Re: [RFC][PATCH] libata: enable SATA disk fua detection on default

[Zheng Liu <gnehzuil.liu@xxxxxxxxx>]

On Wed, May 09, 2012 at 07:12:43AM -0400, Christoph Hellwig wrote:
> On Wed, May 09, 2012 at 05:30:16PM +0800, Zheng Liu wrote:
> > IMHO, FUA provides a solution that we can get better performance in write
> > cache mode when we do many flush operations.  If I set the disk to write
> > through mode, I won't get this benefit.  Am I missing something?
> 
> If you set the disk to write through mode you never have to flush the
> cache.  So as soonas your number of flushes gets close to the number of
> writes it tends to be a clear win - for ATA the tradeoff is even more in
> favour of write through because the flush command can't be queued yetin
> commonly available standards versions.  So if you have a workload that
> basically needs to flush out every write you win - if you have workloads
> where you have a lot more writes than cache flushes write back mode
> wins.

Thanks for your explanation.  It seems that there still has a problem.
If I set the disk to write through mode, I need to modify my application
to remove all of flush/sync operations.  It is unacceptable for us.

> > Currently, the key issue is that we disable FUA detection for SATA disk.
> > We almost have no chance to change it because it is too complicated to
> > set libata_fua variable when this module is loaded.  So why not give
> > SATA disk an opportunity to enable this feature?  After all, there is a
> > lot of SATA disks that support this feature.
> 
> I'm all in favour of your patch, I just wanted to point out that the
> argument in the description wasn't quite correct.

Thank you.  I will fix it.  :-)

Regards,
Zheng
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html