Re: [PATCH RFC 00/26] Migrate more OMAP DMA code to DMA engine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 02, 2014 at 03:08:36PM +0000, Russell King - ARM Linux wrote:
> The following patch series moves code to setup the DMA hardware and
> service interrupts from the hardware to the DMA engine driver.  This
> reduces the dependency on the legacy DMA implementation.
Didnt the code getting removed from legacy, are there any users still of
the legacy driver in mainline?

--
~Vinod
> 
> This series does not remove the channel allocation/freeing hooks which
> are used to manage the allocation of physical channels - this is the
> next step in the evolution.
> 
> The patches which move the interrupt handling are currently less than
> perfect since they're writing to ENABLE_L0 under a different spinlock,
> and hence RFC only at the moment.
> 
>  arch/arm/mach-omap1/dma.c |  183 +++++--------
>  arch/arm/mach-omap2/dma.c |  183 ++++++--------
>  arch/arm/plat-omap/dma.c  |   17 +-
>  drivers/dma/omap-dma.c    |  653 ++++++++++++++++++++++++++++++++++++++++-----
>  include/linux/omap-dma.h  |   25 ++-
>  5 files changed, 774 insertions(+), 287 deletions(-)
> 
> -- 
> FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
> in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
> Estimate before purchase was "up to 13.2Mbit".

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux