confusion regarding the CMD19 and CMD21 in eMMC/SD card spec

[Girish K S <girish.shivananjappa@xxxxxxxxxx>]

Dear all,
             The eMMC 4.5 specification mentions that the CMD21 in
class 2 is a SEND_TUNING BLOCK command. where as the SD card
specification
in the given link says CMD19 in class 2 is the SEND_TUNING_BLOCK
http://www.scribd.com/doc/50685191/53/Figure-4-8-Send-Tuning-Block-Command.
Also the implementation in the drivers/mmc/host/sdhci.c uses the CMD19
as the SEND_TUNING_BLOCK.
Can anybody clarify why there is overlapping in this command number.
May be my understand is wrong.

In the MMC spec the CMD19 is BUS_TEST_W in class 0 and CMD21 is
reserved till eMMC 4.41 version.
But in the SD specification (given link) CMD19 is SEND_TUNING_BLOCK
and CMD21 is reserved.

Thanks and regards
Girish K S
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html