Linux IDE Archive

Thread Index

[Prev Page][Next Page]

Re: pata_via cd/dvd timeout problems
- From: Vlad
Re: [PATCH 6/7] blk_end_request: remove/unexport end_that_request_*
- From: Kiyoshi Ueda
Re: MDADM restart at system boot time
- From: Richard Scobie
Re: [PATCH 1/7] blk_end_request: add new request completion interface
- From: Kiyoshi Ueda
Re: [PATCH 6/7] blk_end_request: remove/unexport end_that_request_*
- From: Jens Axboe
RE: [PATCH 6/7] blk_end_request: remove/unexport end_that_request_*
- From: Halevy, Benny
CF-Card DMA problem
- From: Steffen D.
Re: sata_promise: port is slow to respond, reset failed
- From: Mikael Pettersson
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: sata_promise: port is slow to respond, reset failed
- From: Peter Favrholdt
Re: sata_promise: port is slow to respond, reset failed
- From: Chuck Ebbert
ICH Intel PATA short cable override...
- From: Daniel J Blueman
pata_pdc202xx_old bug? (ATA bus error)
- From: n
Re: sata_promise: port is slow to respond, reset failed
- From: Mikael Pettersson
Re: [Bugme-new] [Bug 8976] New: Regression (ata_piix): Kernel panic during driver initialization
- From: Mikael Pettersson
a disk timeout and a disk state
- From: Raz
Re: Resets on sil3124 & sil3726 PMP
- From: Petr Vandrovec
Re: [Bugme-new] [Bug 8976] New: Regression (ata_piix): Kernel panic during driver initialization
- From: Andrew Morton
Re: Resets on sil3124 & sil3726 PMP
- From: Richard Scobie
Re: sata_promise: port is slow to respond, reset failed
- From: Peter Favrholdt
Re: Resets on sil3124 & sil3726 PMP
- From: Robin H. Johnson
Re: libata not working for sis5533
- From: Patrizio Bassi
Re: Resets on sil3124 & sil3726 PMP
- From: Richard Scobie
Re: [PATCH 3/4] ide: make ide_rate_filter() also respect PIO and SW/MW DMA mode masks (take 2)
- From: Bartlomiej Zolnierkiewicz
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
- From: Bartlomiej Zolnierkiewicz
Re: libata not working for sis5533
- From: Jan Engelhardt
Re: libata equivalent for hdX=remap63
- From: Alexander E. Patrakov
pata_via cd/dvd timeout problems
- From: richard kennedy
Re: [PATCH 3/4] sis5513: clear prefetch and postwrite for ATAPI devices
- From: Sergei Shtylyov
Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- From: Sergei Shtylyov
Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- From: John Sigler
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: Resets on sil3124 & sil3726 PMP
- From: Tejun Heo
Re: CF as IDE on ICH6M using libata
- From: Tejun Heo
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: sata_promise: port is slow to respond, reset failed
- From: Tomi Orava
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: CF as IDE on ICH6M using libata
- From: Tejun Heo
HSM violation on bootup, ICH7 + ata_piix 2.6.22
- From: Eamonn Hamilton
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: [2/2] 2.6.23-rc5: known regressions with patches
- From: Michal Piotrowski
[1/2] 2.6.23-rc5: known regressions with patches
- From: Michal Piotrowski
Re: Resets on sil3124 & sil3726 PMP
- From: Petr Vandrovec
Re: Resets on sil3124 & sil3726 PMP
- From: Tejun Heo
Re: Stardom SATA HSM violation
- From: Tejun Heo
Re: [PATCH resubmit] /drivers/ata ioremap returncode check
- From: Tejun Heo
Re: sata_promise: port is slow to respond, reset failed
- From: Mikael Pettersson
Re: [PATCH 0/7] blk_end_request: full I/O completion handler
- From: Jens Axboe
Re: [PATCH 2/7] blk_end_request: add blk_rq_size() macros
- From: Jens Axboe
Re: [PATCH 1/7] blk_end_request: add new request completion interface
- From: Jens Axboe
[PATCH REGENERATED] ahci: reimplement port_map handling
- From: Tejun Heo
[PATCH 2/3] libata: clean up read/set native_max address functions
- From: Tejun Heo
[PATCH 1/3] libata: move ata_id_n_sectors() upward
- From: Tejun Heo
[PATCH #upstream-fixes]: libata clear horkage on ata_dev_init()
- From: Tejun Heo
Re: CF as IDE on ICH6M using libata
- From: Tejun Heo
HSM violation with ahci+WDC WD1600BEVS-22RST0
- From: Maurizio Monge
Re: sata_promise: port is slow to respond, reset failed
- From: Peter Favrholdt
Re: [BUG] pata_ali not working on a 64 bit system
- From: Luca Tettamanti
[no subject]
- From: Kantor Zsolt
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
- From: Sergei Shtylyov
[PATCH 2/4] hpt366: MWDMA filter for SATA cards
- From: Sergei Shtylyov
[PATCH 3/4] ide: make ide_rate_filter() also respect PIO and SW/MW DMA mode masks (take 2)
- From: Sergei Shtylyov
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: [PATCH 3/4] ide: make ide_rate_filter() also respect PIO and SW/MW DMA mode masks
- From: Sergei Shtylyov
[PATCH 3/4] ide: make ide_rate_filter() also respect PIO and SW/MW DMA mode masks
- From: Sergei Shtylyov
Re: [lm-sensors] [PATCH] drivers/firmware: const-ify DMI API and internals
- From: Jean Delvare
Re: CF as IDE on ICH6M using libata
- From: Alan Cox
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: CF as IDE on ICH6M using libata
- From: Eddie Hung
Re: sata_promise: port is slow to respond, reset failed
- From: Mikael Pettersson

[Kernel Announce] [Site Home] [IETF Annouce] [Security] [Netfilter] [Bugtraq]

Powered by Linux