Re: [PATCH] omap3_beagle: init uart2 for beagle rev AX/BX only

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

On Tue, Mar 6, 2012 at 3:38 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> * Govindraj.R <govindraj.raja@xxxxxx> [120306 00:34]:
>> From: "Govindraj.R" <govindraj.raja@xxxxxx>
>>
>> All beagle boards rev > AX/BX have external usb hubs connected to ehci
>> interface, external hub/peripheral uses a nreset sequence for which
>> uart2_rx.gpio_147 pin in mux mode4(USB2HS_nRST) is used on all beagle
>> boards expect rev Ax/BX.
>> (Reference to all beagle boards rev schematics:
>> http://beagleboard.org/hardware/design)
>>
>> Initialising uart2 will lead to serial init taking over uart2_rx pin
>> so init uart2_rx pin mux only for Beagle AX/BX rev boards.
>> Dont init uart2 for all other boards allowing usb_ehci functionality.
>>
>> To initialise individual uart port by id utilise and modify the existing
>> available func. omap_serial_board_init.
>>
>> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
>> Cc: Kevin Hilman <khilman@xxxxxx>
>> Cc: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
>> Tested-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>> Tested-by: Robert Nelson <robertcnelson@xxxxxxxxx>
>> Signed-off-by: Govindraj.R <govindraj.raja@xxxxxx>
>
> Can somebody please test this on non-xm beagle too and
> reply with a Tested-by?

Here's an update for my: Tested-by: Robert Nelson <robertcnelson@xxxxxxxxx>

Just tested with one of my Beagle C4's, (and re-verified the new patch
on a xM B) using usb flash drives on the ehci port...

beagle c4:
v3.2.9
Bus 001 Device 002: ID 0457:0151 Silicon Integrated Systems Corp.
Super Flash 1GB / GXT  64MB Flash Drive

v3.3-rc6:
ehci broken

v3.3-rc6 + this patch:
Bus 001 Device 002: ID 0457:0151 Silicon Integrated Systems Corp.
Super Flash 1GB / GXT  64MB Flash Driv

beagle xM B:
v3.2.9
Bus 001 Device 004: ID 1977:0824 T-Logic

v3.3-rc6:
ehci broken

v3.3-rc6 + this patch:
Bus 001 Device 004: ID 1977:0824 T-Logic

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux