Re: [PATCH 7/8] ir-rx51: Remove MPU wakeup latency adjustments

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jean,

On 08/23/12 14:58, Jean Pihet wrote:
> Hi Timo,
> 
> On Wed, Aug 22, 2012 at 9:50 PM, Timo Kokkonen <timo.t.kokkonen@xxxxxx> wrote:
> That is correct. The API to use is the PM QoS API which cpuidle uses
> to determine the next MPU state based on the allowed latency.
> 
>> A more appropriate fix for the problem would be to modify the idle
>> layer so that it does not allow MPU going to too deep sleep modes when
>> it is expected that the timers need to wake up MPU.
> The idle layer already uses the PM QoS framework to decide the next
> MPU state. I think the right solution is to convert from
> omap_pm_set_max_mpu_wakeup_lat to the PM QoS API.
> 
> Cf. http://marc.info/?l=linux-omap&m=133968658305580&w=2 for an
> example of the conversion.
> 

Thanks. It looks like really easy and straightforward conversion.
However, I couldn't find the patch you were referring to from any trees
I could find. So, I take that this API does not really have omap2
support in it yet? I tried git grepping through the source and to me it
appears there is nothing in place yet that actually restricts the MPU
sleep states on omap2 when requested.

Which puzzles me.. The patch you are referring to transfers the omap I2C
from the old omap PM API to the new QOS API is not applied yet in
mainline. The I2C is definitely working with the old API too, I'm just
wondering why I can't make it working with either of the APIs.. Am I
missing something here?

>> Therefore, it makes sense to actually remove this call entirely from
>> the ir-rx51 driver as it is both wrong and does nothing useful at the
>> moment.
>>
>> Signed-off-by: Timo Kokkonen <timo.t.kokkonen@xxxxxx>
> 
> Regards,
> Jean
> 
>> ---
>>  arch/arm/mach-omap2/board-rx51-peripherals.c | 2 --
>>  drivers/media/rc/ir-rx51.c                   | 9 ---------
>>  include/media/ir-rx51.h                      | 2 --
>>  3 files changed, 13 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> index ca07264..e0750cb 100644
>> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
>> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> @@ -34,7 +34,6 @@
>>  #include <plat/gpmc.h>
>>  #include <plat/onenand.h>
>>  #include <plat/gpmc-smc91x.h>
>> -#include <plat/omap-pm.h>
>>
>>  #include <mach/board-rx51.h>
>>
>> @@ -1227,7 +1226,6 @@ static void __init rx51_init_tsc2005(void)
>>
>>  #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
>>  static struct lirc_rx51_platform_data rx51_lirc_data = {
>> -       .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
>>         .pwm_timer = 9, /* Use GPT 9 for CIR */
>>  };
>>
>> diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
>> index 7eed541..ac7d3f0 100644
>> --- a/drivers/media/rc/ir-rx51.c
>> +++ b/drivers/media/rc/ir-rx51.c
>> @@ -267,12 +267,6 @@ static ssize_t lirc_rx51_write(struct file *file, const char *buf,
>>         if (count < WBUF_LEN)
>>                 lirc_rx51->wbuf[count] = -1; /* Insert termination mark */
>>
>> -       /*
>> -        * Adjust latency requirements so the device doesn't go in too
>> -        * deep sleep states
>> -        */
>> -       lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, 50);
>> -
>>         lirc_rx51_on(lirc_rx51);
>>         lirc_rx51->wbuf_index = 1;
>>         pulse_timer_set_timeout(lirc_rx51, lirc_rx51->wbuf[0]);
>> @@ -292,9 +286,6 @@ static ssize_t lirc_rx51_write(struct file *file, const char *buf,
>>          */
>>         lirc_rx51_stop_tx(lirc_rx51);
>>
>> -       /* We can sleep again */
>> -       lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, -1);
>> -
>>         return n;
>>  }
>>
>> diff --git a/include/media/ir-rx51.h b/include/media/ir-rx51.h
>> index 104aa89..57523f2 100644
>> --- a/include/media/ir-rx51.h
>> +++ b/include/media/ir-rx51.h
>> @@ -3,8 +3,6 @@
>>
>>  struct lirc_rx51_platform_data {
>>         int pwm_timer;
>> -
>> -       int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
>>  };
>>
>>  #endif
>> --
>> 1.7.12
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux