I was being held incommunicado by my phone provider! All I could get from my voice service was a busy tone. My voice and DSL were out for several hours while the repaired the central office equipment. <<Charley>> F3KT wrote: > Hello, > > Fine job everybody did. > I'll try it in a few .... months. > But this morning Charles's link : > http://k4gbb.no-ip.info/docs/Raspberry.html > Seems not working. May be address has been changed ? > > > Best 73 Michel F3KT > > -----Message d'origine----- > De : Bernard Pidoux [mailto:bernard.pidoux@xxxxxxx] > Envoyé : mardi 4 septembre 2012 23:02 > À : Paul Lewis > Cc : C Schuman; f6bvp; List for the LINUX version of FBB; Alejandro Santos; > Arno Verhoeven; Lee Woldanski; F3KT; linux-hams > Objet : Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success > > Hello Paul, > > A deb package for Raspberry Pi should be available in a reasonable delay > (...) > Meanwhile, Charley k4gbb has come with a very convenient online html > document to start AX.25 installation on your RPi. > > http://k4gbb.no-ip.info/docs/Raspberry.html > > 73 de Bernard, f6bvp > > > Le 04/09/2012 22:46, Paul Lewis a écrit : >> Ok Charles >> >> I think I would be the only node in the UK using Frac on this test >> system :( Another learning curve and challenge.. >> 73 Paul g4apl >> >> In message <50466721.6000209@xxxxxxxxxxxxxx>, C Schuman >> <k4gbb1@xxxxxxxxxxxxxx> writes >>> Paul, >>> I am using the FPAC node. It is based on the ROSE protocol, but >>> works well with NetRom and Flex Net. We have approx 40 ROSE nodes >>> linked together via AxUDP. >>> >>> <<Charley>> >>> k4gbb >>> >>> Paul Lewis wrote: >>>> Hello All >>>> >>>> Thanks Bernard and Charles. >>>> >>>> Is there a NODE package for the "Pi" as I have used node(3.3) for a >>>> decade now. On my main system. >>>> 73 de Paul g4apl >>>> >>>> In message <501D2C69.80304@xxxxxxx>, f6bvp <f6bvp@xxxxxxx> writes >>>>> One suggestion before executing ./Instax25.new script I noticed >>>>> that /tmp partition was too small and could be full aborting some >>>>> installation process. >>>>> I suggest to unmount this partition : >>>>> >>>>> sudo umount -l /tmp >>>>> >>>>> A /tmp file will remain however and will do it. >>>>> >>>>> 73 de Bernard, f6bvp >>>>> >>>>> >>>>> On 04/08/2012 14:21, f6bvp wrote: >>>>>> Hello all, >>>>>> >>>>>> This is my first debian package ! >>>>>> >>>>>> >>>>>> > http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1. >>>>>> 9.080312.ax25+-10.00.Custom_armhf.deb >>>>>> >>>>>> >>>>>> This is the raspbian kernel image including AX.25 modules (ax25, >>>>>> 6pack, netrom, rose, mkiss,...) >>>>>> >>>>>> From your RaspBerry Pi you can download it with wget >>>>>> >>>>>> wget >>>>>> >>>>>> > http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1. >>>>>> 9.080312.ax25+-10.00.Custom_armhf.deb >>>>>> >>>>>> >>>>>> To install it : >>>>>> sudo dpkg -i >>>>>> linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_arm >>>>>> hf.deb >>>>>> >>>>>> >>>>>> Edit /boot/config.txt and add a line at the end with # for more >>>>>> options see http://elinux.org/RPi_config.txt kernel >>>>>> vmlinuz-3.1.9.080312.ax25+ >>>>>> >>>>>> reboot >>>>>> >>>>>> Then download K4GBB install ax25 script for installing ax25 >>>>>> libraries, tools and apps. >>>>>> >>>>>> sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new >>>>>> sudo chmod +x Instax25.new >>>>>> ./Instax25.new >>>>>> >>>>>> You may download a sample ax25 device init script : >>>>>> sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25 >>>>>> >>>>>> and a sample /etc/ax25/ax25ipd.conf sudo wget >>>>>> http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf >>>>>> >>>>>> Then you also need to edit /etc/ax25/axports such this example : >>>>>> sudo wget http://f6bvp.free.fr/logiciels/ax25/axports >>>>>> >>>>>> I may have missed some details. >>>>>> >>>>>> 73 de Bernard, f6bvp >>>>>> _______________________________________________ >>>>>> xfbb maillist - xfbb@xxxxxxxxx >>>>>> http://mailman.f6fbb.org/mailman/listinfo/xfbb >>>>> -- >>>>> To unsubscribe from this list: send the line "unsubscribe >>>>> linux-hams" in the body of a message to majordomo@xxxxxxxxxxxxxxx >>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html