Re: [PATCH] i2c: pca954x: Fix reset GPIO property name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alexandre,

On Tuesday 03 June 2014 10:38:53 Alexandre Courbot wrote:
> On 06/03/2014 09:22 AM, Laurent Pinchart wrote:
> > The DT bindings for the pca954x document that the reset GPIO is
> > specified through the "reset-gpios" property. However, the driver
> > erroneously uses a property name of "reset-gpio".
> > 
> > The GPIO DT bindings documentation mentions that
> > 
> > "GPIO properties should be named "[<name>-]gpios". The exact meaning of
> > each gpios property must be documented in the device tree binding for
> > each device."
> > 
> > The correct reset GPIO property name is thus "reset-gpios". Fix the
> > driver accordingly.
> 
> The plural form should be preferred indeed.
> 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> > 
> >   drivers/i2c/muxes/i2c-mux-pca954x.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > While commit dd34c37aa3e81715a1ed8da61fa438072428e188
> > 
> > Author: Thierry Reding <treding@xxxxxxxxxx>
> > Date:   Wed Apr 23 17:28:09 2014 +0200
> > 
> >      gpio: of: Allow -gpio suffix for property names
> >      
> >      Many bindings use the -gpio suffix in property names. Support this in
> >      addition to the -gpios suffix when requesting GPIOs using the new
> >      descriptor-based API.
> > 
> > adds support for the singular form of the property, the GPIO DT bindings
> > document the plural form only. I've thus decided to fix the driver instead
> > of the bindings, even though it could be argued that the singular form
> > makes more sense in this case. I've CC'ed the people involved with the
> > above commit for comments on that, and have no issue fixing the bindings
> > instead of the driver if the singular form is preferred.
> > 
> > diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c
> > b/drivers/i2c/muxes/i2c-mux-pca954x.c index 550bd36..73491ca 100644
> > --- a/drivers/i2c/muxes/i2c-mux-pca954x.c
> > +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
> > @@ -205,7 +205,7 @@ static int pca954x_probe(struct i2c_client *client,
> > 
> >   		int gpio;
> >   		
> >   		/* Get the mux out of reset if a reset GPIO is specified. */
> > 
> > -		gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags);
> > +		gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags);
> 
> Won't this break DT compatibility for potential users of this driver? (I
> cannot find any in mainline though)

Only if those users don't conform to the DT bindings documentation that 
mandates the plural form, and are thus broken already ;-)

> Considering that this GPIO is only acquired and set once and for all
> during probe (a very simple use-case), how about switching this to the
> gpiod interface instead? That way, you can take advantage of Thierry's
> patch and the plural form will work while also maintaining the singular
> form for backward compatibility.

Regardless of the singular vs. plural debate I think that's a good idea. I'll 
thus rework this patch.

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux