Re: [PATCH] libata/sas: only set FROZEN flag if new EH is supported

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping on this -- Tejun, Brian, Jeff, this is a pretty annoying 2.6.39
regression which it would be good to have fixed in 3.0.

Thanks,
Nish

On 16.06.2011 [08:28:36 -0700], Nishanth Aravamudan wrote:
> On 16.06.2011 [08:28:39 -0500], Brian King wrote:
> > On 06/16/2011 02:51 AM, Tejun Heo wrote:
> > > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote:
> > >>> That looks like the right thing to do. For ipr's usage of
> > >>> libata, we don't have the concept of a port frozen state, so this flag
> > >>> should really never get set. The alternate way to fix this would be to
> > >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler
> > >>> is not NULL.
> > >>
> > >> It seemed like ipr is as you say, but I wasn't sure if it was
> > >> appropriate to make the change above in the common libata-scis code or
> > >> not. I don't want to break some other device on accident.
> > >>
> > >> Also, I tried your suggestion, but I don't think that can happen in
> > >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like
> > >> ap->ops typically gets set only after ata_port_alloc returns?
> > > 
> > > Maybe we can test error_handler in ata_sas_port_start()?
> > 
> > Good point. Since libsas is converted to the new eh now, we would need to have
> > this test.
> 
> Commit 7b3a24c57d2eeda8dba9c205342b12689c4679f9 ("ahci: don't enable
> port irq before handler is registered") caused a regression for CD-ROMs
> attached to the IPR SATA bus on Power machines:
> 
>   ata_port_alloc: ENTER
>   ata_port_probe: ata1: bus probe begin
>   ata1.00: ata_dev_read_id: ENTER
>   ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
>   ata1.00: ata_dev_read_id: ENTER
>   ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
>   ata1.00: limiting speed to UDMA7:PIO5
>   ata1.00: ata_dev_read_id: ENTER
>   ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
>   ata1.00: disabled
>   ata_port_probe: ata1: bus probe end
>   scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
> 
> The FROZEN flag added in that commit is only cleared by the new EH code,
> which is not used by ipr. Clear this flag in the SAS code if we don't
> support new EH.
> 
> Reported-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Nishanth Aravamudan <nacc@xxxxxxxxxx>
> 
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index d51f979..ebe1685 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
>   */
>  int ata_sas_port_start(struct ata_port *ap)
>  {
> +	/*
> +	 * the port is marked as frozen at allocation time, but if we don't
> +	 * have new eh, we won't thaw it
> +	 */
> +	if (!ap->ops->error_handler)
> +		ap->pflags &= ~ATA_PFLAG_FROZEN;
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(ata_sas_port_start);
> 
> 
> -- 
> Nishanth Aravamudan <nacc@xxxxxxxxxx>
> IBM Linux Technology Center

-- 
Nishanth Aravamudan <nacc@xxxxxxxxxx>
IBM Linux Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux