reference_voltage;
>>
>>       enum calibration_type cal_type;
>> +
>> +     struct freq_pctg_table freq_tab[4];
>> +     unsigned int freq_tab_count;
>>  };
>>  #endif /* _LINUX_EXYNOS4_TMU_H */
>
>
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/linux-pm



[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux