Re: pata_sl82c105 is unable to properly handle dma (indeed it try to use mwdma2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On Wed, 2011-12-07 at 02:15 +0100, acrux_it@xxxxxxxxx wrote:
> New pata_sl82c105 is unable to properly handle dma (indeed it try to use 
> mwdma2).
> Old ide driver instead worked fine.
> 
> Tested on IBM 9114-275 where to use it i must boot with dma disabled i.e. with 
> libata.dma=0

Adding the linux-ide list on CC. Can you also send a dmesg with the old
IDE driver ? It might be useful to compare the values programmed by the
2 versions of the driver in the timing registers.

Cheers,
Ben.

> [...]
> pata_sl82c105 0000:00:03.1: enabling device (0144 -> 0145)
> scsi1 : pata_sl82c105
> scsi2 : pata_sl82c105
> ata1: PATA max MWDMA2 cmd 0x1f000 ctl 0x1f010 bmdma 0x1f040 irq 165
> ata2: PATA max MWDMA2 cmd 0x1f020 ctl 0x1f030 bmdma 0x1f048 irq 165
> ata1.00: ATAPI: IBM     DROM00205, NR38, max UDMA/33
> ata1.00: configured for MWDMA2
> [...]
> scsi 1:0:0:0: CD-ROM            IBM      DROM00205        NR38 PQ: 0 ANSI: 2
> sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi generic sg3 type 5
> [...]
> ata1: lost interrupt (Status 0x50)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA2
> ata1: EH complete
> sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 
> 20 00
> sr: Sense Key : Aborted Command [current] [descriptor]
> sr: Add. Sense: No additional sense information
> ata1: lost interrupt (Status 0x50)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Xdread, Read track info: 52 01 00 00 00 01 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA2
> ata1: EH complete
> sr0: CDROM (ioctl) error, command: Xdread, Read track info 52 01 00 00 00 01 
> 00 000
> sr: Sense Key : Aborted Command [current] [descriptor]
> sr: Add. Sense: No additional sense information
> ata1: lost interrupt (Status 0x50)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA2
> ata1: EH complete
> sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 
> 20 00
> sr: Sense Key : Aborted Command [current] [descriptor]
> sr: Add. Sense: No additional sense information
> ata1: lost interrupt (Status 0x50)
> ata1.00: limiting speed to MWDMA1:PIO4
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA1
> ata1: EH complete
> sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 
> 20 00
> sr: Sense Key : Aborted Command [current] [descriptor]
> sr: Add. Sense: No additional sense information
> ata1: lost interrupt (Status 0x50)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA1
> ata1: EH complete
> sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 
> 20 00
> sr: Sense Key : Aborted Command [current] [descriptor]
> sr: Add. Sense: No additional sense information
> ata1: lost interrupt (Status 0x50)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA1
> ata1: EH complete
> sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 
> 20 00
> sr: Sense Key : Aborted Command [current] [descriptor]
> sr: Add. Sense: No additional sense information
> ata1: lost interrupt (Status 0x50)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA1
> ata1: EH complete
> sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 
> 20 00
> sr: Sense Key : Aborted Command [current] [descriptor]
> sr: Add. Sense: No additional sense information
> ata1: lost interrupt (Status 0x50)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
> ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
>          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA1
> ata1: EH complete
> 
> 
> 
> 
> 
> 
> 
> cheers,
> --nico
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/linuxppc-dev


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux