Re: [PATCH v2 2/4] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 20, 2013 at 08:07:45PM +0000, Loc Ho wrote:
> Hi,
> 
> >> +- compatible         : Shall be "apm,xgene-ahci-phy" or
> >> +                       "apm,xgene-ahci-phy2". The "apm,xgene-ahci-phy"
> >> +                       describes an port shared with SGMII Ethernet port.
> >> +                       The "apm,xgene-ahci-phy2" describes an port not
> >> +                       shared with SGMII and the PLL located at another
> >> +                       memory resource region.
> >
> > Is there not a better name available than "apm,xgene-ahci-phy2"?
> [Loc Ho]
> I will name it apm,xgene-ahci-phyx.
> 
> >> +- reg                        : First PHY memory resource
> >> +                       Second separate PHY PLL clock memory resource if
> >> +                       type "apm,xgene-ahci-phy2"
> >
> > Is ths PLL actually part of the PHY, or does it just feed the PHY?
> [Loc Ho]
> This is always the PLL clock macro in each IP. For the 3rd controller,
> we require an extra clock macro and can NOT use the original clock
> macro as it is not mux'ed with the SGMII port.

Ok. Is the reference clock into the PLL always on, or might we need to
describe it?

> 
> >
> >> +- txeyetuning                : Manual control to fine tune the capture of the serial
> >> +                       bit lines from the automatic calibrated position.
> >> +                       Two set of 3-tuple setting for Gen1, Gen2, and Gen3.
> >> +                       Range from 0 to 0x7f. Default is 0xa.
> >
> > If you have a property for which the name consists of multiple words,
> > split the words with '-'.
> >
> > What does this actually mean?
> >
> > What units are these values in?
> >
> > What effect do those values have?
> [Loc Ho]
> Will provide in next version.

Cheers.

> 
> >
> >> +- txeyedirection     : Eye tuning manual control direction. 0 means sample
> >> +                       data earlier than the nominal sampling point. 1 means
> >> +                       sample data later than the nominal sampling point.
> >> +                       Two set of 3-tuple setting for Gen1, Gen2, and Gen3.
> >> +                       Default is 0x0.
> >
> > Likewise, use '-'.
> >
> > s/than/then/ ?
> [Loc Ho]
> I believe that than is appropriate here a we are doing an comparison.

Apologies, you are corerct; I completely misread this.

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux