[PATCH] ahci_sunxi: Use msleep instead of mdelay

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ahci_sunxi_phy_init is called from the probe and resume code paths, and
sleeping is safe in both, so use msleep instead of mdelay.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/ata/ahci_sunxi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index 001f7dfc..d1bf3f7 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
 
 	/* This magic is from the original code */
 	writel(0, reg_base + AHCI_RWCR);
-	mdelay(5);
+	msleep(5);
 
 	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
 	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
 			 (0x7 << 20), (0x3 << 20));
 	sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
 			 (0x1f << 5), (0x19 << 5));
-	mdelay(5);
+	msleep(5);
 
 	sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
 
@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
 		udelay(1);
 	} while (1);
 
-	mdelay(15);
+	msleep(15);
 
 	writel(0x7, reg_base + AHCI_RWCR);
 
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux