Re: [PATCH v10 3/4] drivers/i2c/busses/i2c-at91.c: add new driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Hi Carsten,

On Wed, 25 Apr 2012, Carsten Behling wrote:
I cannot find the fix for the RXRDY overrun bug in this patch:

The fix refers to the bug when RXRDY flag was masked out by TXCOMP,
reported by Hubert. I hope this is fixed with v10.

here you only report the status flags after a complete transfer, but an overrun can happen after every byte. After reading the status register after an overrun for the next byte this info will be lost !

Right, I didn't consider this. Would you mind to test if the attached patch on top of v10 fixes your problem?


P.S. Are you using a RM9200? Seems that this SOC has some problems...

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 97f4365..df0f6ed 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -186,9 +186,11 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
 	else if (irqstatus & AT91_TWI_TXRDY)

+	/* catch error flags */
+	dev->transfer_status |= status;
 	if (irqstatus & AT91_TWI_TXCOMP) {
-		dev->transfer_status = status;

@@ -203,6 +205,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);

+	dev->transfer_status = 0;
 	if (dev->msg->flags & I2C_M_RD) {
 		unsigned start_flags = AT91_TWI_START;

To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at

[LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [XFree86]

Add to Google Powered by Linux