Re: Using omap3-isp-live example application on beagleboard with DVI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi John, Laurent,

2012/10/10 Enric Balletbò i Serra <eballetbo@xxxxxxxxx>:
> Hi John,
>
> 2012/9/6 John Weber <rjohnweber@xxxxxxxxx>:
>> Hello,
>>
>> My goal is to better understand how to write an application that makes use
>> of the omap3isp and media controller frameworks and v4l2.  I'm attempting to
>> make use of Laurent's omap3-isp-live example application as a starting point
>> and play with the AEC/WB capability.
>>
>> My problem is that when I start the live application, the display turns blue
>> (it seems when the chromakey fill is done), but no video appears on the
>> display.  I do think that I'm getting good (or at least statistics) from the
>> ISP because I can change the view in front of the camera (by putting my hand
>> in front of the lens) and the gain settings change.
>>
>> root@beagleboard:~# live
>>
>> Device /dev/video6 opened: OMAP3 ISP resizer output (media).
>>
>> viewfinder configured for 2011 1024x768
>>
>> AEWB: #win 10x7 start 16x74 size 256x256 inc 30x30
>>
>> Device /dev/video7 opened: omap_vout ().
>>
>> 3 buffers requested.
>>
>> Buffer 0 mapped at address 0x40279000.
>>
>> Buffer 1 mapped at address 0x40402000.
>>
>> Buffer 2 mapped at address 0x4059e000.
>>
>> 3 buffers requested.
>>
>> Buffer 0 valid.
>>
>> Buffer 1 valid.
>>
>> Buffer 2 valid.
>>
>> AE: factor 3.1250 exposure 2000 sensor gain 12
>>
>> AE: factor 1.6018 exposure 2000 sensor gain 19
>>
>> AE: factor 1.1346 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0446 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0448 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0444 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0443 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0445 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0438 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0448 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0461 exposure 2000 sensor gain 21
>>
>> AE: factor 1.0897 exposure 2000 sensor gain 22
>>
>> AE: factor 2.6543 exposure 2000 sensor gain 58       <   Me obstructing the
>> camera FOV using my hand causes the factor and gain to rise
>>
>> AE: factor 1.2345 exposure 2000 sensor gain 71       <
>>
>> AE: factor 1.1631 exposure 2000 sensor gain 82       <
>>
>> AE: factor 0.9797 exposure 2000 sensor gain 80       <
>>
>> AE: factor 0.9709 exposure 2000 sensor gain 77       <
>>
>> frame rate: 6.597745 fps
>>
>> AE: factor 0.9633 exposure 2000 sensor gain 74       <
>>
>> AE: factor 0.6130 exposure 2000 sensor gain 45       <
>>
>> AE: factor 0.9271 exposure 2000 sensor gain 41       <
>>
>> AE: factor 1.0130 exposure 2000 sensor gain 41       <
>>
>> AE: factor 1.0504 exposure 2000 sensor gain 43       <
>>
>> AE: factor 1.0411 exposure 2000 sensor gain 44       <
>>
>> AE: factor 1.0271 exposure 2000 sensor gain 45       <
>>
>> AE: factor 1.0602 exposure 2000 sensor gain 47       <
>>
>> AE: factor 1.1278 exposure 2000 sensor gain 53       <
>>
>> AE: factor 1.1870 exposure 2000 sensor gain 62       <
>>
>> AE: factor 1.1074 exposure 2000 sensor gain 68       <
>>
>> AE: factor 1.0716 exposure 2000 sensor gain 72       <
>>
>> AE: factor 0.4074 exposure 2000 sensor gain 29       <
>>
>> AE: factor 0.8033 exposure 2000 sensor gain 23
>>
>> AE: factor 0.9741 exposure 2000 sensor gain 22
>>
>> AE: factor 1.0115 exposure 2000 sensor gain 22
>>
>>
>> I did have to change the omap_vout driver slightly to increase the buffer
>> size.  I was getting errors in the application attempted to allocate USERPTR
>> buffers for 1024x768 frames:
>>
>> root@beagleboard:~# live
>>
>> Device /dev/video6 opened: OMAP3 ISP resizer output (media).
>>
>> viewfinder configured for 2011 1024x768
>>
>> AEWB: #win 10x7 start 16x74 size 256x256 inc 30x30
>>
>> Device /dev/video7 opened: omap_vout ().
>>
>> 3 buffers requested.
>>
>> Buffer 0 mapped at address 0x40302000.
>>
>> Buffer 1 mapped at address 0x404df000.
>>
>> Buffer 2 mapped at address 0x4066e000.
>>
>> 3 buffers requested.
>>
>> Buffer 0 too small (1572864 bytes required, 1474560 bytes available.)
>>
>> So, I changed drivers/media/video/omap/omap_voutdef.h to increase the buffer
>> size slightly.
>>
>> /* Max Resolution supported by the driver */
>> #define VID_MAX_WIDTH           1280    /* Largest width */
>> #define VID_MAX_HEIGHT          768     /* Largest height */ <-- Was 720
>>
>> I'm pretty sure that wasn't the only way to solve the problem, but it did
>> allow the live application to run without errors.
>>
>> I am using a patched variant of the current Angstrom mainline (3.2.16) with
>> the MT9P031 sensor and a DVI display on Beagleboard-xM and am able to run
>> the following commands and see a live video stream on the display.  I
>> suspect that this indicates that hardware setup works:
>>
>> media-ctl -v -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1], "OMAP3 ISP
>> CCDC":2->"OMAP3 ISP preview":0[1], "OMAP3 ISP preview":1->"OMAP3 ISP
>> resizer":0[1], "OMAP3 ISP resizer":1->"OMAP3 ISP resizer output":0[1]'
>>
>> media-ctl -v -f '"mt9p031 2-0048":0 [SGRBG12 1024x768], "OMAP3 ISP CCDC":2
>> [SGRBG10 1024x768], "OMAP3 ISP preview":1 [UYVY 10006x760], "OMAP3 ISP
>> resizer":1 [UYVY 1024x768]'
>>
>> yavta -f UYVY -s 1024x768 -n 8 --skip 3 --capture=1000 --stdout /dev/video6
>> | mplayer - -demuxer rawvideo -rawvideo w=1024:h=768:format=uyvy -vo fbdev
>>
>> Thanks for any tips or assistance!
>>
>
> I've exactly the same problem. Before try to debug the problem I would
> like to know if you solved the problem. Did you solved ?
>

The first change I made and worked (just luck). I made the following change:

-       vo_enable_colorkey(vo, 0x123456);
+       // vo_enable_colorkey(vo, 0x123456);

And now the live application works like a charm. Seems this function
enables a chromakey and the live application can't paint over the
chromakey. Laurent, just to understand what I did, can you explain
this ? Thanks.

Cheers,
    Enric
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux