Re: [linux-sunxi] Re: [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 14, 2014 at 11:52 AM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Hi Carlo,

Hi Maxime,

> On Fri, Apr 11, 2014 at 11:38:11AM +0200, Carlo Caione wrote:
>> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>> Signed-off-by: Carlo Caione <carlo@xxxxxxxxxx>
>> ---
>>
>> In all the DTs the min and max microvolt allowed for each regulator are actually
>> the min and max voltage possible for the regulator itself. This is not safe but
>> we do not have the ranges allowed for each board and the original Allwinner
>> driver does exactly this way.
>>
>> AXP20x has the so called Power Path Management (IPS) that can select the proper
>> power supply according to the status of the external power and the Li-battery
>> status. The output of the IPS block is usually a 5V fixed voltage used as
>> input supply for all the other regulators. This fixed voltage is represented
>> in the DT as a fixed voltage regulator in the "regulator" subnode.
>>
>>  arch/arm/boot/dts/sun4i-a10-a1000.dts           | 69 +++++++++++++++++++++++
>>  arch/arm/boot/dts/sun4i-a10-cubieboard.dts      | 69 +++++++++++++++++++++++
>>  arch/arm/boot/dts/sun4i-a10-hackberry.dts       | 75 +++++++++++++++++++++++++
>>  arch/arm/boot/dts/sun4i-a10-inet97fv2.dts       | 69 +++++++++++++++++++++++
>>  arch/arm/boot/dts/sun4i-a10-mini-xplus.dts      | 75 +++++++++++++++++++++++++
>>  arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts  | 75 +++++++++++++++++++++++++
>>  arch/arm/boot/dts/sun4i-a10-pcduino.dts         | 69 +++++++++++++++++++++++
>>  arch/arm/boot/dts/sun7i-a20-cubieboard2.dts     | 70 +++++++++++++++++++++++
>>  arch/arm/boot/dts/sun7i-a20-cubietruck.dts      | 70 +++++++++++++++++++++++
>>  arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 70 +++++++++++++++++++++++
>
> That looks like a lot of them. Did you test all of them?
> Are all those regulators you define used on all these boards?

I tested it only on cubieboard2, all the other boards are contributed by Hans.
I'll double check with Hans.

>>  10 files changed, 711 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> index fa746aea..029a880 100644
>> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> @@ -88,6 +88,75 @@
>>                       pinctrl-names = "default";
>>                       pinctrl-0 = <&i2c0_pins_a>;
>>                       status = "okay";
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>
> That should be in the DTSI.

Agree.

>> +                     axp209: pmic@34 {
>> +                             compatible = "x-powers,axp209";
>> +                             reg = <0x34>;
>> +                             interrupts = <0>;
>> +
>> +                             interrupt-controller;
>> +                             #interrupt-cells = <1>;
>> +
>> +                             acin-supply = <&axp_ipsout_reg>;
>> +                             vin2-supply = <&axp_ipsout_reg>;
>> +                             vin3-supply = <&axp_ipsout_reg>;
>> +                             ldo24in-supply = <&axp_ipsout_reg>;
>> +                             ldo3in-supply = <&axp_ipsout_reg>;
>> +                             ldo5in-supply = <&axp_ipsout_reg>;
>> +
>> +                             regulators {
>> +                                     compatible = "x-powers,axp20x-reg";
>
> I told you a few times already, but don't introduce pattern-matching
> compatibles.

Probably that compatible will be deleted in the next version using
regulator_bulk_register_supply_alias() as suggested by Mark.

>> +
>> +                                     x-powers,dcdc-freq = <1500>;
>> +
>> +                                     axp_ipsout_reg: axp_ipsout {
>> +                                             compatible = "regulator-fixed";
>> +                                             regulator-name = "axp-ipsout";
>> +                                             regulator-min-microvolt = <5000000>;
>> +                                             regulator-max-microvolt = <5000000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_vcore_reg: dcdc2 {
>> +                                             regulator-min-microvolt = <700000>;
>> +                                             regulator-max-microvolt = <2275000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_ddr_reg: dcdc3 {
>> +                                             regulator-min-microvolt = <700000>;
>> +                                             regulator-max-microvolt = <3500000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_rtc_reg: ldo1 {
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_analog_reg: ldo2 {
>> +                                             regulator-min-microvolt = <1800000>;
>> +                                             regulator-max-microvolt = <3300000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_pll_reg: ldo3 {
>> +                                             regulator-min-microvolt = <700000>;
>> +                                             regulator-max-microvolt = <3500000>;
>> +                                     };
>> +
>> +                                     axp_hdmi_reg: ldo4 {
>> +                                             regulator-min-microvolt = <1250000>;
>> +                                             regulator-max-microvolt = <3300000>;
>> +                                     };
>> +
>> +                                     axp_mic_reg: ldo5 {
>> +                                             regulator-min-microvolt = <1800000>;
>> +                                             regulator-max-microvolt = <3300000>;
>> +                                     };
>> +                             };
>> +                     };
>>               };
>>       };
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
>> index 4684cbe..635fd4b 100644
>> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
>> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
>> @@ -80,6 +80,75 @@
>>                       pinctrl-names = "default";
>>                       pinctrl-0 = <&i2c0_pins_a>;
>>                       status = "okay";
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +
>> +                     axp209: pmic@34 {
>> +                             compatible = "x-powers,axp209";
>> +                             reg = <0x34>;
>> +                             interrupts = <0>;
>> +
>> +                             interrupt-controller;
>> +                             #interrupt-cells = <1>;
>> +
>> +                             acin-supply = <&axp_ipsout_reg>;
>> +                             vin2-supply = <&axp_ipsout_reg>;
>> +                             vin3-supply = <&axp_ipsout_reg>;
>> +                             ldo24in-supply = <&axp_ipsout_reg>;
>> +                             ldo3in-supply = <&axp_ipsout_reg>;
>> +                             ldo5in-supply = <&axp_ipsout_reg>;
>> +
>> +                             regulators {
>> +                                     compatible = "x-powers,axp20x-reg";
>> +
>> +                                     x-powers,dcdc-freq = <1500>;
>> +
>> +                                     axp_ipsout_reg: axp_ipsout {
>> +                                             compatible = "regulator-fixed";
>> +                                             regulator-name = "axp-ipsout";
>> +                                             regulator-min-microvolt = <5000000>;
>> +                                             regulator-max-microvolt = <5000000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_vcore_reg: dcdc2 {
>> +                                             regulator-min-microvolt = <700000>;
>> +                                             regulator-max-microvolt = <2275000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_ddr_reg: dcdc3 {
>> +                                             regulator-min-microvolt = <700000>;
>> +                                             regulator-max-microvolt = <3500000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_rtc_reg: ldo1 {
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_analog_reg: ldo2 {
>> +                                             regulator-min-microvolt = <1800000>;
>> +                                             regulator-max-microvolt = <3300000>;
>> +                                             regulator-always-on;
>> +                                     };
>> +
>> +                                     axp_pll_reg: ldo3 {
>> +                                             regulator-min-microvolt = <700000>;
>> +                                             regulator-max-microvolt = <3500000>;
>> +                                     };
>> +
>> +                                     axp_hdmi_reg: ldo4 {
>> +                                             regulator-min-microvolt = <1250000>;
>> +                                             regulator-max-microvolt = <3300000>;
>> +                                     };
>> +
>> +                                     axp_mic_reg: ldo5 {
>> +                                             regulator-min-microvolt = <1800000>;
>> +                                             regulator-max-microvolt = <3300000>;
>> +                                     };
>> +                             };
>> +                     };
>>               };
>>
>>               i2c1: i2c@01c2b000 {
>> diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
>> index d7c17e4..8f2db9c 100644
>> --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
>> +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
>> @@ -82,6 +82,81 @@
>>                       pinctrl-0 = <&uart0_pins_a>;
>>                       status = "okay";
>>               };
>> +
>> +             i2c0: i2c@01c2ac00 {
>> +                     pinctrl-names = "default";
>> +                     pinctrl-0 = <&i2c0_pins_a>;
>> +                     status = "okay";
>
> That should be in a separate patch.
>
> These comments apply to most of the changes here. Make sure you edit
> all of them.

Ok. Thanks.

-- 
Carlo Caione
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux