Re: not getting command prompt at the console

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

On Thu, Feb 22, 2007 at 03:19:10PM +0530, Rajat Jain wrote:
> Hi All,
> I just finished porting linux kernel 2.6.15 to a MIPS based board. The
> board now boots up beautifully ... and here is the console log:


> Next, I expected to see a command prompt which never comes. At this
> point if I debug, I find the processor executing the idle process.
> I am successfully hable to telnet to the board and fire whatever
> commands I want though. How do I bring the prompt to the serial
> console?

Run a getty on the serial device (I suppose you're using a serial

> My root FS seems OK since the same root FS is working for the same
> board for an ancient kernel (2.4.20)

Could be that the serial driver changed or that you forgot to compile a
driver for the serial device.


They're all fools. Don't worry. Darwin may be slow, but he'll
eventually get them. -- Matthew Lammers in alt.sysadmin.recovery

Attachment: signature.asc
Description: Digital signature

[Site Home]     [Audio]     [Hams]     [Kernel Newbies]     [Memory]     [Security]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite Photos]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linux Resources]     [Fedora Users]

  Powered by Linux