Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
- [PATCH v2] dt-bindings: nxp,pnx-i2c: Convert to dtschema, Animesh Agarwal
- [PATCH 0/2] Add ADP1050 support,
Radu Sabau
- [PATCH] dt-bindings: nxp,i2c-pnx: Convert to dtschema,
Animesh Agarwal
- [PATCH] i2c: Add msgs is NULL check,
Youwan Wang
- [PULL REQUEST] i2c-for-6.9-rc1,
Wolfram Sang
- [PATCH v2 0/4] Add RIIC support for Renesas RZ/V2H SoC,
Prabhakar
- [PATCH] i2c-mv46xxx driver, Thore Olthoff
- [GIT PULL] i2c-host changes for v6.9 - part 2,
Andi Shyti
- [syzbot] [i2c?] KASAN: stack-out-of-bounds Write in i801_isr (3), syzbot
- Boot hang with SiFive PLIC when routing I2C-HID level-triggered interrupts,
Eva Kurchatova
- [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode, Mukesh Kumar Savaliya
- [PATCH v4] i2c: acpi: Unbind mux adapters before delete, Hamish Martin
- [PATCH v4] i2c: muxes: pca954x: Allow sharing reset GPIO, Chris Packham
- [PATCH v3] i2c: i801: Add lis3lv02d for Dell Precision M6800,
Patrick Höhn
- [PATCH] media: dt-bindings: qcom,i2c-cci: Fix OV7251 'data-lanes' entries,
Rob Herring
- [PATCH v2 1/2] i2c: viai2c: Fix some minor style issues,
Hans Hu
- [PATCH 1/2] i2c: viai2c: Fix some minor style issues,
Hans Hu
- [GIT PULL] i2c-host changes for v6.9 - part 2 (i2c zhaoxin),
Andi Shyti
- [PULL REQUEST] i2c-for-6.8-rc8,
Wolfram Sang
- [PATCH 0/5] Add RIIC support for Renesas RZ/V2H SoC,
Prabhakar
- [GIT PULL] i2c-host changes for v6.9,
Andi Shyti
- [GIT PULL] i2c-host fixes for v6.8,
Andi Shyti
- [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode,
Mukesh Kumar Savaliya
- [PATCH] i2c: exynos5: Revert "i2c: exynos5: Init data before registering interrupt handler",
Andi Shyti
- [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode,
Mukesh Kumar Savaliya
- Re: [linux-next:master 11602/11963] ERROR: modpost: "acpi_device_notify_remove" [drivers/i2c/i2c-core.ko] undefined!, wsa-dev@xxxxxxxxxxxxxxxxxxxx
- [PATCH] i2c: sprd: Convert to platform remove callback returning void,
Uwe Kleine-König
- [PATCH v3 00/11] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts,
Théo Lebrun
- [PATCH v3 09/11] i2c: nomadik: sort includes, Théo Lebrun
- [PATCH v3 08/11] i2c: nomadik: support Mobileye EyeQ5 I2C controller, Théo Lebrun
- [PATCH v3 02/11] i2c: nomadik: rename private struct pointers from dev to priv, Théo Lebrun
- [PATCH v3 03/11] i2c: nomadik: simplify IRQ masking logic, Théo Lebrun
- [PATCH v3 01/11] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Théo Lebrun
- [PATCH v3 04/11] i2c: nomadik: use bitops helpers, Théo Lebrun
- [PATCH v3 11/11] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor, Théo Lebrun
- [PATCH v3 06/11] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout, Théo Lebrun
- [PATCH v3 10/11] MIPS: mobileye: eyeq5: add 5 I2C controller nodes, Théo Lebrun
- [PATCH v3 07/11] i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetree, Théo Lebrun
- [PATCH v3 05/11] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer, Théo Lebrun
- Re: (subset) [PATCH v3 00/11] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts, Andi Shyti
- [PATCH RFT] i2c: i801: Call i2c_register_spd for muxed child segments, Heiner Kallweit
- riscv: ERROR: modpost: "acpi_device_notify_remove" [drivers/i2c/i2c-core.ko] undefined!, Naresh Kamboju
- [PATCH v3] i2c: exynos5: Init data before registering interrupt handler,
Jesper Nilsson
- [PATCH v2] i2c: aspeed: Fix the dummy irq expected print,
Tommy Huang
- [PATCH] Documentation: i2c: Document that client auto-detection is a legacy mechanism,
Heiner Kallweit
- [PATCH v3] i2c: i801: Avoid potential double call to gpiod_remove_lookup_table,
Heiner Kallweit
- [PATCH v2] i2c: exynos5: Init data before registering interrupt handler,
Jesper Nilsson
- [PATCH v4 00/18] Add suspend to ram support for PCIe on J7200,
Thomas Richard
- [PATCH v4 01/18] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Thomas Richard
- [PATCH v4 02/18] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Thomas Richard
- [PATCH v4 03/18] i2c: omap: wakeup the controller during suspend() callback, Thomas Richard
- [PATCH v4 04/18] mux: add mux_chip_resume() function, Thomas Richard
- [PATCH v4 05/18] mux: mmio: add resume support, Thomas Richard
- [PATCH v4 06/18] phy: ti: phy-j721e-wiz: use dev_err_probe() instead of dev_err(), Thomas Richard
- [PATCH v4 07/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Thomas Richard
- [PATCH v4 08/18] phy: ti: phy-j721e-wiz: add resume support, Thomas Richard
- [PATCH v4 09/18] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk, Thomas Richard
- [PATCH v4 10/18] phy: cadence-torrent: register resets even if the phy is already configured, Thomas Richard
- [PATCH v4 11/18] phy: cadence-torrent: add already_configured to struct cdns_torrent_phy, Thomas Richard
- [PATCH v4 13/18] phy: cadence-torrent: add suspend and resume support, Thomas Richard
- [PATCH v4 14/18] PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup(), Thomas Richard
- [PATCH v4 15/18] PCI: cadence: Set cdns_pcie_host_init() global, Thomas Richard
- [PATCH v4 16/18] PCI: j721e: Use dev_err_probe() in the probe() function, Thomas Richard
- [PATCH v4 17/18] PCI: j721e: Add reset GPIO to struct j721e_pcie, Thomas Richard
- [PATCH v4 18/18] PCI: j721e: Add suspend and resume support, Thomas Richard
- [PATCH v4 12/18] phy: cadence-torrent: remove noop_ops phy operations, Thomas Richard
- [PATCH] i2c: exynos5: Init data before registering interrupt handler,
Jesper Nilsson
- [PATCH v3] i2c: acpi: Unbind mux adapters before delete,
Hamish Martin
- [PATCH v2] i2c: i801: Fix using mux_pdev before it's set,
Heiner Kallweit
- [PATCH v2] i2c: i801: Avoid potential double call to gpiod_remove_lookup_table,
Heiner Kallweit
- [PATCH v2] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments,
Heiner Kallweit
- [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode,
Mukesh Kumar Savaliya
- [PATCH v2 1/1] i2c: acpi: Unbind mux adapters before delete,
Hamish Martin
- [PATCH v2 00/11] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts,
Théo Lebrun
- [PATCH v2 01/11] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Théo Lebrun
- [PATCH v2 02/11] dt-bindings: hwmon: lm75: use common hwmon schema, Théo Lebrun
- [PATCH v2 04/11] i2c: nomadik: simplify IRQ masking logic, Théo Lebrun
- [PATCH v2 05/11] i2c: nomadik: use bitops helpers, Théo Lebrun
- [PATCH v2 03/11] i2c: nomadik: rename private struct pointers from dev to priv, Théo Lebrun
- [PATCH v2 06/11] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer, Théo Lebrun
- [PATCH v2 07/11] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout, Théo Lebrun
- [PATCH v2 08/11] i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetree, Théo Lebrun
- [PATCH v2 09/11] i2c: nomadik: support Mobileye EyeQ5 I2C controller, Théo Lebrun
- [PATCH v2 10/11] MIPS: mobileye: eyeq5: add 5 I2C controller nodes, Théo Lebrun
- [PATCH v2 11/11] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor, Théo Lebrun
- Re: [PATCH v2 00/11] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts, Andi Shyti
- [PATCH RFT 0/3] i2c: mpc: use proper binding for transfer timeouts,
Wolfram Sang
- [PATCH] i2c: cadence: Add RISCV architecture support, Ji Sheng Teoh
- [PATCH 0/1] I2C mux ACPI SSDT overlay removal issue,
Hamish Martin
- [PATCH v2] mux: convert mux_chip->mux to flexible array,
Jacob Keller
- [PATCH v2 00/31] fsi: Interrupt support,
Eddie James
- [PATCH v2 03/31] fsi: Use a defined value for default echo delay, Eddie James
- [PATCH v2 02/31] fsi: Improve master indexing, Eddie James
- [PATCH v2 01/31] fsi: Move slave definitions to fsi-slave.h, Eddie James
- [PATCH v2 06/31] fsi: core: Improve master read/write/error traces, Eddie James
- [PATCH v2 05/31] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency, Eddie James
- [PATCH v2 04/31] fsi: Expose master-specific local bus clock divider, Eddie James
- [PATCH v2 09/31] fsi: aspeed: Add AST2700 support, Eddie James
- [PATCH v2 08/31] dt-bindings: fsi: Add AST2700 compatible, Eddie James
- [PATCH v2 07/31] fsi: core: Add slave error trace, Eddie James
- [PATCH v2 13/31] fsi: hub: Use common initialization and link enable, Eddie James
- [PATCH v2 12/31] fsi: core: Add common regmap master functions, Eddie James
- [PATCH v2 15/31] fsi: aspeed: Remove cfam reset sysfs file in error path and remove, Eddie James
- [PATCH v2 14/31] fsi: aspeed: Use common initialization and link enable, Eddie James
- [PATCH v2 11/31] fsi: core: Allow cfam device type aliases, Eddie James
- [PATCH v2 16/31] fsi: aspeed: Refactor trace functions, Eddie James
- [PATCH v2 10/31] fsi: core: Add slave spinlock, Eddie James
- [PATCH v2 18/31] fsi: aspeed: Only read result register for successful read, Eddie James
- [PATCH v2 19/31] fsi: aspeed: Switch to spinlock, Eddie James
- [PATCH v2 21/31] fsi: aspeed: Use common master error handler, Eddie James
- [PATCH v2 20/31] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset, Eddie James
- [PATCH v2 24/31] fsi: hub: Add interrupt support, Eddie James
- [PATCH v2 23/31] fsi: aspeed: Add interrupt support, Eddie James
- [PATCH v2 17/31] fsi: aspeed: Don't clear all IRQs during OPB transfers, Eddie James
- [PATCH v2 27/31] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer, Eddie James
- [PATCH v2 29/31] i2c: fsi: Define a function to check status error bits, Eddie James
- [PATCH v2 25/31] i2c: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v2 30/31] i2c: fsi: Add boolean for skip stop command on abort, Eddie James
- [PATCH v2 22/31] fsi: core: Add interrupt support, Eddie James
- [PATCH v2 28/31] i2c: fsi: Remove list structure of ports, Eddie James
- [PATCH v2 31/31] i2c: fsi: Add interrupt support, Eddie James
- [PATCH v2 26/31] i2c: fsi: Improve formatting, Eddie James
- Re: [PATCH v2 00/31] fsi: Interrupt support, Rob Herring
- dtschema: i2c: messy situation about timeouts,
Wolfram Sang
- [PATCH V2] dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C,
Peng Fan (OSS)
- [PATCH] i2c: imx-lpi2c: add generic GPIO recovery for LPI2C,
carlos . song
- [PATCH] i2c: remove redundant condition,
zoanana990
- [PATCH v2 0/5] dt-bindings: hwmon: common schema,
Krzysztof Kozlowski
- [PULL REQUEST] i2c-for-6.8-rc6,
Wolfram Sang
- [PATCH v4 00/39] Add support for sam9x7 SoC family,
Varshini Rajendran
- [GIT PULL] i2c-host fixes for v6.8-rc6, Andi Shyti
- [PATCH v4 0/4] i2c: thunderx: Marvell thunderx i2c changes,
Piyush Malgujar
- [PATCH] i2c: i801: Fix using mux_pdev before it's set, Heiner Kallweit
- [PATCH] i2c: i801: Avoid potential double call to gpiod_remove_lookup_table,
Heiner Kallweit
- [PATCH RFC 0/2] i2c: i801: Call i2c_register_spd for muxed child segments,
Heiner Kallweit
- [PATCH v2] i2c: i801: Add lis3lv02d for Dell Precision M6800 v2 Bios: A26,
Patrick Höhn
- [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt,
Rob Herring
- [PATCH v3] i2c: imx: when being a target, mark the last read as processed,
Wolfram Sang
- irq/51-DLL075B:01 in D state without touchpad usage, interrupts increase,
Paul Menzel
- [PATCH] i2c: constify the struct device_type usage,
Ricardo B. Marliere
- [PATCH] Add lis3lv02d for Dell Precision M6800,
Patrick Höhn
- [PULL REQUEST] i2c-for-6.8-rc5,
Wolfram Sang
- [PATCH v5] hid-ft260: Add serial driver, Christina Quast
- [PATCH] i2c: remove redundant conditions, zoanana990
- [PATCH] i2c: aspeed: Fix the dummy irq expected print,
Tommy Huang
- [PATCH 00/33] fsi: Interrupt support,
Eddie James
- [PATCH 04/33] fsi: Improve master indexing, Eddie James
- [PATCH 03/33] fsi: Move slave definitions to fsi-slave.h, Eddie James
- [PATCH 01/33] dt-bindings: clock: ast2600: Add FSI clock, Eddie James
- [PATCH 12/33] fsi: core: Allow cfam device type aliases, Eddie James
- [PATCH 10/33] fsi: aspeed: Add AST2700 support, Eddie James
- [PATCH 09/33] fsi: core: Add slave error trace, Eddie James
- [PATCH 18/33] fsi: aspeed: Don't clear all IRQs during OPB transfers, Eddie James
- [PATCH 08/33] fsi: core: Improve master read/write/error traces, Eddie James
- [PATCH 11/33] fsi: core: Add slave spinlock, Eddie James
- [PATCH 21/33] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset, Eddie James
- [PATCH 19/33] fsi: aspeed: Only read result register for successful read, Eddie James
- [PATCH 05/33] fsi: Use a defined value for default echo delay, Eddie James
- [PATCH 17/33] fsi: aspeed: Refactor trace functions, Eddie James
- [PATCH 26/33] ARM: dts: aspeed: FSI interrupt support, Eddie James
- [PATCH 20/33] fsi: aspeed: Switch to spinlock, Eddie James
- [PATCH 16/33] fsi: aspeed: Remove cfam reset sysfs file in error path and remove, Eddie James
- [PATCH 22/33] fsi: aspeed: Use common master error handler, Eddie James
- [PATCH 23/33] fsi: core: Add interrupt support, Eddie James
- [PATCH 32/33] i2c: fsi: Add boolean for skip stop command on abort, Eddie James
- [PATCH 30/33] i2c: fsi: Remove list structure of ports, Eddie James
- [PATCH 24/33] fsi: aspeed: Add interrupt support, Eddie James
- [PATCH 31/33] i2c: fsi: Define a function to check status error bits, Eddie James
- [PATCH 25/33] fsi: hub: Add interrupt support, Eddie James
- [PATCH 29/33] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer, Eddie James
- [PATCH 28/33] i2c: fsi: Improve formatting, Eddie James
- [PATCH 15/33] fsi: aspeed: Use common initialization and link enable, Eddie James
- [PATCH 33/33] i2c: fsi: Add interrupt support, Eddie James
- [PATCH 27/33] i2c: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH 13/33] fsi: core: Add common regmap master functions, Eddie James
- [PATCH 06/33] fsi: Expose master-specific local bus clock divider, Eddie James
- [PATCH 02/33] clk: ast2600: Add FSI parent clock with correct rate, Eddie James
- [PATCH 14/33] fsi: hub: Use common initialization and link enable, Eddie James
- [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency, Eddie James
- [GIT PULL] i2c-host fixes for v6.8-rc5,
Andi Shyti
- [PATCH 00/13] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts,
Théo Lebrun
- [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Théo Lebrun
- [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Théo Lebrun
- [PATCH 03/13] dt-bindings: hwmon: lm75: add label property, Théo Lebrun
- [PATCH 05/13] i2c: nomadik: simplify IRQ masking logic, Théo Lebrun
- [PATCH 04/13] i2c: nomadik: rename private struct pointers from dev to priv, Théo Lebrun
- [PATCH 06/13] i2c: nomadik: use bitops helpers, Théo Lebrun
- [PATCH 07/13] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer, Théo Lebrun
- [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Théo Lebrun
- [PATCH 10/13] i2c: nomadik: support Mobileye EyeQ5 I2C controller, Théo Lebrun
- [PATCH 11/13] MIPS: mobileye: eyeq5: add 5 I2C controller nodes, Théo Lebrun
- [PATCH 12/13] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor, Théo Lebrun
- [PATCH 13/13] MIPS: mobileye: eyeq5: add resets to I2C controllers, Théo Lebrun
- [PATCH 08/13] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout, Théo Lebrun
- Re: [PATCH 00/13] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts, Linus Walleij
- [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200,
Thomas Richard
- [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Thomas Richard
- [PATCH v3 01/18] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Thomas Richard
- [PATCH v3 04/18] i2c: omap: wakeup the controller during suspend() callback, Thomas Richard
- [PATCH v3 05/18] mux: add mux_chip_resume() function, Thomas Richard
- [PATCH v3 06/18] mux: mmio: add resume support, Thomas Richard
- [PATCH v3 03/18] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Thomas Richard
- [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Thomas Richard
- [PATCH v3 09/18] phy: ti: phy-j721e-wiz: add resume support, Thomas Richard
- [PATCH v3 10/18] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk, Thomas Richard
- [PATCH v3 12/18] phy: cadence-torrent: add already_configured to struct cdns_torrent_phy, Thomas Richard
- [PATCH v3 07/18] phy: ti: phy-j721e-wiz: use dev_err_probe() instead of dev_err(), Thomas Richard
- [PATCH v3 15/18] PCI: cadence: extract link setup sequence from cdns_pcie_host_setup(), Thomas Richard
- [PATCH v3 16/18] PCI: cadence: set cdns_pcie_host_init() global, Thomas Richard
- [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie, Thomas Richard
- [PATCH v3 18/18] PCI: j721e: add suspend and resume support, Thomas Richard
- [PATCH v3 11/18] phy: cadence-torrent: register resets even if the phy is already configured, Thomas Richard
- [PATCH v3 13/18] phy: cadence-torrent: remove noop_ops phy operations, Thomas Richard
- [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support, Thomas Richard
- Re: [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200, Philipp Stanner
- Re: [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200, Bjorn Helgaas
- [PATCH] i2c: i801: Fix block process call transactions,
Jean Delvare
- [PATCH v3 0/6] i2c: designware: Generic polling mode code,
Jarkko Nikula
- Re: Potential bug in SMBus kernel module,
Jean Delvare
- [PATCH v4] i2c: i2c-qcom-geni: Correct I2C TRE sequence,
Viken Dadhaniya
- [PATCH] i2c: pasemi: split driver into two separate modules,
Arnd Bergmann
- Re: `intel_lpss_pci_driver_init` takes 23.8 ms,
Paul Menzel
- [PATCH 0/3] i2c: i801: Avoid potential issue in i801_check_post and cosmetic improvements,
Heiner Kallweit
- [PATCH] i2c: Remove redundant comparison in npcm_i2c_reg_slave,
Rand Deeb
- [PATCH v2 0/9] i2c: designware: Generic polling mode code,
Jarkko Nikula
- [PATCH v3 0/4] i2c: thunderx: Marvell thunderx i2c changes,
Piyush Malgujar
- [PULL REQUEST] i2c-for-6.8-rc3,
Wolfram Sang
- [REGRESSION] `lis3lv02d_i2c_suspend()` causes `unbalanced disables for regulator-dummy` and `Failed to disable Vdd_IO: -EIO`,
Paul Menzel
- [PATCH v3 0/5] i2c: i801: collection of further improvements / refactorings,
Heiner Kallweit
- [PATCH v2 0/5] i2c: i801: collection of further improvements / refactorings,
Heiner Kallweit
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]