RE: IRQ affinity enforced only after first interrupt.

[Yevgeny Petrilin <yevgenyp@xxxxxxxxxxxx>]

> > >
> > > The architecture specific code will determine whether the IRQ could be migrated
> > > in process context. For example, the IRQ_MOVE_PCNTXT flag will be set on x86
> > > systems if interrupt remapping is enabled.
> >
> > Actually I am encountering this issue with x86, and see different
> > behavior with different HW devices (NICs). On same machine I have
> > one device that responds immediately to affinity changes while the
> > other one changes the affinity only after first interrupt.
> 
> That simply depends on the underlying hardware. On certain hardware we
> can change the affinity only in hard interrupt context, that means
> right when a interrupt of that device is delivered.
> 
> On the other devices we can change it right away and the corresponding
> interrupt chips set IRQ_MOVE_PCNTXT to indicate that.
> 
> There is nothing we can do about this. It's dictated by hardware.
> 

Thanks for the explanation,
Which capabilities of the HW show whether IRQ_MOVE_PCNTXT can be set or not?
Is it done by reading configuration from PCI?

Thanks,
Yevgeny
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html