Re: [PATCH 7/8] ir-rx51: Remove MPU wakeup latency adjustments

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Timo,

On Wed, Aug 22, 2012 at 9:50 PM, Timo Kokkonen <timo.t.kokkonen@xxxxxx> wrote:
> The ir-rx51 driver calls omap_pm_set_max_mpu_wakeup_lat() in order to
> avoid problems that occur when MPU goes to sleep in the middle of
> sending an IR code. Without such calls it takes ridiculously long for
> the MPU to wake up from a sleep, which distorts the IR signal
> completely.
>
> However, the actual problem is that probably the GP timers are not
> able to wake up the MPU at all. That is, adjusting the latency
> requirements is not the correct way to solve the issue either. The
> reason why this used to work with the original 2.6.28 based N900
> kernel that is shipped with the product is that placing strict latency
> requirements prevents the MPU from going to sleep at all. Furthermore,
> the only PM layer imlementation available at the moment for OMAP3
> doesn't do anything with the latency requirement placed with
> omap_pm_set_max_mpu_wakeup_lat() calls.
That is correct. The API to use is the PM QoS API which cpuidle uses
to determine the next MPU state based on the allowed latency.

> A more appropriate fix for the problem would be to modify the idle
> layer so that it does not allow MPU going to too deep sleep modes when
> it is expected that the timers need to wake up MPU.
The idle layer already uses the PM QoS framework to decide the next
MPU state. I think the right solution is to convert from
omap_pm_set_max_mpu_wakeup_lat to the PM QoS API.

Cf. http://marc.info/?l=linux-omap&m=133968658305580&w=2 for an
example of the conversion.

> Therefore, it makes sense to actually remove this call entirely from
> the ir-rx51 driver as it is both wrong and does nothing useful at the
> moment.
>
> Signed-off-by: Timo Kokkonen <timo.t.kokkonen@xxxxxx>

Regards,
Jean

> ---
>  arch/arm/mach-omap2/board-rx51-peripherals.c | 2 --
>  drivers/media/rc/ir-rx51.c                   | 9 ---------
>  include/media/ir-rx51.h                      | 2 --
>  3 files changed, 13 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
> index ca07264..e0750cb 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -34,7 +34,6 @@
>  #include <plat/gpmc.h>
>  #include <plat/onenand.h>
>  #include <plat/gpmc-smc91x.h>
> -#include <plat/omap-pm.h>
>
>  #include <mach/board-rx51.h>
>
> @@ -1227,7 +1226,6 @@ static void __init rx51_init_tsc2005(void)
>
>  #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
>  static struct lirc_rx51_platform_data rx51_lirc_data = {
> -       .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
>         .pwm_timer = 9, /* Use GPT 9 for CIR */
>  };
>
> diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
> index 7eed541..ac7d3f0 100644
> --- a/drivers/media/rc/ir-rx51.c
> +++ b/drivers/media/rc/ir-rx51.c
> @@ -267,12 +267,6 @@ static ssize_t lirc_rx51_write(struct file *file, const char *buf,
>         if (count < WBUF_LEN)
>                 lirc_rx51->wbuf[count] = -1; /* Insert termination mark */
>
> -       /*
> -        * Adjust latency requirements so the device doesn't go in too
> -        * deep sleep states
> -        */
> -       lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, 50);
> -
>         lirc_rx51_on(lirc_rx51);
>         lirc_rx51->wbuf_index = 1;
>         pulse_timer_set_timeout(lirc_rx51, lirc_rx51->wbuf[0]);
> @@ -292,9 +286,6 @@ static ssize_t lirc_rx51_write(struct file *file, const char *buf,
>          */
>         lirc_rx51_stop_tx(lirc_rx51);
>
> -       /* We can sleep again */
> -       lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, -1);
> -
>         return n;
>  }
>
> diff --git a/include/media/ir-rx51.h b/include/media/ir-rx51.h
> index 104aa89..57523f2 100644
> --- a/include/media/ir-rx51.h
> +++ b/include/media/ir-rx51.h
> @@ -3,8 +3,6 @@
>
>  struct lirc_rx51_platform_data {
>         int pwm_timer;
> -
> -       int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
>  };
>
>  #endif
> --
> 1.7.12
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux