- Subject: Re: [RFC PATCH 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Date: Wed, 1 Feb 2012 17:17:30 -0700
- Cc: hs@xxxxxxx, davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx, Wolfgang Denk <wd@xxxxxxx>, netdev@xxxxxxxxxxxxxxx, devicetree-discuss@xxxxxxxxxxxxxxxx, linux-mtd@xxxxxxxxxxxxxxxxxxx, linux-i2c@xxxxxxxxxxxxxxx, Ben Dooks <ben-linux@xxxxxxxxx>, David Woodhouse <dwmw2@xxxxxxxxxxxxx>, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
- In-reply-to: <4F2911DD.6010405@mvista.com>
- References: <1327308967-8092-1-git-send-email-hs@denx.de> <1327308967-8092-8-git-send-email-hs@denx.de> <20120130203252.GX28397@ponder.secretlab.ca> <4F27E6E0.1050608@denx.de> <4F2911DD.6010405@mvista.com>
- User-agent: Mutt/1.5.21 (2010-09-15)
On Wed, Feb 01, 2012 at 02:20:13PM +0400, Sergei Shtylyov wrote:
> Hello.
>
> On 31-01-2012 17:04, Heiko Schocher wrote:
>
> >>On Mon, Jan 23, 2012 at 09:56:07AM +0100, Heiko Schocher wrote:
> >>>- AM1808 based board
> >>>- 64 MiB DDR ram
> >>>- 2 MiB Nor flash
> >>>- 128 MiB NAND flash
> >>>- use internal RTC
> >>>- I2C support
> >>>- hwmon lm75 support
> >>>- UBI/UBIFS support
> >>>- MMC support
> >>>- USB OTG support
>
> >>>Signed-off-by: Heiko Schocher<hs@xxxxxxx>
> >>>Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> >>>Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> >>>Cc: davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
> >>>Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx
> >>>Cc: linux-i2c@xxxxxxxxxxxxxxx
> >>>Cc: netdev@xxxxxxxxxxxxxxx
> >>>Cc: David Woodhouse<dwmw2@xxxxxxxxxxxxx>
> >>>Cc: Ben Dooks<ben-linux@xxxxxxxxx>
> >>>Cc: Wolfram Sang<w.sang@xxxxxxxxxxxxxx>
> >>>Cc: Sekhar Nori<nsekhar@xxxxxx>
> >>>Cc: Kevin Hilman<khilman@xxxxxx>
> >>>Cc: Wolfgang Denk<wd@xxxxxxx>
>
> >>>---
> >>>- post this board support with USB support, even though
> >>> USB is only working with the 10 ms "workaround", posted here:
> >>> http://comments.gmane.org/gmane.linux.usb.general/54505
> >>> I see this issue also on the AM1808 TMDXEXP1808L evalboard.
> >>>- MMC and USB are not using OF support yet, ideas how to port
> >>> this are welcome. I need for USB and MMC boards board
> >>> specific callbacks, how to solve this with OF support?
>
> [...]
>
> >>>diff --git a/arch/arm/boot/dts/enbw_cmc.dts b/arch/arm/boot/dts/enbw_cmc.dts
> >>>new file mode 100644
> >>>index 0000000..e5995ce
> >>>--- /dev/null
> >>>+++ b/arch/arm/boot/dts/enbw_cmc.dts
> [...]
>
> >>>+ compatible = "ns16550a";
>
> >>Should include a string for the specific device. Something like:
>
> >> compatible = "ti,da800", "ns16550a";
>
> >added.
>
> Note that there's no DA800 chip, only DA828, DA830, and DA850 AFAIK.
Right, so the compatible string should reflect that.
g.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[LM Sensors]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Linux Audio Users]
[Photo]
[Yosemite News]
[Yosemite Photos]
[Free Online Dating]
[Linux Kernel]
[Linux SCSI]
[XFree86]