Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/11/2013 10:59 AM, Belisko Marek wrote:
> Hi Tomi,
> 
> On Fri, Oct 11, 2013 at 10:17 AM, Tomi Valkeinen <tomi.valkeinen@xxxxxx> wrote:
>> On 11/10/13 10:42, Dr. H. Nikolaus Schaller wrote:
>>
>>> I am not sure if there is a SPI driver for a McBSP port [1]? And to make that
>>> work (reliably) and tested it might need a lot of work for us. At least I think
>>> such a change (e.g. setting up clock polarity etc.) is not done in some minutes.
>>> And the only feedback we have from the panel is "does not work"/"works". I.e.
>>> if we are not lucky that it works immediately we have no real means to debug.
>>>
>>> IMHO it also gives more flexibility to board designers to choose GPIOs instead
>>> of enforcing some SPI interface by the driver (and encapsulate this arguable
>>> protocol in the driver). Maybe some board has 3 spare GPIOs but neither
>>> McBSPs nor McSPIs available.
>>
>> This has been an interesting thread, I've learnt a lot =).
>>
>> I still think the panel driver should not handle this, but there should
>> be a separate spi bitbang driver for it.
>>
>> I understand you're not enthusiastic going that way, as the current
>> version works for you. However, when using DT, we need to think how to
>> represent the hardware in the device tree data, and it has to be right
>> from the beginning.
>>
>> That's why I won't allow representing this panel as having 4 gpios in
>> the DT data, because that is not correct. The panel has 3 pins. But
>> then, the panel does allow reading, which could be implemented using 4
>> gpios as you have done. This data should be in the spi-bitbang data, and
>> the panel should just use the standard SPI framework.
> I disagree. There are different drivers which pass in platform data
> gpios (encoder-tfp410.c or encoder-tpd12s015.c)
> and those must be covered by DT then. I cannot see problem why to have
> for td028 panel 3 or 4 gpios defined in DT.

The problem is not representing it in the devicetree, but representing it
correctly. This is a SPI slave device, hence it should be presented in the
devicetree as a SPI slave device and not as a platform device with 4 GPIOs.

- Lars

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux