ide-dma: fix ide_build_dmatable() for TRM290

[Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>]

Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes,
judging from the code immediately preceding this check.  So, we must never try
to "split" the PRD for TRM290.

This is probably never hit anyway -- with the DMA buffers aligned to at least
512 bytes and ATAPI DMA not being used for non block I/O commands...

Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>

---
The patch is against the recent Linus' tree.
                                          
 drivers/ide/ide-dma.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6/drivers/ide/ide-dma.c
===================================================================
--- linux-2.6.orig/drivers/ide/ide-dma.c
+++ linux-2.6/drivers/ide/ide-dma.c
@@ -211,7 +211,7 @@ int ide_build_dmatable (ide_drive_t *dri
 				xcount = bcount & 0xffff;
 				if (is_trm290)
 					xcount = ((xcount >> 2) - 1) << 16;
-				if (xcount == 0x0000) {
+				else if (xcount == 0x0000) {
 	/* 
 	 * Most chipsets correctly interpret a length of 0x0000 as 64KB,
 	 * but at least one (e.g. CS5530) misinterprets it as zero (!).

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html