Re: Hotplug borked after suspend/resume in Linux-3.3 ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



cwillu wrote:
> On Tue, Apr 17, 2012 at 3:02 PM, Mark Lord <kernel@xxxxxxxxxxxx> wrote:
>> On 12-04-17 04:53 PM, Mark Lord wrote:
>>> On 12-04-17 04:48 PM, Mark Lord wrote:
>>>> On 12-04-17 04:38 PM, Mark Lord wrote:
>>>>> Okay, so why isn't SATA hotplug working in linux-3.3.2 ?
>>>>> I don't know when it stopped working, but it's a blooming pain in the sysadmin.
>>>>>
>>>>> I need to hotplug a SATA drive into an AHCI port,
>>>>> preferably without having to reboot first.
>>>>>
>>>>> Is there a patch available already for this regression?
>>>>
>>>>
>>>> Answering my own question, this patch appears to address the issue.
>>>> I'll test and report back again shortly:
>>>>
>>>>     http://patchwork.ozlabs.org/patch/146326/
>>>>
>>>> Odd that it's been sitting in various people's inboxes since 3.3-rc1
>>>> and hasn't been pushed out yet.
>>>
>>> Ahh.. perhaps because it doesn't fix the problem I'm seeing here.
>>>
>>> Oh well, anyone else got a fix for this regression yet?
>>> Even doing a rescan-scsi-bus doesn't work on the closed down ports.
>>>
>>> Basically, any unoccupied AHCI port is dead to the world
>>> after a simple suspend/resume (RAM) cycle.  On one of my machines
>>> I can hot unplug/replug the ExpressCard adapter to recover,
>>> but that doesn't work so well for built-in SATA/eSATA ports.
>>
>>
>> Mmm.. on my little Atom ZBOX systems, the patch linked above
>> "Patchwork [v2] libata: disable runtime pm for hotpluggable port"
>> _does_ appear to fix the issue.
>>
>> Maybe my notebook is suffering from the ExpressCard not being resumed properly,
>> which would be a PCI issue most likely.
>>
>> Anyway, one issue at a time:  The "disable runtime pm" patch seems to
>> be the regression fix I'm looking for here so that I can use SATA hotplug
>> after a suspend/resume.
>>
>> Why isn't this upstream as a regression fix yet?
>>
>> Thanks
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> echo on > /sys/devices/pci0000:00/0000:00:1f.2/ata5/power/control
> echo on > /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4/power/control
> echo '- - -' > /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4/scsi_host/host4/scan
> 
> Substituting the appropriate values to poke the right devices

I am having same issue with my laptop ... I have two external SATA disks (1TB and 3TB) and
an eSATA to SATA cable. When I plugin one of the disks (the 1TB in this test) into the
eSATA socket it gets detected. When I unplug the disk, dmesg receives:

[ 3155.563123] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
[ 3155.563132] ata6: irq_stat 0x00400040, connection status changed
[ 3155.563141] ata6: SError: { PHYRdyChg 10B8B DevExch }
[ 3155.563157] ata6: hard resetting link
[ 3156.306517] ata6: SATA link down (SStatus 0 SControl 300)
[ 3161.299061] ata6: hard resetting link
[ 3161.648549] ata6: SATA link down (SStatus 0 SControl 300)
[ 3161.648567] ata6: limiting SATA link speed to 1.5 Gbps
[ 3166.641111] ata6: hard resetting link
[ 3166.990595] ata6: SATA link down (SStatus 0 SControl 310)
[ 3166.990611] ata6.00: disabled
[ 3167.010556] ata6: EH complete
[ 3167.010576] ata6.00: detaching (SCSI 5:0:0:0)
[ 3167.011128] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[ 3167.011153] sd 5:0:0:0: [sdc]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3167.011157] sd 5:0:0:0: [sdc] Stopping disk
[ 3167.011164] sd 5:0:0:0: [sdc] START_STOP FAILED
[ 3167.011166] sd 5:0:0:0: [sdc]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

Now the eSATA port seems dead and I cannot get the other drive recognized at all
when plugged into the eSATA slot. No, I did not suspend my laptop in between at all,
the hotplug feature itself is not working. While reading this post, I did *while having
the eSATA port seemingly dead*:

# lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02)
# cat /sys/devices/pci0000:00/0000:00:1f.2/ata6/power/control
auto
#

Fix: I got my 3TB disk detected by this single command:

# echo on >  /sys/devices/pci0000:00/0000:00:1f.2/ata6/power/control
#

This is a Dell Vostro 3550 with A09 BIOS. Same happend with 3.4-rc3 kernel.

I can do some more testing if you want me to.
Best,
Martin
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.2-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #4 SMP Sun Apr 15 11:51:10 MEST 2012
[    0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[    0.000000]  BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000da4e5000 (usable)
[    0.000000]  BIOS-e820: 00000000da4e5000 - 00000000da528000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000da528000 - 00000000da793000 (usable)
[    0.000000]  BIOS-e820: 00000000da793000 - 00000000da967000 (reserved)
[    0.000000]  BIOS-e820: 00000000da967000 - 00000000daa89000 (usable)
[    0.000000]  BIOS-e820: 00000000daa89000 - 00000000dad68000 (reserved)
[    0.000000]  BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A09 09/30/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FE0000000 write-back
[    0.000000]   2 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 41FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000daa89000
[    0.000000]  0000000000 - 00daa00000 page 2M
[    0.000000]  00daa00000 - 00daa89000 page 4k
[    0.000000] kernel direct mapping tables up to daa89000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[    0.000000]  0100000000 - 041fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 41fe00000 @ daa77000-daa89000
[    0.000000] ACPI: RSDP 00000000000f0410 00024 (v02   DELL)
[    0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000daff1d08 000F4 (v04   DELL     WN09 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000dafe8180 09B85 (v02   DELL     WN09 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000dafe3f80 00040
[    0.000000] ACPI: APIC 00000000daff1e00 00072 (v03   DELL     WN09 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000daff1e78 0003C (v01   DELL     WN09 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000daff1eb8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: SLIC 00000000daff2368 00176 (v01 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI: HPET 00000000daff24e0 00038 (v01   DELL     WN09 01072009 AMI. 00000004)
[    0.000000] ACPI: SSDT 00000000daff2518 00846 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000daff2d60 00996 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 00000000daff36f8 000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
[    0.000000] ACPI: OSFR 00000000daff37e0 00086 (v01 DELL    M08     07DB091E ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000041fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[    0.000000]   NODE_DATA [000000041fdfb000 - 000000041fdfffff]
[    0.000000]  [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0041fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000da4e5
[    0.000000]     0: 0x000da528 -> 0x000da793
[    0.000000]     0: 0x000da967 -> 0x000daa89
[    0.000000]     0: 0x00100000 -> 0x0041fe00
[    0.000000] On node 0 totalpages: 4170239
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 875690 pages, LIFO batch:31
[    0.000000]   Normal zone: 44793 pages used for memmap
[    0.000000]   Normal zone: 3231495 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[    0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[    0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[    0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[    0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[    0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041fa00000 s71936 r8192 d22272 u524288
[    0.000000] pcpu-alloc: s71936 r8192 d22272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4111105
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 16372232k/17299456k available (5635k kernel code, 618500k absent, 308724k reserved, 3582k data, 544k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.010000] Detected 2793.599 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.19 BogoMIPS (lpj=27935990)
[    0.000191] pid_max: default: 32768 minimum: 301
[    0.001151] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.004157] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005538] Mount-cache hash table entries: 256
[    0.005738] CPU: Physical Processor ID: 0
[    0.005831] CPU: Processor Core ID: 0
[    0.005926] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.005927] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006119] mce: CPU supports 7 MCE banks
[    0.006221] CPU0: Thermal monitoring enabled (TM1)
[    0.006319] using mwait in idle threads.
[    0.006471] ACPI: Core revision 20120111
[    0.022703] DMAR: Host address width 36
[    0.022795] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.022895] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.023040] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.023136] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.023281] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[    0.023375] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.023541] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.023636] HPET id 0 under DRHD base 0xfed91000
[    0.023729] HPET id 0 under DRHD base 0xfed91000
[    0.023822] HPET id 0 under DRHD base 0xfed91000
[    0.023914] HPET id 0 under DRHD base 0xfed91000
[    0.024006] HPET id 0 under DRHD base 0xfed91000
[    0.024100] HPET id 0 under DRHD base 0xfed91000
[    0.024193] HPET id 0 under DRHD base 0xfed91000
[    0.024284] HPET id 0 under DRHD base 0xfed91000
[    0.024536] Enabled IRQ remapping in x2apic mode
[    0.024629] Enabling x2apic
[    0.024720] Enabled x2apic
[    0.024813] Switched APIC routing to cluster x2apic.
[    0.025330] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.125279] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[    0.236481] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.236745] PEBS disabled due to CPU errata.
[    0.236839] ... version:                3
[    0.236930] ... bit width:              48
[    0.237023] ... generic registers:      4
[    0.237116] ... value mask:             0000ffffffffffff
[    0.237210] ... max period:             000000007fffffff
[    0.237304] ... fixed-purpose events:   3
[    0.237396] ... event mask:             000000070000000f
[    0.237575] NMI watchdog enabled, takes one hw-pmu counter.
[    0.237747] Booting Node   0, Processors  #1
[    0.237833] smpboot cpu 1: start_ip = 98000
[    0.270332] NMI watchdog enabled, takes one hw-pmu counter.
[    0.270501]  #2
[    0.270543] smpboot cpu 2: start_ip = 98000
[    0.301729] NMI watchdog enabled, takes one hw-pmu counter.
[    0.301904]  #3 Ok.
[    0.301994] smpboot cpu 3: start_ip = 98000
[    0.333081] NMI watchdog enabled, takes one hw-pmu counter.
[    0.333198] Brought up 4 CPUs
[    0.333290] Total of 4 processors activated (22348.79 BogoMIPS).
[    0.336311] devtmpfs: initialized
[    0.336532] PM: Registering ACPI NVS region at da4e5000 (274432 bytes)
[    0.336639] PM: Registering ACPI NVS region at dad68000 (2621440 bytes)
[    0.336858] xor: automatically using best checksumming function: generic_sse
[    0.386255]    generic_sse: 12451.600 MB/sec
[    0.386349] xor: using function: generic_sse (12451.600 MB/sec)
[    0.386578] print_constraints: dummy: 
[    0.386744] NET: Registered protocol family 16
[    0.387135] ACPI: bus type pci registered
[    0.387334] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.387483] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.393926] PCI: Using configuration type 1 for base access
[    0.400067] bio: create slab <bio-0> at 0
[    0.565998] raid6: int64x1   2925 MB/s
[    0.735742] raid6: int64x2   3000 MB/s
[    0.905488] raid6: int64x4   2722 MB/s
[    1.075223] raid6: int64x8   1726 MB/s
[    1.244962] raid6: sse2x1    7569 MB/s
[    1.414703] raid6: sse2x2    9247 MB/s
[    1.584446] raid6: sse2x4   10583 MB/s
[    1.584535] raid6: using algorithm sse2x4 (10583 MB/s)
[    1.584672] ACPI: Added _OSI(Module Device)
[    1.584765] ACPI: Added _OSI(Processor Device)
[    1.584858] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.584953] ACPI: Added _OSI(Processor Aggregator Device)
[    1.586240] ACPI: EC: Look up EC in DSDT
[    1.587558] ACPI: Executed 1 blocks of module-level executable AML code
[    1.592596] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.597038] ACPI: SSDT 00000000dad51698 0064F (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.597578] ACPI: Dynamic OEM Table Load:
[    1.597748] ACPI: SSDT           (null) 0064F (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.598250] ACPI: SSDT 00000000dad52a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    1.598826] ACPI: Dynamic OEM Table Load:
[    1.598996] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    1.599388] ACPI: SSDT 00000000dad50d98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.599916] ACPI: Dynamic OEM Table Load:
[    1.600085] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.600870] ACPI: Interpreter enabled
[    1.600963] ACPI: (supports S0 S1 S3 S4 S5)
[    1.601271] ACPI: Using IOAPIC for interrupt routing
[    1.626745] ACPI: No dock devices found.
[    1.626842] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.627315] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.627849] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.627947] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.628044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.628190] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    1.628334] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.628479] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.628625] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    1.628768] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.628912] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    1.629056] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[    1.629201] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    1.629389] PCI host bridge to bus 0000:00
[    1.629484] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.629580] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.629676] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.629775] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.629872] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.629969] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.630065] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.630163] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.630260] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.630356] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    1.630453] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    1.630555] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    1.630589] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[    1.630598] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[    1.630603] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.630607] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    1.630657] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.630679] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[    1.630753] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.630787] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.630807] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[    1.630894] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.630920] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.630935] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    1.631000] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.631025] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.631101] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.631130] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    1.631206] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.631233] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    1.631309] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.631340] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    1.631471] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.631512] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[    1.631642] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    1.631682] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.631702] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[    1.631789] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.631816] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
[    1.631937] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    1.631955] pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]
[    1.631963] pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]
[    1.631971] pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]
[    1.631979] pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]
[    1.631986] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    1.631994] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[    1.632037] pci 0000:00:1f.2: PME# supported from D3hot
[    1.632058] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.632072] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    1.632093] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    1.632161] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.632328] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[    1.632347] pci 0000:05:00.0: reg 10: [io  0xe000-0xe0ff]
[    1.632381] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[    1.632402] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[    1.632493] pci 0000:05:00.0: supports D1 D2
[    1.632494] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.644392] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    1.644532] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    1.644540] pci 0000:00:1c.1:   bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[    1.644743] pci 0000:09:00.0: [8086:008a] type 0 class 0x000280
[    1.644890] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[    1.645560] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    1.664476] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[    1.664574] pci 0000:00:1c.3:   bridge window [mem 0xf7e00000-0xf7efffff]
[    1.664674] pci 0000:0b:00.0: [104c:8241] type 0 class 0x000c03
[    1.664699] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    1.664718] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[    1.664823] pci 0000:0b:00.0: supports D1 D2
[    1.664824] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.684328] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    1.684473] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    1.684553] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[    1.684650] pci 0000:00:1c.7:   bridge window [io  0xc000-0xdfff]
[    1.684656] pci 0000:00:1c.7:   bridge window [mem 0xf6c00000-0xf7cfffff]
[    1.684665] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[    1.684694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.684863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.684900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.684939] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.684976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    1.685028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[    1.685158]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.685462]  pci0000:00: ACPI _OSC control (0x19) granted
[    1.690225] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.690793] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.691357] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.691920] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.692482] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.693171] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.693858] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.694424] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.695075] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.695228] vgaarb: loaded
[    1.695318] vgaarb: bridge control possible 0000:00:02.0
[    1.695564] SCSI subsystem initialized
[    1.695743] libata version 3.00 loaded.
[    1.695870] usbcore: registered new interface driver usbfs
[    1.695988] usbcore: registered new interface driver hub
[    1.696112] usbcore: registered new device driver usb
[    1.696612] wmi: Mapper loaded
[    1.696748] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    1.696843] PCI: Using ACPI for IRQ routing
[    1.698853] PCI: pci_cache_line_size set to 64 bytes
[    1.698985] reserve RAM buffer: 000000000009d400 - 000000000009ffff 
[    1.698987] reserve RAM buffer: 00000000da4e5000 - 00000000dbffffff 
[    1.698990] reserve RAM buffer: 00000000da793000 - 00000000dbffffff 
[    1.698993] reserve RAM buffer: 00000000daa89000 - 00000000dbffffff 
[    1.698995] reserve RAM buffer: 000000041fe00000 - 000000041fffffff 
[    1.699130] Bluetooth: Core ver 2.16
[    1.699241] NET: Registered protocol family 31
[    1.699335] Bluetooth: HCI device and connection manager initialized
[    1.699432] Bluetooth: HCI socket layer initialized
[    1.699526] Bluetooth: L2CAP socket layer initialized
[    1.699624] Bluetooth: SCO socket layer initialized
[    1.699782] cfg80211: Calling CRDA to update world regulatory domain
[    1.699962] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.700407] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.702511] Switching to clocksource hpet
[    1.702680] pnp: PnP ACPI init
[    1.702781] ACPI: bus type pnp registered
[    1.703114] pnp 00:00: [bus 00-3e]
[    1.703116] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.703118] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.703120] pnp 00:00: [io  0x0d00-0xffff window]
[    1.703122] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.703123] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.703125] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.703126] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.703128] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.703130] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.703131] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.703133] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.703134] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.703136] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.703137] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.703139] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.703141] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.703142] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.703144] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[    1.703145] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.703214] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.703228] pnp 00:01: [io  0x0000-0x001f]
[    1.703230] pnp 00:01: [io  0x0081-0x0091]
[    1.703231] pnp 00:01: [io  0x0093-0x009f]
[    1.703233] pnp 00:01: [io  0x00c0-0x00df]
[    1.703235] pnp 00:01: [dma 4]
[    1.703277] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.703285] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.703324] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.703400] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.703441] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.703453] pnp 00:04: [io  0x002e-0x002f]
[    1.703455] pnp 00:04: [io  0x004e-0x004f]
[    1.703456] pnp 00:04: [io  0x0061]
[    1.703457] pnp 00:04: [io  0x0063]
[    1.703459] pnp 00:04: [io  0x0065]
[    1.703460] pnp 00:04: [io  0x0067]
[    1.703461] pnp 00:04: [io  0x0070]
[    1.703462] pnp 00:04: [io  0x0080]
[    1.703464] pnp 00:04: [io  0x0092]
[    1.703465] pnp 00:04: [io  0x00b2-0x00b3]
[    1.703466] pnp 00:04: [io  0x0680-0x069f]
[    1.703468] pnp 00:04: [io  0x1000-0x100f]
[    1.703469] pnp 00:04: [io  0xffff]
[    1.703470] pnp 00:04: [io  0xffff]
[    1.703471] pnp 00:04: [io  0x0400-0x0453]
[    1.703473] pnp 00:04: [io  0x0458-0x047f]
[    1.703474] pnp 00:04: [io  0x0500-0x057f]
[    1.703475] pnp 00:04: [io  0x164e-0x164f]
[    1.703530] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.703629] system 00:04: [io  0x1000-0x100f] has been reserved
[    1.703725] system 00:04: [io  0xffff] has been reserved
[    1.703820] system 00:04: [io  0xffff] has been reserved
[    1.703914] system 00:04: [io  0x0400-0x0453] has been reserved
[    1.704010] system 00:04: [io  0x0458-0x047f] has been reserved
[    1.704105] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.704201] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.704307] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.704316] pnp 00:05: [io  0x0070-0x0077]
[    1.704325] pnp 00:05: [irq 8]
[    1.704371] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.704399] pnp 00:06: [io  0x0454-0x0457]
[    1.704458] system 00:06: [io  0x0454-0x0457] has been reserved
[    1.704554] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.704563] pnp 00:07: [io  0x00f0-0x00ff]
[    1.704569] pnp 00:07: [irq 13]
[    1.704618] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.704634] pnp 00:08: [io  0x0010-0x001f]
[    1.704636] pnp 00:08: [io  0x0022-0x003f]
[    1.704637] pnp 00:08: [io  0x0044-0x005f]
[    1.704638] pnp 00:08: [io  0x0068-0x006f]
[    1.704639] pnp 00:08: [io  0x0072-0x007f]
[    1.704641] pnp 00:08: [io  0x0080]
[    1.704642] pnp 00:08: [io  0x0084-0x0086]
[    1.704644] pnp 00:08: [io  0x0088]
[    1.704645] pnp 00:08: [io  0x008c-0x008e]
[    1.704647] pnp 00:08: [io  0x0090-0x009f]
[    1.704648] pnp 00:08: [io  0x00a2-0x00bf]
[    1.704649] pnp 00:08: [io  0x00e0-0x00ef]
[    1.704650] pnp 00:08: [io  0x04d0-0x04d1]
[    1.704652] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[    1.704712] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    1.704812] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[    1.704908] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.704925] pnp 00:09: [irq 12]
[    1.704970] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[    1.704984] pnp 00:0a: [io  0x0060]
[    1.704985] pnp 00:0a: [io  0x0064]
[    1.704987] pnp 00:0a: [io  0x0062]
[    1.704988] pnp 00:0a: [io  0x0066]
[    1.704994] pnp 00:0a: [irq 1]
[    1.705036] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.705226] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[    1.705228] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[    1.705229] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[    1.705231] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[    1.705232] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[    1.705234] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[    1.705235] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[    1.705236] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[    1.705238] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    1.705239] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    1.705241] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[    1.705310] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.705409] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.705506] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.705603] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.705700] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.705798] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.705895] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.705992] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.706090] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    1.706186] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.706283] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    1.706380] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.706438] pnp 00:0c: [irq 20]
[    1.706498] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[    1.706608] pnp 00:0d: [mem 0x20000000-0x201fffff]
[    1.706609] pnp 00:0d: [mem 0x40000000-0x401fffff]
[    1.706681] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[    1.706780] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[    1.706878] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.706919] pnp: PnP ACPI: found 14 devices
[    1.707012] ACPI: ACPI bus type pnp unregistered
[    1.715402] PCI: max bus depth: 1 pci_try_num: 2
[    1.715449] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.715552] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    1.715648] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    1.715748] pci 0000:00:1c.1:   bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[    1.715896] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[    1.715994] pci 0000:00:1c.3:   bridge window [mem 0xf7e00000-0xf7efffff]
[    1.716094] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    1.716193] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    1.716301] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[    1.716397] pci 0000:00:1c.7:   bridge window [io  0xc000-0xdfff]
[    1.716498] pci 0000:00:1c.7:   bridge window [mem 0xf6c00000-0xf7cfffff]
[    1.716596] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[    1.716786] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.716788] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.716789] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.716791] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.716792] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.716794] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.716795] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.716797] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.716799] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.716800] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    1.716802] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[    1.716804] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    1.716805] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[    1.716807] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[    1.716809] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    1.716810] pci_bus 0000:11: resource 0 [io  0xc000-0xdfff]
[    1.716812] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[    1.716813] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[    1.716864] NET: Registered protocol family 2
[    1.717215] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    1.718174] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.719400] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.719624] TCP: Hash tables configured (established 524288 bind 65536)
[    1.719721] TCP reno registered
[    1.719829] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.719978] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.720173] NET: Registered protocol family 1
[    1.721603] pci 0000:00:02.0: Boot video device
[    1.962404] PCI: CLS 64 bytes, default 64
[    1.962463] DMAR: No ATSR found
[    1.962580] IOMMU 0 0xfed90000: using Queued invalidation
[    1.962675] IOMMU 1 0xfed91000: using Queued invalidation
[    1.962770] IOMMU: Setting RMRR:
[    1.962871] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[    1.963369] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[    1.963534] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[    1.963688] IOMMU: Prepare 0-16MiB unity mapping for LPC
[    1.963789] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    1.964222] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[    1.967156] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[    1.967260] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[    1.967362] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[    1.967465] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[    1.967613] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    1.968715] sha1_ssse3: Using AVX optimized SHA-1 implementation
[    1.969976] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.971860] DLM installed
[    1.972089] msgmni has been set to 32105
[    1.973444] NET: Registered protocol family 38
[    1.973540] async_tx: api initialized (async)
[    1.973672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.973818] io scheduler noop registered
[    1.973910] io scheduler deadline registered
[    1.974020] io scheduler cfq registered (default)
[    1.974455] pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
[    1.974678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.974862] pciehp 0000:00:1c.7:pcie04: Hotplug Controller:
[    1.974957] pciehp 0000:00:1c.7:pcie04:   Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 42
[    1.975102] pciehp 0000:00:1c.7:pcie04:   Vendor ID            : 0x8086
[    1.975198] pciehp 0000:00:1c.7:pcie04:   Device ID            : 0x1c1e
[    1.975295] pciehp 0000:00:1c.7:pcie04:   Subsystem ID         : 0x04b3
[    1.975391] pciehp 0000:00:1c.7:pcie04:   Subsystem Vendor ID  : 0x1028
[    1.975489] pciehp 0000:00:1c.7:pcie04:   PCIe Cap offset      : 0x40
[    1.975586] pciehp 0000:00:1c.7:pcie04:   PCI resource [13]     : [io  0xc000-0xdfff]
[    1.975731] pciehp 0000:00:1c.7:pcie04:   PCI resource [14]     : [mem 0xf6c00000-0xf7cfffff]
[    1.975878] pciehp 0000:00:1c.7:pcie04:   PCI resource [15]     : [mem 0xf0000000-0xf10fffff 64bit pref]
[    1.976025] pciehp 0000:00:1c.7:pcie04: Slot Capabilities      : 0x003cb260
[    1.976123] pciehp 0000:00:1c.7:pcie04:   Physical Slot Number : 7
[    1.976220] pciehp 0000:00:1c.7:pcie04:   Attention Button     :  no
[    1.976316] pciehp 0000:00:1c.7:pcie04:   Power Controller     :  no
[    1.976412] pciehp 0000:00:1c.7:pcie04:   MRL Sensor           :  no
[    1.976508] pciehp 0000:00:1c.7:pcie04:   Attention Indicator  :  no
[    1.976604] pciehp 0000:00:1c.7:pcie04:   Power Indicator      :  no
[    1.976700] pciehp 0000:00:1c.7:pcie04:   Hot-Plug Surprise    : yes
[    1.976796] pciehp 0000:00:1c.7:pcie04:   EMI Present          :  no
[    1.976892] pciehp 0000:00:1c.7:pcie04:   Command Completed    :  no
[    1.976991] pciehp 0000:00:1c.7:pcie04: Slot Status            : 0x0000
[    1.977088] pciehp 0000:00:1c.7:pcie04: Slot Control           : 0x0000
[    1.977186] pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported
[    1.977194] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028 ss_did 4b3
[    1.977343] pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7
[    1.977396] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 28
[    1.977398] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[    1.977426] pciehp: pcie_port_service_register = 0
[    1.977427] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.977523] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.978121] intel_idle: MWAIT substates: 0x21120
[    1.978122] intel_idle: v0.4 model 0x2A
[    1.978123] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.978222] ACPI: AC Adapter [AC] (on-line)
[    1.978427] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.979682] ACPI: Lid Switch [LID0]
[    1.979835] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.979984] ACPI: Power Button [PWRB]
[    1.980130] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.980277] ACPI: Sleep Button [SBTN]
[    1.980429] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.980574] ACPI: Power Button [PWRF]
[    1.989206] thermal LNXTHERM:00: registered as thermal_zone0
[    1.989301] ACPI: Thermal Zone [THM] (64 C)
[    1.989522] GHES: HEST is not enabled!
[    2.012659] ACPI: Battery Slot [BAT0] (battery present)
[    2.015747] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.016654] Non-volatile memory driver v1.3
[    2.017081] i8k: unable to get SMM BIOS version
[    2.020915] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@xxxxxxxxxx)
[    2.021136] Linux agpgart interface v0.103
[    2.021275] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    2.021452] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    2.022625] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    2.022878] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    2.023072] ipmi message handler version 39.2
[    2.023172] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    2.023318] Hangcheck: Using getrawmonotonic().
[    2.023452] [drm] Initialized drm 1.1.0 20060810
[    2.023561] i915 0000:00:02.0: setting latency timer to 64
[    2.057402] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    2.057549] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    2.058216] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    2.058224] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.058321] [drm] Driver supports precise vblank timestamp query.
[    2.058444] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.086096] Refined TSC clocksource calibration: 2793.654 MHz.
[    3.086194] Switching to clocksource tsc
[    3.147541] fbcon: inteldrmfb (fb0) is primary device
[    3.648956] Console: switching to colour frame buffer device 170x48
[    3.651683] fb0: inteldrmfb frame buffer device
[    3.651684] drm: registered panic notifier
[    3.652902] acpi device:34: registered as cooling_device4
[    3.653142] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    3.653192] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.653254] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.654220] loop: module loaded
[    3.654368] ahci 0000:00:1f.2: version 3.0
[    3.654415] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    3.654441] ahci: SSS flag set, parallel bus scan disabled
[    3.669727] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[    3.669838] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    3.669880] ahci 0000:00:1f.2: setting latency timer to 64
[    3.710544] scsi0 : ahci
[    3.710684] scsi1 : ahci
[    3.710797] scsi2 : ahci
[    3.710911] scsi3 : ahci
[    3.711019] scsi4 : ahci
[    3.711126] scsi5 : ahci
[    3.711469] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
[    3.711504] ata2: DUMMY
[    3.712456] ata3: DUMMY
[    3.713388] ata4: DUMMY
[    3.714309] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
[    3.715262] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
[    3.716355] tun: Universal TUN/TAP device driver, 1.6
[    3.717279] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    3.718270] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.719305] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[    3.719459] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900065d2000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 45
[    3.720430] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.721425] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[    3.722436] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.723416] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.723420] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    3.724367] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.725338] ehci_hcd 0000:00:1a.0: debug port 2
[    3.730133] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    3.730146] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[    3.749582] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.750609] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.751529] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.752449] usb usb1: Product: EHCI Host Controller
[    3.753358] usb usb1: Manufacturer: Linux 3.3.2-default ehci_hcd
[    3.754277] usb usb1: SerialNumber: 0000:00:1a.0
[    3.755307] hub 1-0:1.0: USB hub found
[    3.756222] hub 1-0:1.0: 2 ports detected
[    3.757210] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.757213] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    3.758138] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.759089] ehci_hcd 0000:00:1d.0: debug port 2
[    3.763896] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    3.763907] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[    3.779536] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.780545] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.781451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.782343] usb usb2: Product: EHCI Host Controller
[    3.783229] usb usb2: Manufacturer: Linux 3.3.2-default ehci_hcd
[    3.784117] usb usb2: SerialNumber: 0000:00:1d.0
[    3.785098] hub 2-0:1.0: USB hub found
[    3.785969] hub 2-0:1.0: 2 ports detected
[    3.786883] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.787817] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    3.788701] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[    3.789789] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
[    3.790777] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
[    3.790782] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
[    3.790787] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
[    3.790791] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
[    3.790795] xhci_hcd 0000:0b:00.0: irq 50 for MSI/MSI-X
[    3.790893] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.791822] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.792748] usb usb3: Product: xHCI Host Controller
[    3.793658] usb usb3: Manufacturer: Linux 3.3.2-default xhci_hcd
[    3.794591] usb usb3: SerialNumber: 0000:0b:00.0
[    3.795598] xHCI xhci_add_endpoint called for root hub
[    3.795600] xHCI xhci_check_bandwidth called for root hub
[    3.795639] hub 3-0:1.0: USB hub found
[    3.796572] hub 3-0:1.0: 2 ports detected
[    3.797538] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    3.798466] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[    3.799410] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.800343] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.801256] usb usb4: Product: xHCI Host Controller
[    3.802148] usb usb4: Manufacturer: Linux 3.3.2-default xhci_hcd
[    3.803036] usb usb4: SerialNumber: 0000:0b:00.0
[    3.803974] xHCI xhci_add_endpoint called for root hub
[    3.803976] xHCI xhci_check_bandwidth called for root hub
[    3.804013] hub 4-0:1.0: USB hub found
[    3.804888] hub 4-0:1.0: 2 ports detected
[    3.805860] usbcore: registered new interface driver uas
[    3.806809] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[    3.809846] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.810746] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.811749] mousedev: PS/2 mouse device common for all mice
[    3.812911] rtc_cmos 00:05: RTC can wake from S4
[    3.813904] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.814824] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.815741] i2c /dev entries driver
[    3.817237] Linux media interface: v0.10
[    3.818153] Linux video capture interface: v2.00
[    3.819070] gspca_main: v2.14.0 registered
[    3.820009] usbcore: registered new interface driver uvcvideo
[    3.820923] USB Video Class driver (1.1.1)
[    3.821936] coretemp coretemp.0: TjMax is 100 degrees C
[    3.821952] coretemp coretemp.0: TjMax is 100 degrees C
[    3.821965] coretemp coretemp.0: TjMax is 100 degrees C
[    3.821995] i2c-core: driver [max6639] using legacy suspend method
[    3.822922] i2c-core: driver [max6639] using legacy resume method
[    3.823836] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    3.824831] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    3.825799] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.826720] iTCO_vendor_support: vendor-support=0
[    3.827003] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    3.828616] md: linear personality registered for level -1
[    3.829581] md: raid0 personality registered for level 0
[    3.830535] md: raid1 personality registered for level 1
[    3.831472] md: raid10 personality registered for level 10
[    3.832403] md: raid6 personality registered for level 6
[    3.833331] md: raid5 personality registered for level 5
[    3.834243] md: raid4 personality registered for level 4
[    3.835192] device-mapper: uevent: version 1.0.3
[    3.836157] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
[    3.837138] device-mapper: dm-log-userspace: version 1.1.0 loaded
[    3.838088] usbcore: registered new interface driver btusb
[    3.839078] cpuidle: using governor ladder
[    3.840109] cpuidle: using governor menu
[    3.841070] sdhci: Secure Digital Host Controller Interface driver
[    3.841988] sdhci: Copyright(c) Pierre Ossman
[    3.843547] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.845358] usbcore: registered new interface driver usbhid
[    3.846282] usbhid: USB HID core driver
[    3.847269] mei 0000:00:16.0: setting latency timer to 64
[    3.847316] mei 0000:00:16.0: irq 51 for MSI/MSI-X
[    3.874899] input: Dell WMI hotkeys as /devices/virtual/input/input6
[    3.886054] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[    3.886265] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[    4.059178] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.065643] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    4.066975] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[    4.068028] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.069133] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    4.074032] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    4.075380] ata1.00: configured for UDMA/133
[    4.089322] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[    4.090982] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    4.092020] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.093188] sd 0:0:0:0: [sda] Write Protect is off
[    4.093198] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.095217] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.095271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.192104]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    4.194227] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.219324] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    4.220424] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.222038] hub 1-1:1.0: USB hub found
[    4.223188] hub 1-1:1.0: 6 ports detected
[    4.338875] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    4.438601] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.443006] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[    4.449817] ata5.00: configured for UDMA/100
[    4.457853] scsi 4:0:0:0: CD-ROM            PLDS     DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[    4.467362] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.468497] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.469899] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    4.470047] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    4.488920] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    4.490041] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.491691] hub 2-1:1.0: USB hub found
[    4.492910] hub 2-1:1.0: 8 ports detected
[    4.499854] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    4.520063] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[    4.521142] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[    4.522217] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[    4.525800] HDMI: detected monitor PLB2403WS at connection type HDMI
[    4.526871] HDMI: available speakers: FL/FR
[    4.527941] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 24
[    4.529026] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[    4.530174] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[    4.537866] HDMI: detected monitor PLB2403WS at connection type HDMI
[    4.537949] HDMI: detected monitor PLB2403WS at connection type HDMI
[    4.537950] HDMI: available speakers: FL/FR
[    4.537952] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 24
[    4.542110] HDMI: available speakers: FL/FR
[    4.543152] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 24
[    4.544326] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.545525] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.546706] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.548455] ALSA device list:
[    4.549534]   #0: HDA Intel PCH at 0xf7f00000 irq 52
[    4.550617] TCP cubic registered
[    4.551656] NET: Registered protocol family 17
[    4.552817] Bluetooth: RFCOMM TTY layer initialized
[    4.553880] Bluetooth: RFCOMM socket layer initialized
[    4.554947] Bluetooth: RFCOMM ver 1.11
[    4.555955] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.556996] Bluetooth: BNEP filters: protocol multicast
[    4.558003] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.559462] sctp: Hash tables configured (established 65536 bind 65536)
[    4.560698] Registering the dns_resolver key type
[    4.562179] PM: Checking hibernation image partition /dev/sda6
[    4.562184] PM: Hibernation image partition 8:6 present
[    4.562186] PM: Looking for hibernation image.
[    4.598431] PM: Image not found (code -22)
[    4.598438] PM: Hibernation image not present or could not be loaded.
[    4.598464] registered taskstats version 1
[    4.600656] rtc_cmos 00:05: setting system clock to 2012-04-18 16:01:36 UTC (1334764896)
[    4.602603] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    4.608342] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    4.662315] usb 3-1: New USB device found, idVendor=046d, idProduct=c050
[    4.663291] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.664163] usb 3-1: Product: USB-PS/2 Optical Mouse
[    4.665044] usb 3-1: Manufacturer: Logitech
[    4.666108] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    4.683576] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input11
[    4.684923] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1/input0
[    4.758284] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[    4.808548] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[    4.818027] ata6: SATA link down (SStatus 0 SControl 300)
[    4.823260] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[    4.827179] md: Waiting for all devices to be available before autodetect
[    4.828185] md: If you don't use raid, use raid=noautodetect
[    4.829524] md: Autodetecting RAID arrays.
[    4.830520] md: Scanned 0 and added 0 devices.
[    4.831504] md: autorun ...
[    4.832463] md: ... autorun DONE.
[    4.875541] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[    4.876590] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.877552] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[    4.878517] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[    4.880518] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[    4.883488] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[    4.899587] kjournald starting.  Commit interval 5 seconds
[    4.899817] EXT3-fs (sda5): mounted filesystem with writeback data mode
[    4.899824] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[    4.948915] devtmpfs: mounted
[    4.950050] Freeing unused kernel memory: 544k freed
[    4.957983] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[    5.076369] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[    5.077419] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.078382] usb 2-1.2: Product: USB Keyboard
[    5.079312] usb 2-1.2: Manufacturer: CHICONY
[    5.085522] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input15
[    5.086699] generic-usb 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[    5.167664] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
[    5.278997] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
[    5.280085] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    5.281070] usb 2-1.3: SerialNumber: 56ed5821afe2
[    5.357379] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd
[    5.723209] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[    5.724294] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.725279] usb 2-1.6: Product: USB2.0-CRW
[    5.726276] usb 2-1.6: Manufacturer: Generic
[    5.727277] usb 2-1.6: SerialNumber: 20090516388200000
[    8.361452] udevd[1759]: starting version 171
[   10.938763] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251)
[   10.938769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.796381] Initializing USB Mass Storage driver...
[   11.796478] scsi6 : usb-storage 2-1.6:1.0
[   11.796557] usbcore: registered new interface driver usb-storage
[   11.796560] USB Mass Storage support registered.
[   11.867354] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[   11.867356] Copyright(c) 2003-2011 Intel Corporation
[   11.867495] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[   11.867497] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90006684000
[   11.867499] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[   11.867595] iwlwifi 0000:09:00.0: irq 53 for MSI/MSI-X
[   11.867629] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   11.867630] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   11.867631] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   11.867633] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[   11.867634] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[   11.867640] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[   11.867708] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   11.884825] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[   11.884826] iwlwifi 0000:09:00.0: Device SKU: 0x150
[   11.884828] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[   11.884837] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   11.884976] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio.
[   12.035535] iwlwifi 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
[   12.035642] Registered led device: phy0-led
[   12.035704] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   12.781795] EXT3-fs (sda5): using internal journal
[   12.789361] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[   12.789497] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   12.979352] Adding 4998972k swap on /dev/sda6.  Priority:-1 extents:1 across:4998972k 
[   16.520207] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[   16.544277] r8169 0000:05:00.0: eth0: link down
[   16.544283] r8169 0000:05:00.0: eth0: link down
[   18.705548] r8169 0000:05:00.0: eth0: link up
[   19.961996] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   23.555074] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[   23.555444] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[   23.555798] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[   23.556169] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[   24.030001] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[   24.271868] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[   24.271925] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   24.488888] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   24.488933] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   24.788284] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   24.791790] HDMI: detected monitor PLB2403WS at connection type HDMI
[   24.791792] HDMI: available speakers: FL/FR
[   24.791794] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 24
[   25.523579] r8169 0000:05:00.0: eth0: link down
[   28.481778] r8169 0000:05:00.0: eth0: link up
[   48.293857] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[   48.537518] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[   48.537554] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   48.752748] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   48.752793] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   49.052127] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   49.055652] HDMI: detected monitor PLB2403WS at connection type HDMI
[   49.055654] HDMI: available speakers: FL/FR
[   49.055656] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 24
[   49.891069] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[   49.891114] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   50.050912] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   50.050968] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   50.350183] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[   50.353690] HDMI: detected monitor PLB2403WS at connection type HDMI
[   50.353694] HDMI: available speakers: FL/FR
[   50.353697] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 24
[   52.912322] ata1.00: configured for UDMA/133
[   52.912325] ata1: EH complete
[   90.627674] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
[   90.627678] ata6: irq_stat 0x00400040, connection status changed
[   90.627682] ata6: SError: { PHYRdyChg CommWake DevExch }
[   90.627690] ata6: hard resetting link
[   96.401640] ata6: link is slow to respond, please be patient (ready=0)
[   97.959329] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   98.177189] ata6.00: ATA-8: WDC WD10TPVT-00HT5T0, 01.01A01, max UDMA/133
[   98.177199] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   98.183134] ata6.00: configured for UDMA/133
[   98.198960] ata6: EH complete
[   98.199115] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10TPVT-00H 01.0 PQ: 0 ANSI: 5
[   98.199238] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   98.199265] sd 5:0:0:0: Attached scsi generic sg3 type 0
[   98.199309] sd 5:0:0:0: [sdc] Write Protect is off
[   98.199312] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   98.199376] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   98.204428]  sdc: sdc1
[   98.204785] sd 5:0:0:0: [sdc] Attached SCSI disk
[  118.094916] kjournald starting.  Commit interval 5 seconds
[  118.095572] EXT3-fs (sdc1): using internal journal
[  118.095580] EXT3-fs (sdc1): mounted filesystem with writeback data mode
[ 3155.563123] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
[ 3155.563132] ata6: irq_stat 0x00400040, connection status changed
[ 3155.563141] ata6: SError: { PHYRdyChg 10B8B DevExch }
[ 3155.563157] ata6: hard resetting link
[ 3156.306517] ata6: SATA link down (SStatus 0 SControl 300)
[ 3161.299061] ata6: hard resetting link
[ 3161.648549] ata6: SATA link down (SStatus 0 SControl 300)
[ 3161.648567] ata6: limiting SATA link speed to 1.5 Gbps
[ 3166.641111] ata6: hard resetting link
[ 3166.990595] ata6: SATA link down (SStatus 0 SControl 310)
[ 3166.990611] ata6.00: disabled
[ 3167.010556] ata6: EH complete
[ 3167.010576] ata6.00: detaching (SCSI 5:0:0:0)
[ 3167.011128] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[ 3167.011153] sd 5:0:0:0: [sdc]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3167.011157] sd 5:0:0:0: [sdc] Stopping disk
[ 3167.011164] sd 5:0:0:0: [sdc] START_STOP FAILED
[ 3167.011166] sd 5:0:0:0: [sdc]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3491.087950] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3491.343510] ata6.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
[ 3491.343520] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3491.344372] ata6.00: configured for UDMA/133
[ 3491.357767] scsi 5:0:0:0: Direct-Access     ATA      ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 3491.357905] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 3491.357907] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 3491.357974] sd 5:0:0:0: [sdc] Write Protect is off
[ 3491.357978] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3491.358000] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3491.358068] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3491.391882]  sdc: sdc1
[ 3491.392269] sd 5:0:0:0: [sdc] Attached SCSI disk

[Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux