Custom Search

Re: [linux-pm] "i8042: Can't reactivate AUX port" after s2ram on 3.4-rc2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


From: Rafael J. Wysocki:

>>  Ok, I tested v4 and also v3, which is in 3.4-rc3. On this laptop both 
> versions
>>  work equally: touchpad works after resume (no help for the card reader
>>  problem, though).
> 
> [...]
> 
>>  Difference from v3:
>>  --- /tmp/v3-uniq        2012-04-16 09:57:42.880521878 +0300
>>  +++ /tmp/v4-uniq        2012-04-16 09:58:03.880545386 +0300
>>  @@ -1019,11 +1018,11 @@
>>         1 Booting Node 0 Processor 1 APIC 0x1
>>         1 CPU1 is up
>>         1 ACPI: Waking up from system sleep state S3
>>  -     11 pcieport 0000:00:02.0: restoring config space at offset 0x1c (was 
> 0x20005151, writing 0x5151)
>>  +      1 pcieport 0000:00:02.0: restoring config space at offset 0x1c (was 
> 0x20005151, writing 0x5151)
> 
> OK, so clearly we need to prevent the writes into the secondary status register
> of the PCIe port from being repreated pointlessly.
> 
> Can you please test the appended patch from completness on top of 3.4-rc3?

I think that's what I did already :)

git pull to 3.4-rc3
(test, result as v3 output/diff in the previous email)
Revert "PCI: Fix regression in pci_restore_state(), v3"
apply v4 of the patch
(test, result as v4 output in the previous email)
git diff v3.4-rc3 -- drivers/pci/pci.c --> matches the patch below


Mikko


> 
> Rafael
> 
> 
> ---
> drivers/pci/pci.c |   18 +++++++++++-------
> 1 file changed, 11 insertions(+), 7 deletions(-)
> 
> Index: linux/drivers/pci/pci.c
> ===================================================================
> --- linux.orig/drivers/pci/pci.c
> +++ linux/drivers/pci/pci.c
> @@ -1015,13 +1015,17 @@ void pci_restore_state(struct pci_dev *d
>     pci_restore_pcie_state(dev);
>     pci_restore_ats_state(dev);
> 
> -    pci_restore_config_space(dev, 10, 15, 0);
> -    /*
> -     * The Base Address register should be programmed before the command
> -     * register(s)
> -     */
> -    pci_restore_config_space(dev, 4, 9, 10);
> -    pci_restore_config_space(dev, 0, 3, 0);
> +    if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
> +        pci_restore_config_space(dev, 10, 15, 0);
> +        /*
> +         * The Base Address register should be programmed before the
> +         * command register(s)
> +         */
> +        pci_restore_config_space(dev, 4, 9, 10);
> +        pci_restore_config_space(dev, 0, 3, 0);
> +    } else {
> +        pci_restore_config_space(dev, 0, 15, 0);
> +    }
> 
>     pci_restore_pcix_state(dev);
>     pci_restore_msi_state(dev);
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux