Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hello Gwendal,

Thank you for your information.
I think ata8 might different from other 3 PMPs. I'll try to update all
firmware but it is running resync on broken RAID now. So I can't do it soon.
By the way, both of ata8 and ata9 loses some HDDs also. Are those
affected by PMPs on ata7 and ata10? Why 3.1.x driver can work?

Best Regards,
Akira

> Now I see your problem. Indeed on ata7, ata10, we have a problem.
> I notice however some messages I did not see before:
>>> [    4.856382] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
>>> [    4.858742] ata7.00: hard resetting link
>>> [   14.843039] ata7.00: softreset failed (timeout)
>>> [   17.836402] ata7.15: qc timeout (cmd 0xe4)
> The later indicates that the PMP is stuck and the host can not read
> its internal register.
> Is it possible that the PMP in these 4 enclosures you are using have a
> different firmware than the other ones?
> Firmware 1.0114 is available at:
> http://www.siliconimage.com/support/searchresults.aspx?pid=26&cat=23
> 
> From the release notes:
> """- Fix SRST and initial two RegFIS Problem."""
> 
> Gwendal.

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux