Re: [RFC 1/5] PCI: tegra: Overhaul regulator usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/04/2014 08:49 AM, Thierry Reding wrote:
> The current usage of regulators for the Tegra PCIe block is wrong. It
> doesn't accurately reflect the actual supply inputs of the IP block and
> therefore isn't as flexible as it should be. Rectify this by describing
> all possible supply inputs in the device tree binding documentation and
> deprecate the old supply properties.

> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt

> +Power supplies for Tegra30:
...
> +- Optional:
> +  - If port 0 is enabled:
> +    - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
> +    - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
> +  - If at least one of ports 1 and 2 is enabled:
> +    - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
> +    - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.

Did you get confirmation from HW/... that the mapping from pexa/b to
PCIe ports you document above is correct? IIRC the two supplies might be
related to lanes rather than ports?
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux