Multipath Static Route

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi2all

I'm trying to setup a failover static route that allow some redundancy in
case one interface is not working ok

I set this with ip route add

172.26.240.4
        nexthop via 172.26.247.248  dev bond1 weight 1
        nexthop via 172.26.31.248  dev bond0 weight 1

And if the first route fails the second gets active, but later if the that
seconde fails and the first is ok, no failback happens

Is this a timing? How does the kernel is doing the route check?

I have this on
 cat /proc/sys/net/ipv4/route/gc_timeout
300

Best Regards
Jose

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux