[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Google
  Web www.spinics.net

2.6.17-1.2174_FC5: : Disabling IRQ #7 / nobody cared / usb_hcd_irq



Hi,

i'm running FC5 on an Asus A6T-AP005H laptop. My kernel is 2.6.17-1.2174_FC5.
Somewhere at about 10 minutes after i start the system, the USB subsystem dies with the message:

dmesg:
-----------------------------BEGIN--------------------------------------
irq 7: nobody cared (try booting with the "irqpoll" option)

Call Trace: <IRQ> <ffffffff802b3317>{__report_bad_irq+48}
       <ffffffff802b3515>{note_interrupt+433} <ffffffff802b2e2e>{__do_IRQ+189}
       <ffffffff80271506>{do_IRQ+60} <ffffffff8026ff23>{default_idle+0}
       <ffffffff8026302a>{ret_from_intr+0} <EOI> <ffffffff8026ff23>{default_idle+0}
       <ffffffff802678f6>{thread_return+0} <ffffffff8026ff4e>{default_idle+43}
       <ffffffff8024c90d>{cpu_idle+151} <ffffffff80279f14>{start_secondary+1131}
handlers:
[<ffffffff803d36f1>] (usb_hcd_irq+0x0/0x55)
Disabling IRQ #7
------------------------------END---------------------------------------

After that only the usb mouse continues to work. My external USB harddisk and the USB soundcard are not accessible anymore. This behaviour is reproducable after each reboot. 
The only way i found to keep the USB running is reading some file constantly from the external harddrive. However if i stop accessing the partition on the drive, eventually i get the same exception.

In order to boot successfully i boot the kernel with the 'noapic' option, or else i'm getting 'kernel panic' in some point right after the acpi initialization.
I hope someone could help me fix this problem. If needed i'm able to recompile the kernel and test any patches.

Here is the list of the hardware:

lspci:
-----------------------------BEGIN--------------------------------------
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown device 8168 (rev 01)
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 0398 (rev a1)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:01.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
03:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
------------------------------END---------------------------------------

dmesg:
-----------------------------BEGIN--------------------------------------
Bootdata ok (command line is ro root=LABEL=/ noapic )
Linux version 2.6.17-1.2174_FC5 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Tue Aug 8 15:30:44 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
 BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
 BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS)
 BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
DMI present.
ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fbb90
ACPI: RSDT (v001 A M I  OEMRSDT  0x07000604 MSFT 0x00000097) @ 0x000000003ffc0000
ACPI: FADT (v002 A M I  OEMFACP  0x07000604 MSFT 0x00000097) @ 0x000000003ffc0200
ACPI: MADT (v001 A M I  OEMAPIC  0x07000604 MSFT 0x00000097) @ 0x000000003ffc0390
ACPI: MCFG (v001 A M I  OEMMCFG  0x07000604 MSFT 0x00000097) @ 0x000000003ffc0400
ACPI: OEMB (v001 A M I  AMI_OEM  0x07000604 MSFT 0x00000097) @ 0x000000003ffce040
ACPI: DSDT (v001  A0427 A0427000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003ffc0000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003ffc0000
On node 0 totalpages: 256338
  DMA zone: 2385 pages, LIFO batch:0
  DMA32 zone: 253953 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:8 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:8 APIC version 16
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: ASUS     Product ID:  APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Setting APIC routing to physical flat
Processors: 2
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Checking aperture...
CPU 0: aperture @ 1f10000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists
Kernel command line: ro root=LABEL=/ noapic
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 1607.324 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1022420k/1048320k available (2387k kernel code, 25512k reserved, 1700k data, 200k init)
Calibrating delay using timer specific routine.. 3218.77 BogoMIPS (lpj=6437557)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0(2) -> Node 0 -> Core 0
ACPI Error (psloop-0193): Found unknown opcode FD at AML address ffffc20000016003 offset 5B9F, ignoring [20060127]
ACPI Error (psloop-0193): Found unknown opcode FD at AML address ffffc200000160b2 offset 5C4E, ignoring [20060127]
ACPI Error (psloop-0193): Found unknown opcode FD at AML address ffffc20000016003 offset 5B9F, ignoring [20060127]
ACPI Error (psloop-0193): Found unknown opcode FD at AML address ffffc200000160b2 offset 5C4E, ignoring [20060127]
ACPI: setting ELCR to 0200 (from 0ca0)
Using local APIC timer interrupts.
result 12557166
Detected 12.557 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
spurious 8259A interrupt: IRQ7.
Calibrating delay using timer specific routine.. 3221.76 BogoMIPS (lpj=6443526)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1(2) -> Node 0 -> Core 1
AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 462 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=272
checking if image is initramfs... it is
Freeing initrd memory: 1152k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:02:00.0
PCI: Transparent bridge - 0000:00:10.0
PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: Embedded Controller [EC0] (gpe 32) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNEB] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:03.0
  IO window: c000-cfff
  MEM window: dcf00000-dcffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
  IO window: d000-dfff
  MEM window: dd000000-df6fffff
  PREFETCH window: c0000000-cfffffff
PCI: Bus 4, cardbus bridge: 0000:03:01.0
  IO window: 0000e000-0000e0ff
  IO window: 0000e400-0000e4ff
  PREFETCH window: da000000-dbffffff
  MEM window: 50000000-51ffffff
PCI: Bridge: 0000:00:10.0
  IO window: e000-efff
  MEM window: df700000-dfffffff
  PREFETCH window: da000000-dbffffff
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1157298703.200:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key D4AD441F6DB3F282
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:03.0 to 64
pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [TZ00] (63 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 161
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST9100824A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:03:01.0 [1043:1367]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia: parent PCI bridge Memory window: 0xdf700000 - 0xdfffffff
pcmcia: parent PCI bridge Memory window: 0xda000000 - 0xdbffffff
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13 (1075 mV)
powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e (800 mV)
cpu_init done, current fid 0x8, vid 0x11
powernow-k8: ph2 null fid transition 0x8
ACPI wakeup devices:
P0P8 P0P9 RTGB P0PA NSMB USB0 USB2 P0P1  CBC FIRE WLAN HDAC MC97 SLPB
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 200k freed
Write protecting the kernel read-only data: 919k
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
libata version 1.20 loaded.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@xxxxxxxxxx
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input1
audit(1157298707.588:2): enforcing=1 old_enforcing=0 auid=4294967295
security:  3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
security:  58 classes, 43474 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hdc3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1157298707.832:3): policy loaded auid=4294967295
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 11, io mem 0xdcebe000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 7, io mem 0xdcebfc00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth0: Identified chip type is 'RTL8168B/8111B'.
eth0: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:17:31:f3:b6:e5, IRQ 11
eth0: Auto-negotiation Enabled.
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Linked
Link Speed:100Mbps
Duplex mode:Full-Duplex
I/O Base:0xC800(I/O port)
IRQ:11
ieee1394: Initialized config rom entry `ip1394'
sdhci: Secure Digital Host Controller Interface driver, 0.11
sdhci: Copyright(c) Pierre Ossman
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:03:01.2[C] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
mmc0: SDHCI at 0xdf7ff800 irq 5 PIO
usb 2-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[df7ff000-df7ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
usb 2-1: configuration #1 chosen from 1 choice
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-8774  Tue Aug  1 21:42:17 PDT 2006
usb 2-3: new high speed USB device using ehci_hcd and address 3
usb 2-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 2-5: new high speed USB device using ehci_hcd and address 5
usb 2-5: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003607b43]
ohci_hcd 0000:00:0b.0: wakeup
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:10.1 to 64
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver snd-usb-audio
usb 1-4: new low speed USB device using ohci_hcd and address 2
hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
usb 1-4: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4
usb 1-7: new full speed USB device using ohci_hcd and address 3
usb 1-7: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
floppy0: no floppy controllers found
lp: driver loaded but no devices found
  Vendor: SAMSUNG   Model: HD300LD           Rev: 0000
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
sda: Mode Sense: 27 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
sda: Mode Sense: 27 00 00 00
sda: assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
usb-storage: device scan complete
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: AC Adapter [AC0] (on-line)
Asus Laptop ACPI Extras version 0.29
  Error calling BSTS
  A6T model detected, unsupported, trying default values, supply the developers with your DSDT
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hdc3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdc2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hdc1, type vfat), uses genfs_contexts
Adding 2048248k swap on /dev/hdc5.  Priority:-1 extents:1 across:2048248k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4095 buckets, 32760 max) - 304 bytes per conntrack
ndiswrapper version 1.18 loaded (preempt=no,smp=yes)
ndiswrapper (load_pe_images:573): fixing KI_USER_SHARED_DATA address in the driver
ndiswrapper: driver bcmwl5 (Broadcom,02/11/2005, 3.100.64.0) loaded
ACPI: PCI Interrupt 0000:03:03.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ndiswrapper: using irq 11
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:17:31:e4:b2:2f using driver bcmwl5, 14E4:4318.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
ndiswrapper (iw_set_bitrate:502): setting bit rate failed (C00000BB)
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
audit(1157298743.743:4): avc:  denied  { read } for  pid=2341 comm="gpm" name="localtime" dev=hdc3 ino=2807083 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_r:etc_t:s0 tclass=file
audit(1157298743.743:5): avc:  denied  { read } for  pid=2341 comm="gpm" name="localtime" dev=hdc3 ino=2807083 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_r:etc_t:s0 tclass=file
audit(1157298743.743:6): avc:  denied  { read } for  pid=2341 comm="gpm" name="localtime" dev=hdc3 ino=2807083 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_r:etc_t:s0 tclass=file
audit(1157298743.747:7): avc:  denied  { read } for  pid=2341 comm="gpm" name="localtime" dev=hdc3 ino=2807083 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_r:etc_t:s0 tclass=file
audit(1157298743.755:8): avc:  denied  { read } for  pid=2341 comm="gpm" name="localtime" dev=hdc3 ino=2807083 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_r:etc_t:s0 tclass=file
audit(1157298743.755:9): avc:  denied  { read } for  pid=2341 comm="gpm" name="localtime" dev=hdc3 ino=2807083 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_r:etc_t:s0 tclass=file
audit(1157298743.759:10): avc:  denied  { read } for  pid=2341 comm="gpm" name="localtime" dev=hdc3 ino=2807083 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_r:etc_t:s0 tclass=file
eth0: no IPv6 routers present
eth1: no IPv6 routers present
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-0, type ext3), uses xattr
application artsd uses obsolete OSS audio interface
application xmms uses obsolete OSS audio interface
irq 7: nobody cared (try booting with the "irqpoll" option)

Call Trace: <IRQ> <ffffffff802b3317>{__report_bad_irq+48}
       <ffffffff802b3515>{note_interrupt+433} <ffffffff802b2e2e>{__do_IRQ+189}
       <ffffffff80271506>{do_IRQ+60} <ffffffff8026ff23>{default_idle+0}
       <ffffffff8026302a>{ret_from_intr+0} <EOI> <ffffffff8026ff23>{default_idle+0}
       <ffffffff802678f6>{thread_return+0} <ffffffff8026ff4e>{default_idle+43}
       <ffffffff8024c90d>{cpu_idle+151} <ffffffff80279f14>{start_secondary+1131}
handlers:
[<ffffffff803d36f1>] (usb_hcd_irq+0x0/0x55)
Disabling IRQ #7
------------------------------END---------------------------------------

Thank you for your help in advance!

Best regards,
simeon

__________________________________________________________________________
Erweitern Sie FreeMail zu einem noch leistungsstärkeren E-Mail-Postfach!		
Mehr Infos unter http://freemail.web.de/home/landingpad/?mc=021131


-- 
VGER BF report: U 0.5
-
To unsubscribe from this list: send the line "unsubscribe linux-laptop" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Site Home]     [Linux ACPI]     [Kernel Newbies]     [Memory]     [Security]     [Netfilter]     [Bugtraq]     [Rubini]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linux Resources]

Add to Google Powered by Linux