On 04/06/2012 02:31 PM, Kenji Kaneshige wrote:
> (2012/04/06 11:59), Taku Izumi wrote:
>>
>> This patch introduces the configuration for the base address of
>> the memory mapped configuration space (MMCFG) for hot pluggable PCI
>> hostbridges on x86 and x86_64.
>>
>> The MMCFG for hotplugable host bridges must be described by using
>> ACPI _CBA method. This patch adds implementation for _CBA method
>> on ACPI pci_root driver and MMCFG manipulating functons for x86 and
>> x86_64.
>>
>> Signed-off-by: Taku Izumi<izumi.taku@xxxxxxxxxxxxxx>
>> ---
>> arch/x86/pci/mmconfig-shared.c | 43 +++++++++++++++++++++++++++++++++++------
>> drivers/acpi/pci_root.c | 28 +++++++++++++++++++++++++-
>> drivers/pci/pci.c | 31 +++++++++++++++++++++++++++++
>> include/acpi/acnames.h | 1
>> include/linux/pci.h | 3 ++
>> 5 files changed, 99 insertions(+), 7 deletions(-)
>>
>> Index: linux-next-build/drivers/acpi/pci_root.c
>> ===================================================================
>> --- linux-next-build.orig/drivers/acpi/pci_root.c
>> +++ linux-next-build/drivers/acpi/pci_root.c
>> @@ -451,7 +451,7 @@ EXPORT_SYMBOL(acpi_pci_osc_control_set);
>>
>> static int __devinit acpi_pci_root_add(struct acpi_device *device)
>> {
>> - unsigned long long segment, bus;
>> + unsigned long long segment, bus, base_addr;
>> acpi_status status;
>> int result;
>> struct acpi_pci_root *root;
>> @@ -506,6 +506,28 @@ static int __devinit acpi_pci_root_add(s
>> device->driver_data = root;
>>
>> /*
>> + * Check _CBA for hot pluggable host bridge
>> + */
>> + base_addr = 0;
>> + status = acpi_evaluate_integer(device->handle, METHOD_NAME__CBA, NULL,
>> + &base_addr);
>> + if (ACPI_FAILURE(status)&& status != AE_NOT_FOUND) {
>> + printk(KERN_ERR PREFIX "can't evaluate _CBA\n");
>> + result = -ENODEV;
>> + goto end;
>> + }
>> + if (base_addr) {
>> + if (pci_add_mmcfg_region(root->segment,
>> + root->secondary.start,
>> + root->secondary.end,
>> + base_addr) != 0) {
>> + printk(KERN_ERR PREFIX "can't add MMCFG entry\n");
>> + result = -ENODEV;
>> + goto end;
>> + }
>
> how about
> result = pci_add_mmcfg_region()
> if (result) {
> printk();
> goto end;
> }
> ?
>
>> + }
>> +
>> + /*
>> * All supported architectures that use ACPI have support for
>> * PCI domains, so we indicate this in _OSC support capabilities.
>> */
>> @@ -625,6 +647,8 @@ static int __devinit acpi_pci_root_add(s
>> return 0;
>>
>> end:
>> + if (base_addr)
>> + pci_remove_mmcfg_region(root->segment, root->secondary.start);
>> if (!list_empty(&root->node))
>> list_del(&root->node);
>> kfree(root);
>> @@ -646,6 +670,8 @@ static int acpi_pci_root_remove(struct a
>> device_set_run_wake(root->bus->bridge, false);
>> pci_acpi_remove_bus_pm_notifier(device);
>>
>> + pci_remove_mmcfg_region(root->segment, root->secondary.start);
>> +
>> kfree(root);
>> return 0;
>> }
>> Index: linux-next-build/include/acpi/acnames.h
>> ===================================================================
>> --- linux-next-build.orig/include/acpi/acnames.h
>> +++ linux-next-build/include/acpi/acnames.h
>> @@ -61,6 +61,7 @@
>> #define METHOD_NAME__AEI "_AEI"
>> #define METHOD_NAME__PRW "_PRW"
>> #define METHOD_NAME__SRS "_SRS"
>> +#define METHOD_NAME__CBA "_CBA"
>>
>> /* Method names - these methods must appear at the namespace root */
>>
>> Index: linux-next-build/include/linux/pci.h
>> ===================================================================
>> --- linux-next-build.orig/include/linux/pci.h
>> +++ linux-next-build/include/linux/pci.h
>> @@ -1460,6 +1460,9 @@ void pcibios_disable_device(struct pci_d
>> void pcibios_set_master(struct pci_dev *dev);
>> int pcibios_set_pcie_reset_state(struct pci_dev *dev,
>> enum pcie_reset_state state);
>> +int pci_add_mmcfg_region(int segment, int start,
>> + int end, u64 addr);
>> +void pci_remove_mmcfg_region(int segment, int bus);
>>
>> #ifdef CONFIG_PCI_MMCONFIG
>> extern void __init pci_mmcfg_early_init(void);
>> Index: linux-next-build/arch/x86/pci/mmconfig-shared.c
>> ===================================================================
>> --- linux-next-build.orig/arch/x86/pci/mmconfig-shared.c
>> +++ linux-next-build/arch/x86/pci/mmconfig-shared.c
>> @@ -28,7 +28,7 @@ static int __initdata pci_mmcfg_resource
>>
>> LIST_HEAD(pci_mmcfg_list);
>>
>> -static __init void pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
>> +static __devinit void pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
>> {
>> if (cfg->res.parent)
>> release_resource(&cfg->res);
>> @@ -45,7 +45,7 @@ static __init void free_all_mmcfg(void)
>> pci_mmconfig_remove(cfg);
>> }
>>
>> -static __init void list_add_sorted(struct pci_mmcfg_region *new)
>> +static __devinit void list_add_sorted(struct pci_mmcfg_region *new)
>> {
>> struct pci_mmcfg_region *cfg;
>>
>> @@ -61,8 +61,10 @@ static __init void list_add_sorted(struc
>> list_add_tail(&new->list,&pci_mmcfg_list);
>> }
>>
>> -static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
>> - int end, u64 addr)
>> +static __devinit struct pci_mmcfg_region *pci_mmconfig_add(int segment,
>> + int start,
>> + int end,
>> + u64 addr)
>> {
>> struct pci_mmcfg_region *new;
>> struct resource *res;
>> @@ -108,6 +110,33 @@ struct pci_mmcfg_region *pci_mmconfig_lo
>> return NULL;
>> }
>>
>> +int pci_add_mmcfg_region(int segment, int start, int end, u64 addr)
>> +{
>> + struct pci_mmcfg_region *cfg;
>> +
>> + cfg = pci_mmconfig_add(segment, start, end, addr);
>> + if (!cfg) {
>> + printk(KERN_WARNING PREFIX
>> + "no memory for MMCFG entry\n");
>> + return -ENOMEM;
>> + }
>
> We need to check if the region is valid (if the region is
> reserved in ACPI motherborad resource).
>
>
>> +
>> + insert_resource(&iomem_resource,&cfg->res);
>> +
>> + return 0;
>> +}
>> +
>> +void pci_remove_mmcfg_region(int segment, int bus)
>> +{
>> + struct pci_mmcfg_region *cfg;
>> +
>> + cfg = pci_mmconfig_lookup(segment, bus);
>> + if (!cfg)
>> + return;
>> +
>> + pci_mmconfig_remove(cfg);
>> +}
>> +
>> static const char __init *pci_mmcfg_e7520(void)
>> {
>> u32 win;
>> @@ -357,8 +386,10 @@ static void __init pci_mmcfg_insert_reso
>> {
>> struct pci_mmcfg_region *cfg;
>>
>> - list_for_each_entry(cfg,&pci_mmcfg_list, list)
>> - insert_resource(&iomem_resource,&cfg->res);
>> + list_for_each_entry(cfg,&pci_mmcfg_list, list) {
>
> We need to add lock for manipulating pci_mmcfg_list.
I have worked out a similar patch several weeks ago to address this issue,
use lock to protect the mmconfig list when pci host bridge hotplug happens.
But I can't access my dev machine from home now, and will send it out for
your reference tomorrow.
Thanks!
>
>> + if (!cfg->res.parent)
>
> Why do we need this line?
>
> Regards,
> Kenji Kaneshige
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[Home]
[Linux USB Devel]
[Video for Linux]
[Linux Audio Users]
[Photo]
[Yosemite News]
[Yosemite Photos]
[Free Online Dating]
[Linux Kernel]
[Linux SCSI]
[XFree86]
