[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cinergy T USB XXS (HD): wrong keymap loaded


Watching television works out of the box, but the remote control does
not work by default. The remote uses the NEC protocol as is also noted
on http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_XXS#Cinergy_T_USB_XXS_.28HD.29_.280ccd:00ab.29
However the RC5 protocol is loaded with a wrong keymap. This is the
command that made the remote work:

ir-keytab --sysdev rc1 -w /lib/udev/rc_keymaps/dib0700_nec

lsusb output:
Bus 001 Device 006: ID 0ccd:00ab TerraTec Electronic GmbH

Related discussion:
http://linuxtv.org/irc/v4l/index.php?date=2011-09-08 (user: fgfhdfh)

Note to Terratec support: last month I bought hardware from LiteOn,
Logitech, Spire, Epson, Lexmark, Intel, AMD (ATI), Crucial, MSI,
Seagate and Terratec. All hardware works flawlessly out of the box or
after installation of software from the vendor, except for Terratec.
Inexperienced people will think their Terratec hardware is broken in a
case like this. Can you guys regularly test your hardware and send
reports like this to the linux-media mailing list (if something is
broken)? With the expected growth of Linux-based Android tablets, the
number of inexperienced people that will think Terratec hardware is
broken could only increase (if they want to use a Terratec USB device
to watch television on their tablet).

Mvg, Sander Devrieze.
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Linux Input]     [Video for Linux]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Photos]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Devices]     [Yosemite Backpacking]

Add to Google Powered by Linux