Re: [v2 4/9] staging:iio:adc:ad7298: Use new triggered buffer setup helper function

[Lars-Peter Clausen <lars@xxxxxxxxxx>]

On 06/08/2012 10:48 AM, Lars-Peter Clausen wrote:
> Use the new triggered buffer setup helper function to allocate and register
> buffer and pollfunc.
> 
> Also as part of the conversion drop scan_timestamp being enabled by default,
> since it is a left over of an earlier cleanup.
> 
> Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
> Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> ---
>  drivers/staging/iio/adc/Kconfig       |    1 +
>  drivers/staging/iio/adc/ad7298.h      |    5 +++
>  drivers/staging/iio/adc/ad7298_core.c |   11 ++----
>  drivers/staging/iio/adc/ad7298_ring.c |   64 ++++++---------------------------
>  4 files changed, 18 insertions(+), 63 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
> index c01df61..bb6fffd 100644
> --- a/drivers/staging/iio/adc/Kconfig
> +++ b/drivers/staging/iio/adc/Kconfig
> @@ -13,6 +13,7 @@ config AD7291
>  config AD7298
>  	tristate "Analog Devices AD7298 ADC driver"
>  	depends on SPI
> +	select IIO_TRIGGERED_BUFFER if IIO_BUFFER
>  	help
>  	  Say yes here to build support for Analog Devices AD7298
>  	  8 Channel ADC with temperature sensor.
> diff --git a/drivers/staging/iio/adc/ad7298.h b/drivers/staging/iio/adc/ad7298.h
> index 5051a7e..18f2787 100644
> --- a/drivers/staging/iio/adc/ad7298.h
> +++ b/drivers/staging/iio/adc/ad7298.h
> @@ -55,6 +55,8 @@ struct ad7298_state {
>  #ifdef CONFIG_IIO_BUFFER
>  int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev);
>  void ad7298_ring_cleanup(struct iio_dev *indio_dev);
> +int ad7298_update_scan_mode(struct iio_dev *indio_dev,
> +	const unsigned long *active_scan_mask);
>  #else /* CONFIG_IIO_BUFFER */
>  
>  static inline int
> @@ -66,5 +68,8 @@ ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
>  static inline void ad7298_ring_cleanup(struct iio_dev *indio_dev)
>  {
>  }
> +
> +#define ad7298_update_scan_mode NULL
> +
>  #endif /* CONFIG_IIO_BUFFER */
>  #endif /* IIO_ADC_AD7298_H_ */
> diff --git a/drivers/staging/iio/adc/ad7298_core.c b/drivers/staging/iio/adc/ad7298_core.c
> index c90f2b3..5e68bad 100644
> --- a/drivers/staging/iio/adc/ad7298_core.c
> +++ b/drivers/staging/iio/adc/ad7298_core.c
> @@ -171,6 +171,7 @@ static int ad7298_read_raw(struct iio_dev *indio_dev,
>  
>  static const struct iio_info ad7298_info = {
>  	.read_raw = &ad7298_read_raw,
> +	.update_scan_mode = ad7298_update_scan_mode,
>  	.driver_module = THIS_MODULE,
>  };
>  
> @@ -231,19 +232,12 @@ static int __devinit ad7298_probe(struct spi_device *spi)
>  	if (ret)
>  		goto error_disable_reg;
>  
> -	ret = iio_buffer_register(indio_dev,
> -				  &ad7298_channels[1], /* skip temp0 */
> -				  ARRAY_SIZE(ad7298_channels) - 1);

Ah, dammit... I guess it's always a good idea to do a final thorough review.

I think we had this discussion before and the reason why iio_buffer_register
take the channels and num_channels because the channels which can be used in
buffered mode maybe a subset of the total channels. But right now these
channels have to be either at the beginning or the end of the channel spec.
I wonder if the following might be a better alternative:

diff --git a/drivers/iio/industrialio-buffer.c
b/drivers/iio/industrialio-buffer.c
index 2f35db9..3d8d187 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -285,6 +285,9 @@ int iio_buffer_register(struct iio_dev *indio_dev,
 	if (channels) {
 		/* new magic */
 		for (i = 0; i < num_channels; i++) {
+			if (channels[i].scan_index < 0)
+				continue;
+
 			/* Establish necessary mask length */
 			if (channels[i].scan_index >
 			    (int)indio_dev->masklength - 1)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html