RE: [PATCH 1/4] ARM: OMAP2+: Introduce CONFIG_SOC_HAS_OMAP_DPLL macro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 10, 2012 at 22:36:52, R, Sricharan wrote:
> The DPLL ip was introduced and used in the OMAP3PLUS socs, while
> OMAP2 had the APLL IP. There are some features which are common
> to both ips, and some which are only applicable to DPLL ip's.
> Currently CONFIG_ARCH_OMAP_XXX checks is used to conditionally
> compile the additional features for every applicable SOC. This
> makes it nessecary to add new a check for every new SOC added
> in the future.
> 
> So by introducing a new "SOC_HAS_OMAP_DPLL" config such new #ifdefs
> can be avoided for the future socs and also to cleanup the existing
>  ifdefferies.
> 
> Signed-off-by: R Sricharan <r.sricharan@xxxxxx>
> ---
>  arch/arm/mach-omap2/Kconfig             |    5 +++++
>  arch/arm/mach-omap2/clock.c             |    2 +-
>  arch/arm/plat-omap/include/plat/clock.h |    4 ++--
>  3 files changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 0685dc8..9a8d691 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -27,9 +27,13 @@ config ARCH_OMAP2
>  	select CPU_V6
>  	select MULTI_IRQ_HANDLER
>  
> +config SOC_HAS_OMAP_DPLL
> +	bool
> +
>  config ARCH_OMAP3
>  	bool "TI OMAP3"
>  	depends on ARCH_OMAP2PLUS
> +	select SOC_HAS_OMAP_DPLL
>  	default y
>  	select CPU_V7
>  	select USB_ARCH_HAS_EHCI if USB_SUPPORT
> @@ -42,6 +46,7 @@ config ARCH_OMAP4
>  	bool "TI OMAP4"
>  	default y
>  	depends on ARCH_OMAP2PLUS
> +	select SOC_HAS_OMAP_DPLL
>  	select CACHE_L2X0
>  	select CPU_V7
>  	select ARM_GIC
> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
> index d9f4931..629cd2d 100644
> --- a/arch/arm/mach-omap2/clock.c
> +++ b/arch/arm/mach-omap2/clock.c
> @@ -400,7 +400,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
>  
>  /* OMAP3/4 non-CORE DPLL clkops */
>  
> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
> +#ifdef CONFIG_SOC_HAS_OMAP_DPLL
>  
>  const struct clkops clkops_omap3_noncore_dpll_ops = {
>  	.enable		= omap3_noncore_dpll_enable,
> diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
> index d0ef57c..095bee8 100644
> --- a/arch/arm/plat-omap/include/plat/clock.h
> +++ b/arch/arm/plat-omap/include/plat/clock.h
> @@ -156,7 +156,7 @@ struct dpll_data {
>  	u8			min_divider;
>  	u16			max_divider;
>  	u8			modes;
> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
> +#ifdef CONFIG_SOC_HAS_OMAP_DPLL
>  	void __iomem		*autoidle_reg;
>  	void __iomem		*idlest_reg;
>  	u32			autoidle_mask;
> @@ -167,7 +167,7 @@ struct dpll_data {
>  	u8			auto_recal_bit;
>  	u8			recal_en_bit;
>  	u8			recal_st_bit;
> -#  endif
> +#endif

I had submitted similar patch recently, and Kevin had suggested that
Instead of adding config option, we shoule simply get rid of this ifdef 
completely.

Refer to 
http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg68293.html


Waiting for Paul to conform here.

Thanks,
Vaibhav

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux