Re: [PATCH v4 4/5] media: gscaler: Add m2m functionality for the G-Scaler driver
- Subject: Re: [PATCH v4 4/5] media: gscaler: Add m2m functionality for the G-Scaler driver
- From: Shaik Ameer Basha <shaik.samsung@xxxxxxxxx>
- Date: Wed, 1 Aug 2012 09:14:24 +0530
- Cc: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>, linux-media@xxxxxxxxxxxxxxx, sungchun.kang@xxxxxxxxxxx, khw0178.kim@xxxxxxxxxxx, mchehab@xxxxxxxxxxxxx, laurent.pinchart@xxxxxxxxxxxxxxxx, sy0816.kang@xxxxxxxxxxx, s.nawrocki@xxxxxxxxxxx, posciak@xxxxxxxxxx, alim.akhtar@xxxxxxxxx, prashanth.g@xxxxxxxxxxx, joshi@xxxxxxxxxxx
- In-reply-to: <201207311418.05012.hverkuil@xs4all.nl>
Hi Hans,
On Tue, Jul 31, 2012 at 5:48 PM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> On Tue 31 July 2012 14:12:32 Shaik Ameer Basha wrote:
>> From: Sungchun Kang <sungchun.kang@xxxxxxxxxxx>
>>
>> This patch adds the memory to memory (m2m) interface functionality
>> for the G-Scaler driver.
>>
>> Signed-off-by: Hynwoong Kim <khw0178.kim@xxxxxxxxxxx>
>> Signed-off-by: Sungchun Kang <sungchun.kang@xxxxxxxxxxx>
>> Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
>> Reviewed-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
>> ---
>> drivers/media/video/exynos-gsc/gsc-m2m.c | 772 ++++++++++++++++++++++++++++++
>> 1 files changed, 772 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/media/video/exynos-gsc/gsc-m2m.c
>>
>> diff --git a/drivers/media/video/exynos-gsc/gsc-m2m.c b/drivers/media/video/exynos-gsc/gsc-m2m.c
>> new file mode 100644
>> index 0000000..d7ecdb8
>> --- /dev/null
>> +++ b/drivers/media/video/exynos-gsc/gsc-m2m.c
>
>
>> +static int gsc_m2m_querycap(struct file *file, void *fh,
>> + struct v4l2_capability *cap)
>> +{
>> + struct gsc_ctx *ctx = fh_to_ctx(fh);
>> + struct gsc_dev *gsc = ctx->gsc_dev;
>> +
>> + strlcpy(cap->driver, gsc->pdev->name, sizeof(cap->driver));
>> + strlcpy(cap->card, gsc->pdev->name, sizeof(cap->card));
>> + strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));
>> + cap->device_caps = V4L2_CAP_STREAMING |
>> + V4L2_CAP_VIDEO_CAPTURE_MPLANE |
>> + V4L2_CAP_VIDEO_OUTPUT_MPLANE;
>
> Yesterday the new V4L2_CAP_M2M_PLANE was added. You should add this
> capability here. It is up to you to decide whether to remove the
> CAPTURE_MPLANE and OUTPUT_MPLANE caps at the same time, or leave them for
> a bit until any applications have had the chance to use the new M2M capability.
>
> Combining the capture and output caps caused problems since apps would misdetect
> this as a normal capture device instead of an M2M device. It's only for a
> transition time that all three caps are allowed.
>
thanks for pointing it out.
I addressed your comment in v5 set.
CAPTURE_MPLANE and OUTPUT_MPLANE will be removed later.
> Regards,
>
> Hans
Regards,
Shaik Ameer Basha
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[Linux Input]
[Video for Linux]
[Mplayer Users]
[Linux USB Devel]
[Linux Audio Users]
[Photos]
[Yosemite Photos]
[Linux Kernel]
[Linux SCSI]
[XFree86]
[Devices]
[Yosemite Backpacking]