RE: [PATCH v7 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> From: Mark Rutland [mailto:mark.rutland@xxxxxxx]
> > On Fri, Oct 04, 2013 at 08:49:43PM +0100, Pekon Gupta wrote:
> > OMAP NAND driver currently supports multiple flavours of 1-bit Hamming
> > ecc-scheme, like:
> > - OMAP_ECC_HAMMING_CODE_DEFAULT
> > 	1-bit hamming ecc code using software library
> > - OMAP_ECC_HAMMING_CODE_HW
> > 	1-bit hamming ecc-code using GPMC h/w engine
> > - OMAP_ECC_HAMMING_CODE_HW_ROMCODE
> > 	1-bit hamming ecc-code using GPMC h/w engin with ecc-layout
> compatible
> > 	to ROM code.
> >
> > This patch combines above multiple ecc-schemes into single
> implementation:
> > - OMAP_ECC_HAM1_CODE_HW
> > 	1-bit hamming ecc-code using GPMC h/w engine with ROM-code
> compatible
> > 	ecc-layout.
> 
> If I have my NAND formatted with one of the existing ECC schemes (e.g.
> OMAP_ECC_HAMMING_CODE_DEFAULT) will it work with the new
> OMAP_ECC_HAM1_CODE_HW scheme?
> 
> Are they all compatible?
> 
Yes, they all are 1-bit hamming code, the only difference between 
xx_Default and xx_HW was who was doing the ECC calculation.
For xx_DEFAULT: ECC calculation was done on CPU via s/w library
For xx_HW: ECC calculation was done by in-build h/w engine.
So, all HAMMING_xx can be replaced by HAM1_HW.

[snip]

> > @@ -1342,9 +1342,7 @@ static void __maybe_unused
> gpmc_read_timings_dt(struct device_node *np,
> >  #ifdef CONFIG_MTD_NAND
> >
> >  static const char * const nand_ecc_opts[] = {
> > -	[OMAP_ECC_HAMMING_CODE_DEFAULT]		= "sw",
> > -	[OMAP_ECC_HAMMING_CODE_HW]		= "hw",
> > -	[OMAP_ECC_HAMMING_CODE_HW_ROMCODE]	= "hw-
> romcode",
> > +	[OMAP_ECC_HAM1_CODE_HW]			= "ham1",
> >  	[OMAP_ECC_BCH4_CODE_HW]			= "bch4",
> >  	[OMAP_ECC_BCH8_CODE_HW]			= "bch8",
> 
> Won't this break existing dts which have "sw", "hw", or "hw-romcode"?
> 
> Someone may try to use a new kernel with an old dt, and we marked them
> as deprecated, not removed.
> 
HAMMING_xx ECC scheme was used only on legacy platforms, when
BCH8 was not available, I have not seen anyone using this scheme
*from mainline kernel* from quite a long time. So, it's safe to remove them.

This is what was concluded as per below email.
http://lists.infradead.org/pipermail/linux-mtd/2013-September/048876.html

with regards, pekon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux