Re: [PATCH v2 3/3] ARM: OMAP2+: AM43x: L2 cache support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 09 April 2014 12:33 PM, Russell King - ARM Linux wrote:
> On Tue, Apr 08, 2014 at 11:17:17AM -0400, Santosh Shilimkar wrote:
>> On Tuesday 08 April 2014 10:53 AM, Sekhar Nori wrote:
>>> On Friday 04 April 2014 03:48 PM, Russell King - ARM Linux wrote:
>>>> On Fri, Apr 04, 2014 at 03:40:29PM +0530, Sekhar Nori wrote:
>>>>> diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
>>>>> index f8b8dac..6b2a056 100644
>>>>> --- a/arch/arm/mach-omap2/omap4-common.c
>>>>> +++ b/arch/arm/mach-omap2/omap4-common.c
>>>>> @@ -224,6 +224,14 @@ int __init omap4_l2_cache_init(void)
>>>>>  
>>>>>  	return omap_l2_cache_init(aux_ctrl, 0xc19fffff);
>>>>>  }
>>>>> +
>>>>> +int __init am43xx_l2_cache_init(void)
>>>>> +{
>>>>> +	u32 aux_ctrl = L310_AUX_CTRL_DATA_PREFETCH |
>>>>> +		       L310_AUX_CTRL_INSTR_PREFETCH;
>>>>
>>>> It would be good to documenting the difference between this and OMAP4,
>>>> and why you have chosen different values.
>>>
>>> There are two main differences:
>>>
>>> 1) OMAP4 sets Shared attribute override enable bit. TBH, I think this is
>>> not needed even in OMAP4 with latest kernel, but I am not sure if I can
>>> do this safely without breaking any usecase currently working with OMAP4.
>>>
>> Wrong. Shared bit is mandatory for the OMAP4. Its a SMP system
>> which needs that.
> 
> Errr.  This bit affects the L2 cache behaviour for Normal memory, outer
> non-cacheable accesses - in other words, those performed to memory mapped
> via dma_alloc_coherent() or dma_alloc_writecombine().  It does not affect
> other types of mappings (other access types ignore the sharable attribute).
> 
> When this bit is clear, accesses to such memory are:
> 
> - read: cacheable, no allocate
> - write: write through, no write allocate
> 
> what this means is that if there are no cache lines in the L2 cache
> corresponding with the physical address, then none will be allocated.
> However, if there are cache lines present, then they will be hit,
> read or updated as appropriate.
> 
> This may matter before CMA where we had the memory returned by
> dma_alloc_coherent() and friends mapped as normal, cacheable mappings
> which could be speculatively prefetched, and therefore cache lines
> dragged into the L2 cache for these physical addresses.
> 
> However, now that we're using CMA, this does not apply as we no longer
> have this aliasing mapping.
> 
> So, with CMA enabled, it should be safe not to set this bit.
> 
Agree. That should be safe now.

> However, the shared bit in the page tables must be set for SMP systems.
> Are you sure you're not confusing the shared bit in the page tables
> with the shared override bit in the L2 cache controller?
>
No i didn't confuse with page table bits. But the SMP remark wasn't
relevant which might have indicated that.
 
>>> 2) OMAP4 sets NS lockdown and NS interrupt access control bits. I
>>> searched through the commit history of L2 cache support on OMAP4 but
>>> there is no mention of why this was needed on OMAP4. I am checking
>>> internally on the history behind this.
>>>
>> These have also come from the aligned settings with hardware folks.
> 
> Again, this doesn't have much to do with hardware, it's secure/non-secure
> access rights configuration to the L2 cache controller.
> 
The settings were aligned by hardware team after consulting security
team and those couple of bit settings came from them. The folks
are no longer working for TI so I can't go back and check the reasons.
We just just leave them as is.

Regards,
Santosh

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux