On 06/11/2012 12:39 AM, Peter Meerwald wrote:
> minimal driver, submitting to staging
>
> Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx>
Just some minor nitpicks inline.
> ---
> [...]
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define VCNL4000_DRV_NAME "vcnl4000"
> +
> +#define VCNL4000_COMMAND 0x80 /* Command register */
> +#define VCNL4000_PROD_REV 0x81 /* Product ID and Revision ID */
> +#define VCNL4000_LED_CURRENT 0x83 /* IR LED current for proximity mode */
> +#define VCNL4000_AL_PARAM 0x84 /* Ambient light parameter register */
> +#define VCNL4000_AL_RESULT_HI 0x85 /* Ambient light result register, MSB */
> +#define VCNL4000_AL_RESULT_LO 0x86 /* Ambient light result register, LSB */
> +#define VCNL4000_PS_RESULT_HI 0x87 /* Proximity result register, MSB */
> +#define VCNL4000_PS_RESULT_LO 0x88 /* Proximity result register, LSB */
> +#define VCNL4000_PS_MEAS_FREQ 0x89 /* Proximity measurement signal frequency */
> +#define VCNL4000_PS_MOD_ADJ 0x8a /* Proximity modulator timing adjustment */
> +
> +/* Bit masks for COMMAND register */
> +#define VCNL4000_ALS_RDY 0x40 /* ALS data ready? */
> +#define VCNL4000_PS_RDY 0x20 /* proximity data ready? */
> +#define VCNL4000_ALS_OD 0x10 /* start on-demand ALS measurement */
> +#define VCNL4000_PS_OD 0x08 /* start on-demand proximity measurement */
> +
> +struct vcnl4000_data {
> + struct i2c_client *client;
> +};
> +
> +static const struct i2c_device_id vcnl4000_id[] = {
> + { "vcnl4000", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, vcnl4000_id);
> +
> +static int vcnl4000_read(struct vcnl4000_data *data, u8 reg, const char *msg)
> +{
> + int ret = i2c_smbus_read_byte_data(data->client, reg);
> + if (ret < 0)
> + dev_err(&data->client->dev,
> + "vcnl4000_read(%s) failed, error %d\n",
> + msg, ret);
> + return ret;
> +}
> +
> +static int vcnl4000_write(struct vcnl4000_data *data,
> + u8 reg, u8 val, const char *msg)
> +{
> + int ret = i2c_smbus_write_byte_data(data->client, reg, val);
> + if (ret < 0)
> + dev_err(&data->client->dev,
> + "vcnl4000_write(%s) failed, error %d\n",
> + msg, ret);
> + return ret;
> +}
> +
> +
> +static int vcnl4000_get_als(struct vcnl4000_data *data, int *val)
> +{
> + u16 buf;
__be16
> + int ret;
> +
> + ret = vcnl4000_write(data, VCNL4000_COMMAND,
> + VCNL4000_ALS_OD, "COMMAND");
> + if (ret < 0)
> + return ret;
> +
> + /* wait for ALS data to become ready */
> + do {
> + ret = vcnl4000_read(data, VCNL4000_COMMAND, "COMMAND");
> + if (ret < 0)
> + return ret;
> + } while (!(ret & VCNL4000_ALS_RDY));
This should have a timeout, so it does not get stuck in a endless loop in
case there is an issue with the hardware.
> +
> + ret = i2c_smbus_read_i2c_block_data(data->client,
> + VCNL4000_AL_RESULT_HI, sizeof(buf), (u8 *) &buf);
> + if (ret < 0) {
> + dev_err(&data->client->dev,
> + "i2c_smbus_read_block_data() failed, error %d\n", ret);
> + return ret;
> + }
> +
> + *val = __be16_to_cpu(buf);
just be16_to_cpu, without the underscores
> +
> + return 0;
> +}
> +
> +static int vcnl4000_get_ps(struct vcnl4000_data *data, int *val)
> +{
> + u16 buf;
> + int ret;
This function has the same structure as the one above, maybe put this in a
common function which takes the OD and RDY bits and the RESULT register as
parameters.
> +
> + ret = vcnl4000_write(data, VCNL4000_COMMAND,
> + VCNL4000_PS_OD, "COMMAND");
> + if (ret < 0)
> + return ret;
> +
> + /* wait for proximity data to become ready */
> + do {
> + ret = vcnl4000_read(data, VCNL4000_COMMAND, "COMMAND");
> + if (ret < 0)
> + return ret;
> + } while (!(ret & VCNL4000_PS_RDY));
> +
> + ret = i2c_smbus_read_i2c_block_data(data->client,
> + VCNL4000_PS_RESULT_HI, sizeof(buf), (u8 *) &buf);
> + if (ret < 0) {
> + dev_err(&data->client->dev,
> + "i2c_smbus_read_block_data() failed, error %d\n", ret);
> + return ret;
> + }
> +
> + *val = __be16_to_cpu(buf);
> +
> + return 0;
> +}
> +
> +static const struct iio_chan_spec vcnl4000_channels[] = {
> + {
> + .type = IIO_INTENSITY,
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
> + }, {
> + .type = IIO_PROXIMITY,
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
> + }, {
> + .type = IIO_LIGHT,
> + .info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
> + }
> +};
> +
> +static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + int ret = -EINVAL;
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + switch (chan->type) {
> + case IIO_INTENSITY:
> + ret = vcnl4000_get_als(data, val);
> + if (ret < 0)
> + return ret;
> + ret = IIO_VAL_INT;
> + break;
> + case IIO_PROXIMITY:
> + ret = vcnl4000_get_ps(data, val);
> + if (ret < 0)
> + return ret;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + break;
> + }
> + break;
> + case IIO_CHAN_INFO_PROCESSED:
> + if (chan->type == IIO_LIGHT) {
> + ret = vcnl4000_get_als(data, val);
> + if (ret < 0)
> + return ret;
> + *val = (*val + 3) / 4;
Does it make sense to do this processing here? Or should it rather return
the raw value and have a scale attribute?
> + ret = IIO_VAL_INT;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct iio_info vcnl4000_info = {
> + .read_raw = vcnl4000_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int __devinit vcnl4000_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct vcnl4000_data *data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = iio_device_alloc(sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + ret = vcnl4000_read(data, VCNL4000_PROD_REV, "PROD_REV");
> + if (ret < 0)
> + goto error_free_dev;
> +
> + dev_info(&client->dev, "VCNL4000 Ambient light/proximity sensor, "
> + "Prod %02x, Rev: %02x\n", ret >> 4, ret & 0xf);
> +
> + ret = vcnl4000_read(data, VCNL4000_LED_CURRENT, "LED_CURRENT");
> + if (ret < 0)
> + goto error_free_dev;
The result of this read is never used.
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->info = &vcnl4000_info;
> + indio_dev->channels = vcnl4000_channels;
> + indio_dev->num_channels = ARRAY_SIZE(vcnl4000_channels);
> + indio_dev->name = VCNL4000_DRV_NAME;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0)
> + goto error_free_dev;
> +
> + return 0;
> +
> +error_free_dev:
> + iio_device_free(indio_dev);
> + return ret;
> +}
> +
> +[...]
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[Linux USB Devel]
[Video for Linux]
[Linux Audio Users]
[Photo]
[Yosemite News]
[Yosemite Photos]
[Free Online Dating]
[Linux Kernel]
[Linux SCSI]
[XFree86]
