Re: [PATCH v4 1/5] mfd: omap-usb-host: Update DT clock binding information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 08 January 2014 15:57:19 Roger Quadros wrote:
> It is a clock gate defined like so in the DT clock data
> 
> on OMAP4
>         init_60m_fclk: init_60m_fclk {
>                 #clock-cells = <0>;
>                 compatible = "ti,divider-clock";
>                 clocks = <&dpll_usb_m2_ck>;
>                 reg = <0x0104>;
>                 ti,dividers = <1>, <8>;
>         };
> 
> on OMAP5
>         l3init_60m_fclk: l3init_60m_fclk {
>                 #clock-cells = <0>;
>                 compatible = "ti,divider-clock";
>                 clocks = <&dpll_usb_m2_ck>;
>                 reg = <0x0104>;
>                 ti,dividers = <1>, <8>;
>         };
> 
> So you can see that it is the same thing with a different name.

Right, but init_60m_fclk is the name of the clock output of the
divider here, which is /not/ what you should put in the "clock-names"
property of the consumer. The clock input name should reflect what
the clock is used for instead.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux