Re: [PATCH] i2c-designware-pcidrv: fix the incorrect return of idle callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




于 2014年01月29日 16:35, Mika Westerberg 写道:
> On Tue, Jan 28, 2014 at 07:30:35PM +0100, Wolfram Sang wrote:
>> On Tue, Jan 28, 2014 at 01:48:28PM +0800, xinhui.pan wrote:
>>> From: "xinhui.pan" <xinhuix.pan@xxxxxxxxx>
>>>
>>> i2c_dw_pci_runtime_idle should return -EBUSY rather than zero if it do success.
>>
>> I don't understand...
>>
>>> Otherwise rpm_idle will call pm_suspend again and that may cause pm_schedule_suspend delay invalidate.
>>> 	
>>> Signed-off-by: bo.he <bo.he@xxxxxxxxx>
>>> Signed-off-by: xinhui.pan <xinhuix.pan@xxxxxxxxx>
>>> ---
>>>  drivers/i2c/busses/i2c-designware-pcidrv.c |    4 ++--
>>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
>>> index f6ed06c..96e81f6 100644
>>> --- a/drivers/i2c/busses/i2c-designware-pcidrv.c
>>> +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
>>> @@ -190,8 +190,8 @@ static int i2c_dw_pci_runtime_idle(struct device *dev)
>>>  	int err = pm_schedule_suspend(dev, 500);
>>>  	dev_dbg(dev, "runtime_idle called\n");
>>>  
>>> -	if (err != 0)
>>> -		return 0;
>>> +	if (err)
>>> +		return err;
>>>  	return -EBUSY;
>>
>> ... it does return EBUSY when pm_schedule_suspend() succeeds? It only
>> returns 0 if it does not succeed (for which I don't know if this is an
>> apropriate behaviour). Mika?
> 
> If I understand correctly, pm_schedule_suspend(dev, 500) is there because
> we want to runtime suspend in 500 ms. It then returns -EBUSY to prevent PM
> runtime from carrying on suspend on it's own. However, I have no idea where
> this magical 500 ms requirement comes from.
> 
> If we fail to schedule suspend we let the PM core to do whatever it thinks
> suitable (in this case I suppose it suspends the device).
> 

Hi ,Mika
  If the callback returns 0,it means pm_schedule_suspend fails,
also means rpm_check_suspend_allowed(pm_schedule_suspend calls it) 
returns nonzero value.As a result,rpm_suspend will be called by rpm_idle.
  However in rpm_idle, rpm_check_suspend_allowed is called at first,too.
and the return value is treated as it is.But rpm_idle just returns 
without doing anything(rpm_suspend is not called). 
  in both case above,why goes in different ways? I am confused.
 
> I think the whole idle dance could be replaced with a use of runtime PM
> autosuspend, just like we do in the platform version of the driver.
> 
> Xinghui,
> 
> Is this a real problem that you are trying to solve?
> 

To be honest,we got many panic when testing.
But is not caused by this driver I think.
while checking problems,we found these confusing codes by accident.

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux