From: Greg Ungerer <gerg@xxxxxxxxxxx>
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.
So modify the ColdFire 5272 UART addressing so that:
. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---
arch/m68k/include/asm/m5272sim.h | 8 ++++----
arch/m68k/platform/5272/config.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 759c2b0..5c71bd4 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -68,8 +68,8 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
-#define MCFUART_BASE1 0x100 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#define MCFUART_BASE0 (MCF_MBAR + 0x100) /* Base address UART0 */
+#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
@@ -101,8 +101,8 @@
#define MCF_IRQ_TIMER2 70 /* Timer 2 */
#define MCF_IRQ_TIMER3 71 /* Timer 3 */
#define MCF_IRQ_TIMER4 72 /* Timer 4 */
-#define MCF_IRQ_UART1 73 /* UART 1 */
-#define MCF_IRQ_UART2 74 /* UART 2 */
+#define MCF_IRQ_UART0 73 /* UART 0 */
+#define MCF_IRQ_UART1 74 /* UART 1 */
#define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */
#define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */
#define MCF_IRQ_USB0 77 /* USB Endpoint 0 */
diff --git a/arch/m68k/platform/5272/config.c b/arch/m68k/platform/5272/config.c
index 65bb582..99b499e 100644
--- a/arch/m68k/platform/5272/config.c
+++ b/arch/m68k/platform/5272/config.c
@@ -32,12 +32,12 @@ unsigned char ledbank = 0xff;
static struct mcf_platform_uart m5272_uart_platform[] = {
{
- .mapbase = MCF_MBAR + MCFUART_BASE1,
- .irq = MCF_IRQ_UART1,
+ .mapbase = MCFUART_BASE0,
+ .irq = MCF_IRQ_UART0,
},
{
- .mapbase = MCF_MBAR + MCFUART_BASE2,
- .irq = MCF_IRQ_UART2,
+ .mapbase = MCFUART_BASE1,
+ .irq = MCF_IRQ_UART1,
},
{ },
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[Video for Linux]
[Photo]
[Yosemite News]
[Yosemite Photos]
[Video Projectors]
[Linux Kernel]
[Linux SCSI]
[XFree86]