Re: TWL6040 fails to initialize

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

First, thanks for your help.

On 02/26/2014 08:26 AM, Peter Ujfalusi wrote:
> On 02/25/2014 05:41 PM, Florian Vaussard wrote:
>> If the power was not enabled at all, I would be unable to read the
>> revision register, no? And delaying the probe by one millisecond would
>> be of no help in this case IMHO.
> 
> One thing which might cause this is that if the audpwron GPIO is set high
> before the twl6040 module is probing. When I request the GPIO I ask it to be
> set to low. If the line was high before this means we initiate the power off
> sequence.
> Can you try something like this:
> 

I statistically checked that the sleep should be placed after the GPIO
request, so indeed this seems to be the problem, and your explanation is
plausible. Can you send a proper patch?

Now, related to this, I managed to found a part of the datasheet on the
Great Internet. Looking at the "Power-Up Sequence" section, it is written:

- NRESPWRON goes high -> plug detect and GPO are available
- V2V1 goes high -> hook-detect available by I2C programming (sleep mode)
- AUDPWRON goes high && READYINT -> ready to communicate through I2C and PDM

So, although there seems to be some contradictions on when it is
possible to access the I2C, shouldn't we enable the AUDPWRON GPIO
_before_ making any I2C access?

For the twl6040_probe, the following path would seem more correct to me:

1) enable regulators
2) request AUDPWRON
3) twl6040_power(ON) && regcache_cache_only(false)
4) wait for READYINT (or sleep if deterministic)
5) perform all required I2C accesses (read revision, etc.)
6) twl6040_power(OFF) && regcache_cache_only(true)

What do you think?

Thanks,
Florian

> diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
> index 75316fb33448..d2a0bd1539ae 100644
> --- a/drivers/mfd/twl6040.c
> +++ b/drivers/mfd/twl6040.c
> @@ -674,6 +674,9 @@ static int twl6040_probe(struct i2c_client *client,
>                                             GPIOF_OUT_INIT_LOW, "audpwron");
>                 if (ret)
>                         goto gpio_err;
> +
> +               /* power-down sequence latency */
> +               usleep_range(500, 700);
>         }
> 
>         ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux