[PATCH v3 2/2] arm/dts: Configure pinmuxs for user leds control on Bone

[AnilKumar Ch <anilkumar@xxxxxx>]

Adds GPIO pinctrl nodes to am3358_pinmux master node to control
user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.

Signed-off-by: AnilKumar Ch <anilkumar@xxxxxx>
---
 arch/arm/boot/dts/am335x-bone.dts |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 8fdf43a..b0c98cd 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -46,3 +46,18 @@
 	regulator-boot-on;
 	regulator-always-on;
 };
+
+&am3358_pinmux {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&userled_pins>;
+
+	userled_pins: pinmux_userled_pins {
+		pinctrl-single,pins = <
+			0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+			0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+			0x5C 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+			0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+		>;
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html