Re: [PATCH v2 3/5] [media] exynos-mscl: Add m2m functionality for the M-Scaler driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/19/2013 02:58 PM, Hans Verkuil wrote:
> On 08/19/2013 12:58 PM, Shaik Ameer Basha wrote:
>> This patch adds the memory to memory (m2m) interface functionality
>> for the M-Scaler driver.
> 
> Just one small comment below...
> 
>>
>> Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
>> ---
>>  drivers/media/platform/exynos-mscl/mscl-m2m.c |  763 +++++++++++++++++++++++++
>>  1 file changed, 763 insertions(+)
>>  create mode 100644 drivers/media/platform/exynos-mscl/mscl-m2m.c
>>
>> diff --git a/drivers/media/platform/exynos-mscl/mscl-m2m.c b/drivers/media/platform/exynos-mscl/mscl-m2m.c
>> new file mode 100644
>> index 0000000..fecbb57
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos-mscl/mscl-m2m.c
>> @@ -0,0 +1,763 @@
>> +/*
>> + * Copyright (c) 2013 - 2014 Samsung Electronics Co., Ltd.
>> + *		http://www.samsung.com
>> + *
>> + * Samsung EXYNOS5 SoC series M-Scaler driver
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published
>> + * by the Free Software Foundation, either version 2 of the License,
>> + * or (at your option) any later version.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/slab.h>
>> +
>> +#include <media/v4l2-ioctl.h>
>> +
>> +#include "mscl-core.h"
>> +
>> +static int mscl_m2m_ctx_stop_req(struct mscl_ctx *ctx)
>> +{
>> +	struct mscl_ctx *curr_ctx;
>> +	struct mscl_dev *mscl = ctx->mscl_dev;
>> +	int ret;
>> +
>> +	curr_ctx = v4l2_m2m_get_curr_priv(mscl->m2m.m2m_dev);
>> +	if (!mscl_m2m_pending(mscl) || (curr_ctx != ctx))
>> +		return 0;
>> +
>> +	mscl_ctx_state_lock_set(MSCL_CTX_STOP_REQ, ctx);
>> +	ret = wait_event_timeout(mscl->irq_queue,
>> +			!mscl_ctx_state_is_set(MSCL_CTX_STOP_REQ, ctx),
>> +			MSCL_SHUTDOWN_TIMEOUT);
>> +
>> +	return ret == 0 ? -ETIMEDOUT : ret;
>> +}
>> +
>> +static int mscl_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
>> +{
>> +	struct mscl_ctx *ctx = q->drv_priv;
>> +	int ret;
>> +
>> +	ret = pm_runtime_get_sync(&ctx->mscl_dev->pdev->dev);
>> +
>> +	return ret > 0 ? 0 : ret;
>> +}
>> +
>> +static int mscl_m2m_stop_streaming(struct vb2_queue *q)
>> +{
>> +	struct mscl_ctx *ctx = q->drv_priv;
>> +	int ret;
>> +
>> +	ret = mscl_m2m_ctx_stop_req(ctx);
>> +	if (ret == -ETIMEDOUT)
>> +		mscl_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
>> +
>> +	pm_runtime_put(&ctx->mscl_dev->pdev->dev);
>> +
>> +	return 0;
>> +}
>> +
>> +void mscl_m2m_job_finish(struct mscl_ctx *ctx, int vb_state)
>> +{
>> +	struct vb2_buffer *src_vb, *dst_vb;
>> +
>> +	if (!ctx || !ctx->m2m_ctx)
>> +		return;
>> +
>> +	src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
>> +	dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
>> +
>> +	if (src_vb && dst_vb) {
>> +		v4l2_m2m_buf_done(src_vb, vb_state);
>> +		v4l2_m2m_buf_done(dst_vb, vb_state);
>> +
>> +		v4l2_m2m_job_finish(ctx->mscl_dev->m2m.m2m_dev,
>> +							ctx->m2m_ctx);
>> +	}
>> +}
>> +
>> +
>> +static void mscl_m2m_job_abort(void *priv)
>> +{
>> +	struct mscl_ctx *ctx = priv;
>> +	int ret;
>> +
>> +	ret = mscl_m2m_ctx_stop_req(ctx);
>> +	if (ret == -ETIMEDOUT)
>> +		mscl_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
>> +}
>> +
>> +static int mscl_get_bufs(struct mscl_ctx *ctx)
>> +{
>> +	struct mscl_frame *s_frame, *d_frame;
>> +	struct vb2_buffer *src_vb, *dst_vb;
>> +	int ret;
>> +
>> +	s_frame = &ctx->s_frame;
>> +	d_frame = &ctx->d_frame;
>> +
>> +	src_vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
>> +	ret = mscl_prepare_addr(ctx, src_vb, s_frame, &s_frame->addr);
>> +	if (ret)
>> +		return ret;
>> +
>> +	dst_vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
>> +	ret = mscl_prepare_addr(ctx, dst_vb, d_frame, &d_frame->addr);
>> +	if (ret)
>> +		return ret;
>> +
>> +	dst_vb->v4l2_buf.timestamp = src_vb->v4l2_buf.timestamp;
>> +
>> +	return 0;
>> +}
>> +
>> +static void mscl_m2m_device_run(void *priv)
>> +{
>> +	struct mscl_ctx *ctx = priv;
>> +	struct mscl_dev *mscl;
>> +	unsigned long flags;
>> +	int ret;
>> +	bool is_set = false;
>> +
>> +	if (WARN(!ctx, "null hardware context\n"))
>> +		return;
>> +
>> +	mscl = ctx->mscl_dev;
>> +	spin_lock_irqsave(&mscl->slock, flags);
>> +
>> +	set_bit(ST_M2M_PEND, &mscl->state);
>> +
>> +	/* Reconfigure hardware if the context has changed. */
>> +	if (mscl->m2m.ctx != ctx) {
>> +		dev_dbg(&mscl->pdev->dev,
>> +			"mscl->m2m.ctx = 0x%p, current_ctx = 0x%p",
>> +			mscl->m2m.ctx, ctx);
>> +		ctx->state |= MSCL_PARAMS;
>> +		mscl->m2m.ctx = ctx;
>> +	}
>> +
>> +	is_set = (ctx->state & MSCL_CTX_STOP_REQ) ? 1 : 0;
>> +	ctx->state &= ~MSCL_CTX_STOP_REQ;
>> +	if (is_set) {
>> +		wake_up(&mscl->irq_queue);
>> +		goto put_device;
>> +	}
>> +
>> +	ret = mscl_get_bufs(ctx);
>> +	if (ret) {
>> +		dev_dbg(&mscl->pdev->dev, "Wrong address");
>> +		goto put_device;
>> +	}
>> +
>> +	mscl_hw_address_queue_reset(ctx);
>> +	mscl_set_prefbuf(mscl, &ctx->s_frame);
>> +	mscl_hw_set_input_addr(mscl, &ctx->s_frame.addr);
>> +	mscl_hw_set_output_addr(mscl, &ctx->d_frame.addr);
>> +	mscl_hw_set_csc_coeff(ctx);
>> +
>> +	if (ctx->state & MSCL_PARAMS) {
>> +		mscl_hw_set_irq_mask(mscl, MSCL_INT_FRAME_END, false);
>> +		if (mscl_set_scaler_info(ctx)) {
>> +			dev_dbg(&mscl->pdev->dev, "Scaler setup error");
>> +			goto put_device;
>> +		}
>> +
>> +		mscl_hw_set_in_size(ctx);
>> +		mscl_hw_set_in_image_format(ctx);
>> +
>> +		mscl_hw_set_out_size(ctx);
>> +		mscl_hw_set_out_image_format(ctx);
>> +
>> +		mscl_hw_set_scaler_ratio(ctx);
>> +		mscl_hw_set_rotation(ctx);
>> +	}
>> +
>> +	ctx->state &= ~MSCL_PARAMS;
>> +	mscl_hw_enable_control(mscl, true);
>> +
>> +	spin_unlock_irqrestore(&mscl->slock, flags);
>> +	return;
>> +
>> +put_device:
>> +	ctx->state &= ~MSCL_PARAMS;
>> +	spin_unlock_irqrestore(&mscl->slock, flags);
>> +}
>> +
>> +static int mscl_m2m_queue_setup(struct vb2_queue *vq,
>> +			const struct v4l2_format *fmt,
>> +			unsigned int *num_buffers, unsigned int *num_planes,
>> +			unsigned int sizes[], void *allocators[])
>> +{
>> +	struct mscl_ctx *ctx = vb2_get_drv_priv(vq);
>> +	struct mscl_frame *frame;
>> +	int i;
>> +
>> +	frame = ctx_get_frame(ctx, vq->type);
>> +	if (IS_ERR(frame))
>> +		return PTR_ERR(frame);
>> +
>> +	if (!frame->fmt)
>> +		return -EINVAL;
>> +
>> +	*num_planes = frame->fmt->num_planes;
>> +	for (i = 0; i < frame->fmt->num_planes; i++) {
>> +		sizes[i] = frame->payload[i];
>> +		allocators[i] = ctx->mscl_dev->alloc_ctx;
>> +	}
>> +	return 0;
>> +}
>> +
>> +static int mscl_m2m_buf_prepare(struct vb2_buffer *vb)
>> +{
>> +	struct mscl_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
>> +	struct mscl_frame *frame;
>> +	int i;
>> +
>> +	frame = ctx_get_frame(ctx, vb->vb2_queue->type);
>> +	if (IS_ERR(frame))
>> +		return PTR_ERR(frame);
>> +
>> +	if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) {
>> +		for (i = 0; i < frame->fmt->num_planes; i++)
>> +			vb2_set_plane_payload(vb, i, frame->payload[i]);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void mscl_m2m_buf_queue(struct vb2_buffer *vb)
>> +{
>> +	struct mscl_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
>> +
>> +	dev_dbg(&ctx->mscl_dev->pdev->dev,
>> +		"ctx: %p, ctx->state: 0x%x", ctx, ctx->state);
>> +
>> +	if (ctx->m2m_ctx)
>> +		v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
>> +}
>> +
>> +static struct vb2_ops mscl_m2m_qops = {
>> +	.queue_setup	 = mscl_m2m_queue_setup,
>> +	.buf_prepare	 = mscl_m2m_buf_prepare,
>> +	.buf_queue	 = mscl_m2m_buf_queue,
>> +	.wait_prepare	 = mscl_unlock,
>> +	.wait_finish	 = mscl_lock,
>> +	.stop_streaming	 = mscl_m2m_stop_streaming,
>> +	.start_streaming = mscl_m2m_start_streaming,
>> +};
>> +
>> +static int mscl_m2m_querycap(struct file *file, void *fh,
>> +			   struct v4l2_capability *cap)
>> +{
>> +	struct mscl_ctx *ctx = fh_to_ctx(fh);
>> +	struct mscl_dev *mscl = ctx->mscl_dev;
>> +
>> +	strlcpy(cap->driver, mscl->pdev->name, sizeof(cap->driver));
>> +	strlcpy(cap->card, mscl->pdev->name, sizeof(cap->card));
>> +	strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));

I forgot to mention that the bus_info should be renamed as well to something
like: "platform:exynos-mscl".

Regards,

	Hans

>> +	cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE |
>> +		V4L2_CAP_VIDEO_CAPTURE_MPLANE |	V4L2_CAP_VIDEO_OUTPUT_MPLANE;
> 
> No V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE, it should just be
> V4L2_CAP_VIDEO_M2M_MPLANE.
> 
>> +
>> +	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
>> +
>> +	return 0;
>> +}
>> +
> 
> Regards,
> 
> 	Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux