[PATCH 8/11] hugetlb: update hugetlb documentation for NUMA controls.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[PATCH 8/11] hugetlb:  update hugetlb documentation for NUMA controls

Against:  2.6.31-mmotm-090925-1435

V2:  Add brief description of per node attributes.

V6:  address review comments

V8: + folded in changes for new nr_hugepages_mempolicy sysctl and
       sysfs attribute

V9: + address Randy Dunlap's comments.

This patch updates the kernel huge tlb documentation to describe the
numa memory policy based huge page management.  Additionaly, the patch
includes a fair amount of rework to improve consistency, eliminate
duplication and set the context for documenting the memory policy
interaction.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@xxxxxx>
Acked-by: David Rientjes <rientjes@xxxxxxxxxx>
Acked-by: Mel Gorman <mel@xxxxxxxxx>

 Documentation/vm/hugetlbpage.txt |  267 ++++++++++++++++++++++++++-------------
 1 file changed, 179 insertions(+), 88 deletions(-)

Index: linux-2.6.31-mmotm-090925-1435/Documentation/vm/hugetlbpage.txt
===================================================================
--- linux-2.6.31-mmotm-090925-1435.orig/Documentation/vm/hugetlbpage.txt	2009-10-05 14:00:32.000000000 -0400
+++ linux-2.6.31-mmotm-090925-1435/Documentation/vm/hugetlbpage.txt	2009-10-05 14:01:00.000000000 -0400
@@ -11,23 +11,21 @@ This optimization is more critical now a
 (several GBs) are more readily available.
 
 Users can use the huge page support in Linux kernel by either using the mmap
-system call or standard SYSv shared memory system calls (shmget, shmat).
+system call or standard SYSV shared memory system calls (shmget, shmat).
 
 First the Linux kernel needs to be built with the CONFIG_HUGETLBFS
 (present under "File systems") and CONFIG_HUGETLB_PAGE (selected
 automatically when CONFIG_HUGETLBFS is selected) configuration
 options.
 
-The kernel built with huge page support should show the number of configured
-huge pages in the system by running the "cat /proc/meminfo" command.
+The /proc/meminfo file provides information about the total number of
+persistent hugetlb pages in the kernel's huge page pool.  It also displays
+information about the number of free, reserved and surplus huge pages and the
+default huge page size.  The huge page size is needed for generating the
+proper alignment and size of the arguments to system calls that map huge page
+regions.
 
-/proc/meminfo also provides information about the total number of hugetlb
-pages configured in the kernel.  It also displays information about the
-number of free hugetlb pages at any time.  It also displays information about
-the configured huge page size - this is needed for generating the proper
-alignment and size of the arguments to the above system calls.
-
-The output of "cat /proc/meminfo" will have lines like:
+The output of "cat /proc/meminfo" will include lines like:
 
 .....
 HugePages_Total: vvv
@@ -53,59 +51,63 @@ HugePages_Surp  is short for "surplus,"
 /proc/filesystems should also show a filesystem of type "hugetlbfs" configured
 in the kernel.
 
-/proc/sys/vm/nr_hugepages indicates the current number of configured hugetlb
-pages in the kernel.  Super user can dynamically request more (or free some
-pre-configured) huge pages.
-The allocation (or deallocation) of hugetlb pages is possible only if there are
-enough physically contiguous free pages in system (freeing of huge pages is
-possible only if there are enough hugetlb pages free that can be transferred
-back to regular memory pool).
-
-Pages that are used as hugetlb pages are reserved inside the kernel and cannot
-be used for other purposes.
-
-Once the kernel with Hugetlb page support is built and running, a user can
-use either the mmap system call or shared memory system calls to start using
-the huge pages.  It is required that the system administrator preallocate
-enough memory for huge page purposes.
-
-The administrator can preallocate huge pages on the kernel boot command line by
-specifying the "hugepages=N" parameter, where 'N' = the number of huge pages
-requested.  This is the most reliable method for preallocating huge pages as
-memory has not yet become fragmented.
+/proc/sys/vm/nr_hugepages indicates the current number of "persistent" huge
+pages in the kernel's huge page pool.  "Persistent" huge pages will be
+returned to the huge page pool when freed by a task.  A user with root
+privileges can dynamically allocate more or free some persistent huge pages
+by increasing or decreasing the value of 'nr_hugepages'.
+
+Pages that are used as huge pages are reserved inside the kernel and cannot
+be used for other purposes.  Huge pages cannot be swapped out under
+memory pressure.
+
+Once a number of huge pages have been pre-allocated to the kernel huge page
+pool, a user with appropriate privilege can use either the mmap system call
+or shared memory system calls to use the huge pages.  See the discussion of
+Using Huge Pages, below.
+
+The administrator can allocate persistent huge pages on the kernel boot
+command line by specifying the "hugepages=N" parameter, where 'N' = the
+number of huge pages requested.  This is the most reliable method of
+allocating huge pages as memory has not yet become fragmented.
 
-Some platforms support multiple huge page sizes.  To preallocate huge pages
+Some platforms support multiple huge page sizes.  To allocate huge pages
 of a specific size, one must preceed the huge pages boot command parameters
 with a huge page size selection parameter "hugepagesz=<size>".  <size> must
 be specified in bytes with optional scale suffix [kKmMgG].  The default huge
 page size may be selected with the "default_hugepagesz=<size>" boot parameter.
 
-/proc/sys/vm/nr_hugepages indicates the current number of configured [default
-size] hugetlb pages in the kernel.  Super user can dynamically request more
-(or free some pre-configured) huge pages.
-
-Use the following command to dynamically allocate/deallocate default sized
-huge pages:
+When multiple huge page sizes are supported, /proc/sys/vm/nr_hugepages
+indicates the current number of pre-allocated huge pages of the default size.
+Thus, one can use the following command to dynamically allocate/deallocate
+default sized persistent huge pages:
 
 	echo 20 > /proc/sys/vm/nr_hugepages
 
-This command will try to configure 20 default sized huge pages in the system.
+This command will try to adjust the number of default sized huge pages in the
+huge page pool to 20, allocating or freeing huge pages, as required.
+
 On a NUMA platform, the kernel will attempt to distribute the huge page pool
-over the all on-line nodes.  These huge pages, allocated when nr_hugepages
-is increased, are called "persistent huge pages".
+over all the set of allowed nodes specified by the NUMA memory policy of the
+task that modifies nr_hugepages.  The default for the allowed nodes--when the
+task has default memory policy--is all on-line nodes.  Allowed nodes with
+insufficient available, contiguous memory for a huge page will be silently
+skipped when allocating persistent huge pages.  See the discussion below of
+the interaction of task memory policy, cpusets and per node attributes with
+the allocation and freeing of persistent huge pages.
 
 The success or failure of huge page allocation depends on the amount of
-physically contiguous memory that is preset in system at the time of the
+physically contiguous memory that is present in system at the time of the
 allocation attempt.  If the kernel is unable to allocate huge pages from
 some nodes in a NUMA system, it will attempt to make up the difference by
 allocating extra pages on other nodes with sufficient available contiguous
 memory, if any.
 
-System administrators may want to put this command in one of the local rc init
-files.  This will enable the kernel to request huge pages early in the boot
-process when the possibility of getting physical contiguous pages is still
-very high.  Administrators can verify the number of huge pages actually
-allocated by checking the sysctl or meminfo.  To check the per node
+System administrators may want to put this command in one of the local rc
+init files.  This will enable the kernel to allocate huge pages early in
+the boot process when the possibility of getting physical contiguous pages
+is still very high.  Administrators can verify the number of huge pages
+actually allocated by checking the sysctl or meminfo.  To check the per node
 distribution of huge pages in a NUMA system, use:
 
 	cat /sys/devices/system/node/node*/meminfo | fgrep Huge
@@ -113,45 +115,47 @@ distribution of huge pages in a NUMA sys
 /proc/sys/vm/nr_overcommit_hugepages specifies how large the pool of
 huge pages can grow, if more huge pages than /proc/sys/vm/nr_hugepages are
 requested by applications.  Writing any non-zero value into this file
-indicates that the hugetlb subsystem is allowed to try to obtain "surplus"
-huge pages from the buddy allocator, when the normal pool is exhausted. As
-these surplus huge pages go out of use, they are freed back to the buddy
-allocator.
+indicates that the hugetlb subsystem is allowed to try to obtain that
+number of "surplus" huge pages from the kernel's normal page pool, when the
+persistent huge page pool is exhausted. As these surplus huge pages become
+unused, they are freed back to the kernel's normal page pool.
 
-When increasing the huge page pool size via nr_hugepages, any surplus
+When increasing the huge page pool size via nr_hugepages, any existing surplus
 pages will first be promoted to persistent huge pages.  Then, additional
 huge pages will be allocated, if necessary and if possible, to fulfill
-the new huge page pool size.
+the new persistent huge page pool size.
 
-The administrator may shrink the pool of preallocated huge pages for
+The administrator may shrink the pool of persistent huge pages for
 the default huge page size by setting the nr_hugepages sysctl to a
 smaller value.  The kernel will attempt to balance the freeing of huge pages
-across all on-line nodes.  Any free huge pages on the selected nodes will
-be freed back to the buddy allocator.
-
-Caveat: Shrinking the pool via nr_hugepages such that it becomes less
-than the number of huge pages in use will convert the balance to surplus
-huge pages even if it would exceed the overcommit value.  As long as
-this condition holds, however, no more surplus huge pages will be
-allowed on the system until one of the two sysctls are increased
-sufficiently, or the surplus huge pages go out of use and are freed.
+across all nodes in the memory policy of the task modifying nr_hugepages.
+Any free huge pages on the selected nodes will be freed back to the kernel's
+normal page pool.
+
+Caveat: Shrinking the persistent huge page pool via nr_hugepages such that
+it becomes less than the number of huge pages in use will convert the balance
+of the in-use huge pages to surplus huge pages.  This will occur even if
+the number of surplus pages it would exceed the overcommit value.  As long as
+this condition holds--that is, until nr_hugepages+nr_overcommit_hugepages is
+increased sufficiently, or the surplus huge pages go out of use and are freed--
+no more surplus huge pages will be allowed to be allocated.
 
 With support for multiple huge page pools at run-time available, much of
-the huge page userspace interface has been duplicated in sysfs. The above
-information applies to the default huge page size which will be
-controlled by the /proc interfaces for backwards compatibility. The root
-huge page control directory in sysfs is:
+the huge page userspace interface in /proc/sys/vm has been duplicated in sysfs.
+The /proc interfaces discussed above have been retained for backwards
+compatibility. The root huge page control directory in sysfs is:
 
 	/sys/kernel/mm/hugepages
 
 For each huge page size supported by the running kernel, a subdirectory
-will exist, of the form
+will exist, of the form:
 
 	hugepages-${size}kB
 
 Inside each of these directories, the same set of files will exist:
 
 	nr_hugepages
+	nr_hugepages_mempolicy
 	nr_overcommit_hugepages
 	free_hugepages
 	resv_hugepages
@@ -159,6 +163,101 @@ Inside each of these directories, the sa
 
 which function as described above for the default huge page-sized case.
 
+
+Interaction of Task Memory Policy with Huge Page Allocation/Freeing
+
+Whether huge pages are allocated and freed via the /proc interface or
+the /sysfs interface using the nr_hugepages_mempolicy attribute, the NUMA
+nodes from which huge pages are allocated or freed are controlled by the
+NUMA memory policy of the task that modifies the nr_hugepages_mempolicy
+sysctl or attribute.  When the nr_hugepages attribute is used, mempolicy
+is ignored.
+
+The recommended method to allocate or free huge pages to/from the kernel
+huge page pool, using the nr_hugepages example above, is:
+
+    numactl --interleave <node-list> echo 20 \
+				>/proc/sys/vm/nr_hugepages_mempolicy
+
+or, more succinctly:
+
+    numactl -m <node-list> echo 20 >/proc/sys/vm/nr_hugepages_mempolicy
+
+This will allocate or free abs(20 - nr_hugepages) to or from the nodes
+specified in <node-list>, depending on whether number of persistent huge pages
+is initially less than or greater than 20, respectively.  No huge pages will be
+allocated nor freed on any node not included in the specified <node-list>.
+
+When adjusting the persistent hugepage count via nr_hugepages_mempolicy, any
+memory policy mode--bind, preferred, local or interleave--may be used.  The
+resulting effect on persistent huge page allocation is as follows:
+
+1) Regardless of mempolicy mode [see Documentation/vm/numa_memory_policy.txt],
+   persistent huge pages will be distributed across the node or nodes
+   specified in the mempolicy as if "interleave" had been specified.
+   However, if a node in the policy does not contain sufficient contiguous
+   memory for a huge page, the allocation will not "fallback" to the nearest
+   neighbor node with sufficient contiguous memory.  To do this would cause
+   undesirable imbalance in the distribution of the huge page pool, or
+   possibly, allocation of persistent huge pages on nodes not allowed by
+   the task's memory policy.
+
+2) One or more nodes may be specified with the bind or interleave policy.
+   If more than one node is specified with the preferred policy, only the
+   lowest numeric id will be used.  Local policy will select the node where
+   the task is running at the time the nodes_allowed mask is constructed.
+   For local policy to be deterministic, the task must be bound to a cpu or
+   cpus in a single node.  Otherwise, the task could be migrated to some
+   other node at any time after launch and the resulting node will be
+   indeterminate.  Thus, local policy is not very useful for this purpose.
+   Any of the other mempolicy modes may be used to specify a single node.
+
+3) The nodes allowed mask will be derived from any non-default task mempolicy,
+   whether this policy was set explicitly by the task itself or one of its
+   ancestors, such as numactl.  This means that if the task is invoked from a
+   shell with non-default policy, that policy will be used.  One can specify a
+   node list of "all" with numactl --interleave or --membind [-m] to achieve
+   interleaving over all nodes in the system or cpuset.
+
+4) Any task mempolicy specifed--e.g., using numactl--will be constrained by
+   the resource limits of any cpuset in which the task runs.  Thus, there will
+   be no way for a task with non-default policy running in a cpuset with a
+   subset of the system nodes to allocate huge pages outside the cpuset
+   without first moving to a cpuset that contains all of the desired nodes.
+
+5) Boot-time huge page allocation attempts to distribute the requested number
+   of huge pages over all on-lines nodes.
+
+Per Node Hugepages Attributes
+
+A subset of the contents of the root huge page control directory in sysfs,
+described above, has been replicated under each "node" system device in:
+
+	/sys/devices/system/node/node[0-9]*/hugepages/
+
+Under this directory, the subdirectory for each supported huge page size
+contains the following attribute files:
+
+	nr_hugepages
+	free_hugepages
+	surplus_hugepages
+
+The free_' and surplus_' attribute files are read-only.  They return the number
+of free and surplus [overcommitted] huge pages, respectively, on the parent
+node.
+
+The nr_hugepages attribute returns the total number of huge pages on the
+specified node.  When this attribute is written, the number of persistent huge
+pages on the parent node will be adjusted to the specified value, if sufficient
+resources exist, regardless of the task's mempolicy or cpuset constraints.
+
+Note that the number of overcommit and reserve pages remain global quantities,
+as we don't know until fault time, when the faulting task's mempolicy is
+applied, from which node the huge page allocation will be attempted.
+
+
+Using Huge Pages
+
 If the user applications are going to request huge pages using mmap system
 call, then it is required that system administrator mount a file system of
 type hugetlbfs:
@@ -206,9 +305,11 @@ map_hugetlb.c.
  * requesting huge pages.
  *
  * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages.  That means the addresses starting with 0x800000... will need
- * to be specified.  Specifying a fixed address is not required on ppc64,
- * i386 or x86_64.
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
  *
  * Note: The default shared memory limit is quite low on many kernels,
  * you may need to increase it via:
@@ -237,14 +338,8 @@ map_hugetlb.c.
 
 #define dprintf(x)  printf(x)
 
-/* Only ia64 requires this */
-#ifdef __ia64__
-#define ADDR (void *)(0x8000000000000000UL)
-#define SHMAT_FLAGS (SHM_RND)
-#else
-#define ADDR (void *)(0x0UL)
+#define ADDR (void *)(0x0UL)	/* let kernel choose address */
 #define SHMAT_FLAGS (0)
-#endif
 
 int main(void)
 {
@@ -302,10 +397,12 @@ int main(void)
  * example, the app is requesting memory of size 256MB that is backed by
  * huge pages.
  *
- * For ia64 architecture, Linux kernel reserves Region number 4 for huge pages.
- * That means the addresses starting with 0x800000... will need to be
- * specified.  Specifying a fixed address is not required on ppc64, i386
- * or x86_64.
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
  */
 #include <stdlib.h>
 #include <stdio.h>
@@ -317,14 +414,8 @@ int main(void)
 #define LENGTH (256UL*1024*1024)
 #define PROTECTION (PROT_READ | PROT_WRITE)
 
-/* Only ia64 requires this */
-#ifdef __ia64__
-#define ADDR (void *)(0x8000000000000000UL)
-#define FLAGS (MAP_SHARED | MAP_FIXED)
-#else
-#define ADDR (void *)(0x0UL)
+#define ADDR (void *)(0x0UL)	/* let kernel choose address */
 #define FLAGS (MAP_SHARED)
-#endif
 
 void check_bytes(char *addr)
 {
--
To unsubscribe from this list: send the line "unsubscribe linux-numa" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Kernel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]     [Devices]

  Powered by Linux