Re: [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/09/2013 03:00 PM, Koen Kooi wrote:
> 
> Op 9 sep. 2013, om 21:50 heeft Joel Fernandes <joelf@xxxxxx> het volgende geschreven:
> 
>> On 09/09/2013 01:51 PM, Joel Fernandes wrote:
>>> On 09/09/2013 01:43 PM, Koen Kooi wrote:
>>>>
>>>> Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <joelf@xxxxxx> het volgende geschreven:
>>>>
>>>>> On 09/09/2013 10:51 AM, Koen Kooi wrote:
>>>>>>
>>>>>> Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <khilman@xxxxxxxxxx> het volgende geschreven:
>>>>>>
>>>>>>> Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> writes:
>>>>>>>
>>>>>>>> The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
>>>>>>>> so create a common dtsi both can use.
>>>>>>>>
>>>>>>>> IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver
>>>>>>>> after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead
>>>>>>>> of 1.8.
>>>>>>>>
>>>>>>>> MMC support for AM335x still isn't in, so only the LDO change has been added.
>>>>>>>>
>>>>>>>> Cc: stable@xxxxxxxxxxxxxxx
>>>>>>>>
>>>>>>>> Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
>>>>>>>> Tested-by: Tom Rini <trini@xxxxxx>
>>>>>>>> Tested-by: Matt Porter <matt.porter@xxxxxxxxxx>
>>>>>>>
>>>>>>> I guess the subject should've included v5?
>>>>>>
>>>>>> Yes, I blame it on being monday :)
>>>>>
>>>>> The series you're posting will require rebasing on the current MMC DT series
>>>>> that is being discussed last couple of weeks on the mailing list which were
>>>>> waiting until now as DMA support was missing. Now that DMA support is pulled in,
>>>>> it is safe to apply those patches so I will be reposting them shortly.
>>>>>
>>>>> Please hold off any changes until those patches are posted. This will avoid
>>>>> unnecessary conflicts.
>>>>
>>>> Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
>>>>
>>>
>>> That's fair enough, since  Kevin Acked and Benoit is pulling it, I'm fine with
>>> rebasing on top of it and we avoid any merge conflicts.
>>>
>>
>> I noticed - there were still some comments from Felipe on the v4 series of this
>> patch regarding RF cape and HDMI may be breaking it. How are you addressing that?
> 
> Capes will never go into the .dts and HDMI support needs some serious patching before it can get enabled in the DT. And the RF cape isn't being sold since it has no sw support. No need to worry about things in the 3.15/3.16 timeframe. Unless you want this LDO3 fix not to go in ASAP.
> 
> Joel, is there anything relevant *right now* blocking this patch going in? If not, please test it and add your Tested-by: line.
> 

We don't merge things in hurry and focus is to do things the right way.. I just
want to make sure that all possible comments have been addressed.

Otherwise patch looks OK and hope everyone else thinks so too. I am dealing with
some merge conflicts right now with my series on top of this though, but they
should be easy enough to fix up. That's delaying my testing, but otherwise as
such I don't have any objection to this patch (provided the conclusion is that
all comments have been addressed..). Thanks!

Regards,

-Joel

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux